web server and plugin development

Similar Questions

• EBS 11i: how to disconnect users who are web server and not yet on forms

  Hi all
  
  I would like to know how we can disconnect users that are web server and server not yet on the forms.
  What we do is the following:
  Adapcctl.sh for the 1-stop web server stop
  2-change AppsLocalLogin.jsp to a static page that say we are in maintenance
  3 - start web server adapcctl.sh start to ensure that users can see maintenance page
  
  The problem is users finding themselves in the web server (first page) but who have not yet open forms pages can still access the app after the point number 3-
  
  Is there a solution for this problem? Do know us what users are on the web server, but not in the forms?
  
  Thanks in advance.

  So in servlet mode, everyone will be disconnected

  Fix.

  What type of customizations will be unavailable? Functional customizations? New tables, simultaneous new programs, new data loaded? The thesis is available even without bouncing apache.

  Since you have posted this question in the forum 'Technology - OA framework', I assumed that we are talking about only jsp pages.

  Thank you
  Hussein

• Android web server and local

  Hello

  First of all, quick summary of my configuration:

  • 6 devices - 3 Android and iOS 3 devices all connecting via wireless
  • LAN with my own Web server and DNS. All Web sites are configured to work outside virtualhost such as mysite.local and can be access in the browser on my desktop and all devices
  • My own local server weinre works again since all devices
  • My own PC with Chrome and and extension edge inspect
  • All devices can connect on board to inspect without any problem and in a position to use synchronized browsing Web sites on the internet

  I just upgraded to the full version of creative cloud and now I can view is more Web sites on my LAN in edge inspect but ONLY on my Android devices. I would absolutely swear that my Android devices to connect but for some reason, they cannot now and I get a message "Web Page not available". In addition, it shows the IP of my desktop (I guess this is how to inspect dashboard works?) as the address that it is unable to connect. On the back of this, I tried to connect to this IP address in the Android browser but nothing happened, and I turned off the firewall on my desktop PC but still no luck. Finally, I tried everything Android devices on their own without the connected devices iOS, but also with all 6 are connected and it's the same thing every time.

  Anyone able to help?

  Thanks in advance,

  Chris

  Hi Chris,

  OK, got it. I'm sure that I know what goes wrong. In iOS, the .local domain names management is automatic, but we had to in Android code in a solution for this particular situation. In iOS, .local refers to the local computer, so when the Android client sees that URL to enter, she replaces part se1united.local of the URL with the IP address of the machine running edge inspect. In most cases, that works, but in your case, it seems that you are in fact trying to refer to a third machine whose IP address must be resolved in dialogue with your own domain name server. The code native iOS that runs properly and is not our code custom Android.

  So there is a problem with our Android app, but I suspect the fix for this will not be easy. In the meantime, there should be some simple solutions, you can choose from your side which must make things work correctly with applications Android and iOS.

  1. In Chrome, try referring to your site with the following URL: http://192.168.1.50/ OR
  2. Rename your server from se1united.local to something that does not include the part ".local" domain name

  I think that is one of those who should work fine.

  Let us know if you have any other questions or problems,

  Mark

• Newbie question: can a LabView script or exe run on a Web server and interact with PHP?

  Hi all

  I am a complete newbie. I had to have an existing LabView project and have been asking if it can work with a PHP Web site. I would like to be able to create a form (for entry) on a Web page, and then go this LabView project entry existing. The existing LabView project then treats the input and generates a text file that the user wants to download from the site.

  So my question is, is it possible? If so, how to configure it and what products/costs might be involved?

  Thanks in advance

  A

  Hi Andy -.

  There are a few limitations "Remote panels" who probably will not do what you are trying to do as possible.  First, the remote panels have only runs on a Server Web of LabVIEW, and this server does not support PHP.  Integrate a web site that uses a web server with more features of LabVIEW is to put the server on a different port and then use an iFrame or something to integrate LabVIEW remote panel page into your own web site.  Communication back will probably have to use another protocol tansportation or to read and write files that they read and write.

  I highly recommend that you look in another function to LabVIEW, called "Web Services".  These are quite a bit different approach of the remote control and are available only on version 8.6 and later (and probably only editions of developers).  Services Web of LabVIEW allows you to perform a LabVIEW program (or modify an existing one) to connect back using XML.  It is a common place to consume and send commands to a Web Service of LabVIEW by using something like PHP or Flash.  However, you are responsible to provide interfacing features in the language that you use that consume the Web Service of LabVIEW.  For example, instead of a graphic on the front, you would need graphical data output and a PHP program that can do something with it.

  Web Services are quite handy if you need a 'light' client, as well as material interaction features of LabVIEW.

• Web server and/or video for DMP4400G

  Hello

  I've implemented DMM running Cisco digital signs to manage DMP4400Gs

  How can I configure the DMM to push web pages to a web server that is local to the DMP

  How can I configure the DMM to the pre-recorded video files stored on a local PC for the DMP

  Thanks for the support EXPECTED

  Well, this will usually be the folder root of your apache server.

  for example, windows search for the /htdocs

  for linux/var/www/html

  However, if you manage a large dmm project then it is advisable to create subfolder under the root folder such as:

  / video

  / images

  So overall, the content will be accessible using the example http:///video.

  Then, you can simply add Vod on the DMM library using the link above and avoid uploading it directly to the DMM

• Configure the web server and application server deployment hangs in 11.1.2.2

  Hi all

  I want to install Hyperion 11.1.2.2 with Oracle 11.2.0.1 database. I installed all the modules successfully.

  At configuration time, I set up the Foundation Hyperion Essbase, planning and reporting with success.

  But the question, when try to configure HFM and FDM EMP Configurator crashes, in HFM Web server configuration and application Web of FDM configure FDM.

  I installed IIS, Oracle 32-bit and 64-bit, the Clients, and also configured DCOM.

  What comments can you do on this point, if any body faced the same question.

  See you soon,.

  Mady

  Hi all

  We reinstalled hyperion again

  then it works fine.

  Kind regards

  Mady

• Flex with separate Web server and app server

  I have a flex app built in Flex Builder. I put the BlazeDS server to point to an internal ip address. When I exported the build, I placed it on an IIS web server that has access to the network where the BlazeDS server is and is also visible externally. I put the file crossdomain.xml to the BlazeDS server to allow access for all (I know that's not sure, but I just want to eliminate this variable). I can make calls to remote objects when I run the flex from the internal network application. However, when you try to make calls to remote objects when you access the app outwardly I get an error that says:

  faultCode = "Client.Error.MessageSend".
  faultDetail = "error Channel.Security.Error Error #2048: security sandbox violation:

  ...

  endpoint = " " http:// " < internal ip address >: < port > / blazeds/messagebroker/amf"

  ...

  I implemented the services - config.xml so that all methods of the AMF are pointing to the internal ip address.

  My crossdomain.xml file is host to BlazeDS (internal IP) in the folder WEB-INF\root. I also put on the Web server? I ran the fire bug and it seems to try to recover the crossdomain.xml file by using the ip address of the internal BlazeDS server which it cannot reach because it is not exposed to the world.

  So in summary, I have Web server through the flex application, and then another machine separated with the BlazeDS application. The BlazeDS application is on an internal IP address and I can't seem to make the remote to her calls when you access the outside flex application.

  Your BlazeDS application should be accessible to the outside (on the internet). Internal IP address would work on your network.

• Is there a way to get the list of hosts and its groups of belonging to the vCenter folder level in 5.5 web vsphere client plugin development?

  Hello

  I need to get the list of all hosts and its groups of belonging to the vcenter folder level.

  1. I created a view giving the extension point: vsphere.core.folder.monitorViews.

  2. After this step, I wrote the constraint as in my class of mediator,

  var ListConstraint:Constraint =

  QuerySpecUtil.createConstraintForRelationship ( _contextObject, 'childEntity');

  I was expecting a list of all child entities such as hosts, dc, cluster... But I have only the immediate child object which is only the Datacenter as my result.

  Is it possible to get all hosts and vCenter folder level Clusters because I need the entire list to vCenter (highest level).

  Other info:
  

  Object file has only two properties:

  1 childEntity - list of entities

  2 childType in-kind folder ('Virtual Machine', 'Data center'...)

  Is it possible to write a constraint specifying which list of childEntities I need using childType in.

  Example: Make Me childEntities that has a 'Host' and 'Cluster' childType but childType in doesn't have these two types.

  In addition, at this level, I could see the 'Associated objects' tab which has all the information I need, such as Clusters and Cluster tab hosts and host tab respectively.

  So, I think its possible to get this list to vCenter folder level.

  I have attached a screenshot representing the need. Kindly ignore the Conventions of naming in there since I edited the example comes with the sdk program.

  
  

  Query:

  1. How can I get the host and Cluster (table of relationship) list to vCenter folder level or even at the level of the vise.global.view?

  2. once I get this list, is it possible for me to manipulate that list and send the new list to IU?

  3. is there another way to do the same thing without the help of model classes and mediator?
  

  
  

  Pointers to this will be very useful.
  

  It is not possible to obtain all hosts a folder specific vCenter from a single query Data Manager.  You need to get the list of centers of data first and then get a list of data center hosts.

  It is best to make these repeated requests to the java level and return only the list that you want to the user interface.

  You can get all the objects in the host of the system with a simple query using a constraint with targetType = 'HostSystem', but you will need to eliminate those from other vCenter servers.  See how this chassis example queries all hosts the Java later in the getHosts() method: samples/chassis-app/chassisRackVSphere-service/src/main/java/com/vmware/samples/chassisRackVSphere/ChassisRackVSphereDataAdapter.java

  Another option is to use the vSphere Web Services SDK to browse vCenter. See the vSphere management forum for help on these APIs.  See this plugin of the sample using this SDK

  samples/vsphereviews/vsphere-wssdk-provider/src/main/java/com/vmware/samples/wssdkprovider/VmDataProviderImpl.java

• Orchestrator and plugin development

  I need orchestrator to talk to a number of third-party systems for which no plugin has been developed yet.  It's all part of a single process of provisioning of Vm.  Should I create a plugin for each system for which no plugin exists, or should I create a plugin "Vm provisioning" giant who can talk to multiple systems?

  It depends; both options have advantages and disadvantages.

  I would go for a plugin by approach because it is more flexible (for example. If a new system appears in the future, you will only need to write a plug-in for it and add it to the photo instead of updating the giant's fits-them-all plug-ins).

  You can also consider using the existing plug-in dynamic Types. Initially, you could make a rapid prototyping with him and later when you become more familiar/feel more comfortable with a 3rd party data API system, to implement a 'good' plugin for it.

• Web server and the apex running on the same machine - possible conflict port 8080

  Hi guys,.
  
  I installed Apache Tomcat and currently in the process of installing Oracle 11 G in the same machine.
  
  The tomcat uses port 8080 and I understand other installs, the APEX uses 8080 as well.
  
  Is there way after installing Oracle 11 G database XE, stop APEX so it is not in conflict with the use of 8080 Tomcat? I have no use for APEX at this point you want to stop if possible.
  
  Alternatively, it can be configured to use a different port?
  
  Thank you very much.

  You can do either, stop it or change the port. So sad that you said that you «have no use for Apex...» ».  :(

  What gateway do you use for Apex? What is the EPG, OSH or the listener of the Apex? If you use the EPG, there is an order any structure/API for it. Here are a couple that you can run a SQLPlus session:

  SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
  
  EXEC DBMS_XDB.SETHTTPPORT(port);
  For example:
  
  EXEC DBMS_XDB.SETHTTPPORT(8080);
  
  OR
  
  EXEC DBMS_XDB.SETHTTPPORT(8181);
  

  If you use OSH then you go to your OHS/Apache Directory and find the path to the OPM and issue commands to start where your stop. If it's the listener of the Apex with Glassfish, then you go to the console of administration of Glassfish and stop your deployment of Apex from there. I'll leave you the specifications.

  Earl

• Is the fix for the problems of WebHelp in RoboHelp versions 10 and 11 work when you access by using a Web server?

  I use RoboHelp 10 with the last fix of WebHelp.

  I copied files in the fix to the folder specified in the instructions, regenerated aid and tested my WebHelp on IE 8-11.

  Seen on the spot, the WebHelp output looks very good.

  Help is accessible by users of a web server, so I set up the output newly generated on our web server and tested the output and that's what I found:

  IE 8: Index and glossary are taking 3 or 4 seconds to load, which I guess I very well.

  IE 9: Index and glossary are taking 3-4 second to load. Index entries are too big and use a different font.

  That is to say 10: when you click a topic in the search pane, you get a blank page. When you click an entry in the Index, you get a blank page. After using the Index/Search and then go back to the content page, you get a blank page.

  That is to say 11: entry of Index are cut

  Has anyone else run these question? I can live with the questions about IE 09/08/11, but on IE 10 blank pages are unacceptable. If the fix is not resolved these problems or I do something wrong? Why the fix would work locally but not when accessed from a web server?

  Any info would be much appreciated.

  Thank you

  Mack

  Interesting. When you say the latest patch, which one is?

  (For an overv of all patches, see

  ( https://www.wvanweelden.eu/articles/robohelp-patches-and-updates)

  In IE10, see script errors? And if you press F12 to open the

  Console developer, it shows the errors/warnings?

  Kind regards

  Willam

• Designjet t520: designjet t520 default login and password for web server

  Hello!

  Which is the default login and password for the web server and how to reset the password?

  Hello
  
  As mention Rashed, there is no password to the factory.
  
  Try a Restore Factory Settings.
  
  If this does not work, go to the Help Menu and do a Soft Reset. (Don't do the hard reset).
  
  For access to the support menu press on and hold the power button for 15 seconds, or at the home screen tap home, back, home, home.
  
  Concerning
  
  Mike

• CF 11 Enterprise install App Server and IIS 8.5 on Web server (different material)

  Hi all.

  Facing a problem of configuration to set up here.  We have the application inside the firewall server and we will have on the DMZ Web server and this web server has to forward the requests to the server see

  I installed cfusion instance HTTP Port 8500 remote Port 8010 host is a local host, with no cluster.  We will have other forums as a result of a port in addition to HTTP and distance on the line.

  So now the question is how to run the connector.  If I run the embedded {cfroot}/cfusion/runtime/bin/wsconfig.exe, it shows localhost as server applications, well, the web server must be IIS, but on another IP address NOT this server, so that the OK button remains grey.

  You would think that you would need to run the connector on the Web server, right?  Well, I do not have CF installed on it, nor do I intend install on my web server, so how do I get on the Web server connector.

  I read a post on taking a wsconfig.jar and pulling the DLL and others, but it is with JRun 8 CF, CF 11 and not IIS 8.5.  Maybe it's the method that I need to follow, but seems to be the new land that has never been displayed in the CF community.  I like to think I'm 'special' but really?  I'm the first to have this set up the configuration, and no one has posted a BLOG about it.  Looks strange OR I'm totally missing something.

  Please let me know any suggestions on how to move forward.

  Running on window server 2012 R2 for CF Application Server and the Web server.  CF 11 E update 3.

  ColdFusion 11 environment distributed for connector with all sites:

  1. install ColdFusion11 on the other server.

  2. Once you install CF11, then copy the jar file "wsconfig.jar" from this location C:\ColdFusion11\cfusion\runtime\lib on the IIS server.

  3. configure IIS in the other server. You need to enable the following features at the IIS level only.

  ISAPI extensions

  ISAPI filters

  CGI

  ASP .NET

  5 ColdFusion11 server to connect to the Web server via the Port connector, which is located in the server.xml file. You can find this file in the C:\ColdFusion11\cfusion\runtime\conf, once you open the file server.xml, this is the port that you want.

  Example: -.

  6. Once you check everything in ColdFusion server, then return to the IIS Web server computer.

  7. the wsconfig.jar file which you copied in this server, rename the .jar to .zip file extension an excerpt it.

  [8. create a file with the same structure here magic C:\ColdFusion11\config\wsconfig\{Magic_Number}--[nombre would be 1, 2, 3... n]

  {9. now go to the extracted folder wsconfig and check this isapi_redirect.dll, copy the DLL to the folder C:\ColdFusion11\config\wsconfig\{Magic_Number}. If you have 32-bit 32-bit copy if you have 64-bit DLL and then copy 64 bit DLL.

  Location of the DLL in the extracted folder

  The 64-bit IIS DLL is located in connector\isapi\intel-win64\prebuilt\amd64\isapi_redirect.dll

  The 32-bit IIS DLL is in connector\isapi\intel-win\prebuilt\isapi_redirect.dll

  10. in the same folder of magic_number create a 'isapi_redirect.properties' file and copy this content. Now, the location and the magic_number might be different.

  extension_uri = /jakarta/isapi_redirect.dll

  Log_file = C:\ColdFusion11\config\wsconfig\1\isapi_redirect.log

  LOG_LEVEL = info

  worker_file = C:\ColdFusion11\config\wsconfig\1\workers.properties

  worker_mount_file = C:\ColdFusion11\config\wsconfig\1\uriworkermap.properties

  iis_buffer_enable = true

  ip_restriction_file = C:\ColdFusion11\config\wsconfig\1\iprestriction.properties

  AUTH_COMPLETE = 1

  11. create another file 'uriworkermap.properties' and copy the content slot

  / cfformgateway / * = cfusion

  / CFFormGateway / * = cfusion

  / flex2gateway / * = cfusion

  /flex2gateway = cfusion

  / cffileservlet / * = cfusion

  / CFFileServlet / * = cfusion

  / cfform-internal / * = cfusion

  / flashservices/gateway / * = cfusion

  / flex-internal / * = cfusion

  rest / / * = cfusion

  /*. CFML / * = cfusion

  /*. MXML = cfusion

  /*. As = cfusion

  *.cfm = cfusion

  /*. Ft3/min = cfusion

  /*. Ft3/min = cfusion

  / * .cfm / * = cfusion

  *.swc = cfusion

  /*. CFML = cfusion

  /*. CFML = cfusion

  /*. CFML = cfusion

  /*. CFC = cfusion

  /*. CFC = cfusion

  /*. CFC = cfusion

  / * .cfc / * = cfusion

  /*. CFR = cfusion

  *.cfswf = cfusion

  /*. SWS = cfusion

  *.jsp = cfusion

  *.hbmxml = cfusion

  12. create another file "workers.properties" and copy this content

  Worker.List = cfusion

  Worker.cfusion.type = ajp13

  Worker.cfusion.Host = localhost

  Worker.cfusion.port = 8014

  Worker.cfusion.max_reuse_connections = 250

  13. now go to a folder that is C:\ColdFusion11\config\wsconfig and copy the "cfwin32.dll". Location

  wsconfig\connectors\installers\intel-win\prebuilt\cfwin32.dll

  wsconfig\connectors\installers\intel-win64\prebuilt\cfwin32.dll

  14 create a file 'wsconfig.properties' and copy the sub content. Number of bits could be changes to 32 bit if you use the 32-bit environment, this file contains site information and the IIS connector. I created this article that you configure the connector with ALL IIS sites, so set below will work.

  1 = IIS, 0, true, "", bitness64 "

  1.SRV = localhost, cfusion

  15. now that we have created all the files and folders. We will add the IP address of the machine ColdFusion11 if IIS can communicate with CF11. There are 2 places to add the IP address.

  a. "workers.properties" file, where is written "localhost" replaced by the IP address and

  b. "wsconfig.properties" where is also said to replace localhost with the IP address of the machine ColdFusion11.

  16. now we must work on IIS services manager, then start the IIS Manager. We will make any changes to the IIS server and when we restart IIS, it inherits all the mappings Manager and filter ISAPI in all sites.

  17. click on the server and then click handler mapping. Add a script mapping and Add .cfm, .cfc, .cfml, .cfr, and .cfswf managers and then point it to this DLL. C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll.

  Click request restrictions, select Invoke and select the files and folders, and Ok. In the right pane, click Edit feature authorization select run.

  Example: Ask the path:-*.cfm

  Executable:-C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll

  Name:-cfmHandler

  NOTE: Add these Manager you will use not all add them.

  18. click on IIS server and select default Document and add index.cfm as default document.

  19. click on IIS server and select ISAPI and CGI Restriction, select Add and 'ISAPI and CGI path' 'C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll', Description "tomcat_All". Check Allow extension path to run and press Ok.

  Click on change the function parameter in the right panel and check both boxes.

  20. click on IIS server and select the ISAPI filters and add a filter name 'tomcat' and the executable file "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll".

  21 now, add you a virtual directory to each site else it won't work. To add a directory virtual right click on your Web site and add a virtual directory. Alias name "jakarta" and the physical path "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll" press Ok.

  Follow this step with the same Alias and path even to all Web sites.

  22 restart the IIS service, and run any ColdFusion page. It will work.

• the difference between the Web application server and Web server?

  What is the functional difference and the relationship between the Server Web applications and Web server, for example: Weblogic is the Application Web server, IIS is the Web server, Apache is the Web server and Oracle Application Server is the Application Web server? Someone said, Web Application Server is a Web server, but more functional superset, seems in this case, we can also use a server of web applications as a web server. For example, we can use Weblogic, but do not use IIS and Apache, please correct me?
  
  Published by: user2571802 on February 28, 2010 18:51

  Hello

  Have a read of http://www.javaworld.com/javaqa/2002-08/01-qa-0823-appvswebserver.html if all goes well it should give you a little more understanding.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

  Published by: JohnGoodwin on March 1, 2010 08:17

• Image taken from server and display on the screen

  Hello Sir

  I'm new to the development of Blackberry, I use a webservie that returns the image in . Its a Web service written in DotNet Framework. I'm trying to convert bytes it so that I can conver bitmap and use it on the screen.

  I think I'm losing a date when the dat of conversion to Byte]

  connection_for_image image_connection = new connection_for_image();

  raw Byte [] = image_connection.get (URL);
  Dialog.Alert ("control returned 1 size =" + raw.length);
             
  try {}
                    
  Bitmap_image bitmap = new Bitmap (Bitmap.ROWWISE_MONOCHROME, 50, 50, gross);
                      
  Image BitmapField = new BitmapField (bitmap_image);
  Add (image);
                   
  } catch (Exception e) {}
  Dialog.Alert ("catch" + e.getMessage ());
  }

  After running the above code a few image is displayed in black and white, but even once, is not the image I am downloading from webservice.

  In the connection class that I'm parsing the data type in bytes using following code

  data Byte [] = null;

  I have String = d.MySplitName (content, "",")<>
  data = i.getBytes ();
  return data;

  Here, I'm a little frustrated because you don't seem to listen to what I tell you.

  "How to convert byte [] Base64Binary data.

  "Is there a way by which I can convert the base64Binary byte data.

  Please read carefully what I suggested that you make.  You should be able to determine the raw bytes that has your Web server.  The Web Service then converts it to text he sends you.  You should be able to convert it to bytes that were originally used.  You have enough information in this thread already do.  Please confirm this part of the treatment before you do anything else.

  "then use these data to display the byte [] in the bitmap file.

  That's where I think your problem is.  Look at the code I gave you in the last post.  But you will need to know the format of the raw bytes that are stored on your Web server and sent to you.  Then find a way to convert them into a Bitmap image on the device - method may depend on how the bytes are stored on your Web server.  It might be that the bytes that are sent to you are already in a Blackberry bitmap format, but I doubt it.

  So please make sure that you have correctly found the bytes of the raw image.  When this is correct, you know that your network stuff working.  Once you've done that, then you have to find a way to convert the bytes of the Bitmap image.

  If the byte [] is supported by JSR 172 is not relevant at this stage.