Web link to a report and based on the opportunity name field

Similar Questions

• size of disk usage report BUT based on the type of storage used

  It is an interesting question. I must point out a use of the vms in the UK disc. (that's the easy part) where I would appreciate help is...

  lets say I have 50 VMS, but out of these 50 vms, there are two types of storage: drive fast and slow, I can return my virtual machines.

  What I currently have is my data stores named in a way where I can ask out of them as a way to do... I hope. I will name my stores of data such as:

  ds7k-01 (slow disk)

  or dsSSD-01(fast disk)

  and lets say

  VMA uses datastore ds7k-01

  VMB uses datastore dsSSD-01

  I need to know how can I run my report and based on a key word in the name of the data store (key word is 7 k or SSD), and have it fill in the correct field in my report.

  
  

  is the warning, here's how I created my report... so should incorporate into this stle of script...

  the output of my report currently looks like this:

  VM, cpu, memory

  2 6 VMA

  I want it to look like this

  CPU, memory, slowdisk, VM, fastdisk

  VMA 2 6 100 0 (better yet, if it is zero, do not put a 0 in the field.)

  4 8 0 200 VMB

  snipit of the script...

  $reportedvm = "" | Select-Object VM, CPU, memory

  $reportedvm. VirtualMachineName = $vm.name

  $reportedvm. CPU = $VM. ExtensionData.Summary.config.numcpu

  $reportedvm. Memory = $vm. Extensiondata.Summary.Config.memorySizeMB

  ...

  ...

  ...

  

  Right answer

  Yep, I missed a pretty crucial part, sorry!

  Must be:

  $fastdiskGB = ($VM |) Get-hard drive | Where {$_.} {Filename-match "^ \[dsSSD"} | Measure - Object - sum - CapacityGB property). Sum

  $slowdiskGB = ($VM |) Get-hard drive | Where {$_.} {Filename-match "^ \[ds7k"} | Measure - Object - sum - CapacityGB property). Sum

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Files and folders with the same name

  I am trying to unzip some files and folders and it works fine on my computer with Windows XP. However, when you use Windows Vista I can't because there are folders and files with the same name. After an internet search, it seems that the only suggestion is to extract the files in separate folders which then would allow them to keep the same name. The problem is I want what they in the same folder and they need to have the names they have.

  NOTE: I do have two files with the same name in the same folder, I have a folder and a file with the same name. I would have thought that this would be acceptable because they are two things separate, and given that it's great under XP.

  All solutions?

  You are right, if I make a file and a text file with the same name, it works fine. However, when I try to extract the files I need it tells me that there is already a file with the same name as the folder. He goes to tell me to choose a new name but my only options are 'try again', 'jump' or 'Cancel '.

  I think I can understand what the problem is. For some reason when you download the zip file, the computer seems to have added a few files side with any format other than "file." It is those who have the same name as the folders as if they were, and they could not be uncompressed because of this. I have no idea whence they came as they appear from nowhere (compared to my XP). I'm trying now unzip the files separately and exclude the strange s 'file '.

  Thanks for your help though!

• How to highlight a line in IR based on the user name

  Hello
  What is the best way to highlight a line in an IR, based on the user name. IE APP_USER.
  Suppose that if an APP_USER connect to the application, the line corresponding to the APP_USER international registration should only be highlighted.
  (The button change is not visible in IR)

  Hello

  Value of APP_USER is uppercase. Your name column values are lowercase.
  Example of code I have after string comparison is case-sensitive.

  I don't have to change your action Dynamics example JavaScript to convert the value of the cell uppercase

  this.affectedElements.find('table.apexir_WORKSHEET_DATA td[headers="NAME"]').each(function(i){
      var lThis=$(this);
      if(lThis.text().toUpperCase()=="&APP_USER."){
          lThis.parent().children().css({"background-color":"#55A955"});
      }
  });
  

  Now, it should work

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Redirecting to the page based on the domain name

  I have a domain main site it www.tesseract.co.uk with another domain www.tesseractusa.com pointing to it.
  I would like the '.com' to have specific pages we visitors. I'm looking for a way to redirect to a specific page based on the domain name.
  
  Hope you can give some advice.
  
  Thank you
  Richard

  Dave,
  Awesome, works perfectly!

  First post you was right! I've slightly modified your script:

  <%@LANGUAGE="VBSCRIPT"%>
  < %="">< br="">sname = Request.ServerVariables("SERVER_NAME")% < br=""> sname = ucase (sname) < br=""> if InStr (sname, "WWW.TESSERACTUSA.COM") <> 0 THEN< br="" >="">
  End If< br="" >="" %="">

  I really, really appreciate help you.
  Thank you
  Richard

• Can't find the email that I need to get back in the Spam report and not in the junk e-mail folder.

  I regularly get Spam Report emails in Mozilla Thunderbird, but I don't know how to retrieve those that I I want off that e-mail. I checked the spam folder, and they are not in. How do I find/recover these?

  I use a MacBook Pro, OSX 10.9.3 version

  Thank you!

  Thunderbird does not use the term Spam and I do not believe that it delivers any form of Spam report. It can receive one issued by your email provider. I sign in to your account to your web e-mail providers page and check their spam folder to see what is there.

• Cable modem link slow w ISA570 and CLI 'See the tech' equivalent

  Hi, I'm hand non-profit that has a link to 100mbs Mediacom, they get 90 + speed connected directly to the cable modem, but anywhere past the ISA570 they get only 50-60mbs. They spent the cables, added a port separated, tried different PCs, the results are the same, 50-60 MB max. In addition, it is their understanding that the ISA570 cannot do CLI, so how can they get the equivalent of a 'show tech' command in a file to be sent off site for troubleshooting, thank you. Jim

  Hello

  Is there something similar to show tech CEP.

  Log in to the web site GUI, go to device management > Cisco Services & support > Send Diagnostics.  At the bottom of this page is a download button that will collect the configuration file, newspapers and some outputs debugging in a zip file.  You can use this to troubleshoot the device, even though I generally prefer to be the device live webcam himself to see things.

  Before digging too deeply into those however, what type of security services currently have enabled on the ISA?   I was looking on the Datasheet , and even if the SPI is capable of ~ 500mbps, when you start to enable security services these beginning of speeds to drop.

  If we look at the flow measurements UTM (Unified Threat Management), which is roughly of 75mbps, which is pretty close to what you have found.  I go and disable various security services one at a time and test your speed.  My guess would be either A / V or IPS slows down your connection.  It can be one or a combination of these services, causing the slowdown.  You can disable these options, or just explain the extra security will cost a bit of speed.

  Hope that helps a little,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• How can I set the zoom of the screen, so that it does not change everytime I open Firefox. Because I see Web pages in smaller characters, and I want the biggest, without having to re-enter zoom everytime I open Firefox.

  I need to know how to set the zoom tab 'View' option, shere I cannot re zoom everytime I open Firefox. I have a wide screen monitor and generally, when you view Web pages, web content on any page is confined to the center of the page, and I was wondering if there was anyway to set preferences to zoom on a permanent basis without having to change them whenever I open a Web page.

  IE 8 and 9 has a function to set the magnification, and I put mine at 150%, which works perfectly for me. I wonder if Firefox has a similar function.

  There are some add-ons that can be used to change the zoom level on all sites, for example:

  • NoSquint - https://addons.mozilla.org/firefox/addon/nosquint/
  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• Try to update the getting help «site Web has encountered a problem and cannot display the page you are trying to see...» ', what I did wrong?

  Finished the OS reinstall with no NTFS file system prob., installation of drivers, installed antivirus, go to install updates of the system and the message "the website has encountered a problem and cannot display the page you are trying to see.". Improved IE 6 to 8 without problem. still getting the same message. need advice...

  Windows Update no longer works if you do not have windows xp sp3 installed. You can download and install from the link below. First of all, you must return all the way back to IE6 before installing SP3. If you do not, you can not remove IE 8 to a future if you must.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore warnings about the professionals and the network installation. Restart your computer after installation and revisit WU to get the latest critical updates.

• ASO retrieves inconsistent between Excel report and financial in the 9.3.1

  Hi all
  I use basic ASO in the 9.3.1 in the 64-bit Sun Solaris 10 platform.
  
  I found a problem in FR. Please any expert can help with this problem!
  
  I have ASO database with 11 dimensions.
  -Month (time dimension)
  -Year (stored hierarchy)
  -fiscal (stored hierarchy)
  -The script (multiple hierarchy)
  -AmountType (stored hierarchy)
  -FT (stored hierarchy)
  -RC (stored hierarchy)
  -RN (account dimension)
  -WP (multiple hierarchy)
  -Report (dynamic hierarchy)
  -Express in (stored hierarchy)
  
  We have the MDX formula in dimension of report that is placed in the financial status at end of report column.
  However, for some columns/rows, we found that there is no data in the parent level but no data when I developed the dimension of the report. Or, there's data at the level of the child of the dimension of the report but no data to the level parent dimension of report.
  
  When I check cross by Excel. I can extract the data correct at the parent level and child.
  It seems that there is a problem between the financial report and Essbase EN cannot retrieve the data when I develop the column or row in HTML view.
  
  All people find missing data / incompatible data in case of extension of lines/columns in financial report?
  
  Kind regards

  Hello

  Have you had a glance to essbase patch to the latest version (9.3.1.3). I know there have been problems solved with perhaps MDX, it solves the problem that you are experiencing.
  There are also some known problems, it is useful to check the Readme (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/esb_93130_readme.pdf)

  for example MDX. When you use MDX, the Parent function does not have the value relative to all required members. The solution is to set an internal configuration option (2 FormulaOptLevel) to disable the optimization (retroreflective) [6589847 (8-648458764)]

  However, because you see in excel and not in EN question can lay elsewhere, but it is always worth checking.
  Also have you checked EN newspapers to see if errors are generated.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Generate a report based on the opportunity with associated contacts

  Hello experts,
  
  Are we able to build a report of opportunity showing all related contacts? That is to say. report will show how many contacts is attached to a special occasion.
  
  We looked at the analysis of the report, but only 'primary contact' is available for selection, not the "contact."
  
  Thanks in advance, Sab

  Hi Sab!

  While creating a report on the possibilities, you will have only the access on the primary contact. You can have the list of contacts related to the opportunity...

  Kind regards

  Max

• Have not used my email in a long time and I forgot the user name and password

  Hello. I don't use my thunderbird email in a long time and can't remember my user name or password if I remember my email address. How can I connect?

  Your user name is all or part of your e-mail address.
  The user name and the password is given with your email provider. You need to communicate with them.
  Most providers have a password reset link on their page for help by e-mail.

• Limit the number of characters in a text based on the first digit field

  Hello and thank you in advance for your help!

  I want to limit the amount of characters in the text field based on the first digit of the number (the text field is limited to a number format... no decimals, no comma).

  For example, if the number starts with a 3, I would limit the text field to allow only ten characters. I have three scenarios but if I could start with code and what is the best place to add (key combination or validation?) I can take it from there. Thanks again for your help!

  I wrote this code for you that does this. Use it as a typo of the custom field code:

  // Validate that only digits are entered
  if (event.change) {
      event.rc = /^\d+$/.test(event.change);
  }
  
  // Validate string length if it starts with 3
  if (/^3/.test(AFMergeChange(event))) {
      event.rc = AFMergeChange(event).length <= 10;
      if (!event.rc) app.alert("If the number starts with \"3\" it may not be longer than 10 digits.",1); // optional error message
  }
  

  You can duplicate the second part of it for additional terms, but keep in mind that this code won't let you even remove the first character in the field if the result is not valid.

  For example, if you enter "234567890123456" then you can't remove the "2" at the beginning because that would result in a number not valid. You can delete all the other numbers, even if and when it is 10 digits or less, then you can remove the departure "2" as well.

• How do I record an action and save under the new name of file - automatically?

  SO, I want to create a droplet that converts a batch of photos in b & W and records them in a different folder with the suffix "bw".

  Is this possible?

  Thank you

  I use the version 2.3.0 and you can get it from Russel Brown Scripts page Page of Scripts.

  By the way, you are probably trying to use the file > Scripts > Image Processor. Image Processor Pro will be available from the file > Automate menu and tools > Dr. Brown Services > Image Processor Pro in Adobe Bridge. Watch the video tutorial on the page that opens when you click the link above. Video and download link are available under: Adobe Photoshop CS5 panels & Actions/CS6/CC.