Web server and the apex running on the same machine - possible conflict port 8080
Hi guys,.I installed Apache Tomcat and currently in the process of installing Oracle 11 G in the same machine.
The tomcat uses port 8080 and I understand other installs, the APEX uses 8080 as well.
Is there way after installing Oracle 11 G database XE, stop APEX so it is not in conflict with the use of 8080 Tomcat? I have no use for APEX at this point you want to stop if possible.
Alternatively, it can be configured to use a different port?
Thank you very much.
You can do either, stop it or change the port. So sad that you said that you «have no use for Apex...» ». :(
What gateway do you use for Apex? What is the EPG, OSH or the listener of the Apex? If you use the EPG, there is an order any structure/API for it. Here are a couple that you can run a SQLPlus session:
SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
EXEC DBMS_XDB.SETHTTPPORT(port);
For example:
EXEC DBMS_XDB.SETHTTPPORT(8080);
OR
EXEC DBMS_XDB.SETHTTPPORT(8181);
If you use OSH then you go to your OHS/Apache Directory and find the path to the OPM and issue commands to start where your stop. If it's the listener of the Apex with Glassfish, then you go to the console of administration of Glassfish and stop your deployment of Apex from there. I'll leave you the specifications.
Earl
Tags: Database
Similar Questions
-
possible to install the client tools OBIEE and OBIEE server in the same machine
Hello
possible to install the client tools OBIEE and OBIEE server in the same machine.
Ex:
Last week I've updated Patch BP1 in my local system, in the process, we got the update also oracle Client tool
But in my Administration tool in the built-in tool automatically updated, we need to install the client tool in my system?
My doubt:
Please check this screenshot
http://ScrnSht.com/sskbjb
Please help me,
Thank youYou should not install client tools because they will be automatically installed w install the server. The 11g installation guide says "do not install client tools on the same computers that host your server instances Oracle Business Intelligence, client tools are already installed on these computers (as part of the installation of Oracle Business Intelligence)."
so useful, mark it as good or useful.
-
Customer of the proceeding within PPP and Oracle server in the same Machine?
Hello export.
If we install the application and the server of Oracle database in a single machine, must we always install the client from the Oracle instance?
Thank you and best regards,
Tong Ning
I would use two accounts of the operating system where the application administrator and database administrator are held by different people with different responsibilities.
It is not critical to maintain client inventory with the server.
Hemant K Collette
-
second Web server on the DMZ not visible outside
With the help of a PIX 515e
I have several Web servers in the DMZ, the first web server and the mail server are set up with the port mapping for the PIX outside IP address of the interface.
The second and third (inside interface) of the Web servers are configured with static mappings and access lists.
I can see the first n the mail very good server webserver, but I can not see servers in second or third.
What have I done wrong?
I suggest you analysze traffic with the command to 'capture' PIX and sniff traffic on the DMZ and outside traffic.
Check if packets arrive to the external interface, if it reaches the web server and is at - it a response.
example of
IP access-list 120 allow any HOST 207.236.60.35
capture the access-list 120 vpncap OUTSIDE interface
See the access-list 120 retail vpncap capture
or
https://PIX-IP-address/capture/vpncap [/pcap]
To remove the capture:
No vpncap capture
sincerely
Patrick
-
replication of cache stanby group active on the same machine
Hello
To validate a design of replication, I'm putting in place a pair of active standby of a cache on a group my portable linux (ubuntu). I have installed two data warehouses on the same instance of TT - cgdsn and master2
I created a group of active usermanaged on DS TT cache and began an active standby replication using the following sql:
command > create the pair of Eve active cgdsn on "simulation-t61', master2 on"simulation-t61' acknowledgement STORE cgdsn PORT 21000 TIMEOUT 30 STORE master2 PORT 20000 TIMEOUT 30;
I read in a thread earlier that replication on the same machine will require ports to be expressly provided for in the replication command.
Here the result to check the status of the main data store:
< output >
Oracle@SIMU-T61: ~ $ ttrepadmin showstatus - cgdsn_tt70
Enter the password for "ora":
State of replication Agent as: 2010-03-14 20:22:43
DSN: cgDSN_tt70
Process ID: 18496 (started)
Strategy of replication agent: manual
Host: Simulation-T61
RepListener Port: 21000
Last LSN write time: 0.19340024
Last LSN forced to disk: 0.19340024
Replication hold LSN: 0.19320752
Peers in replication:
Name: MASTER2
Host: Simulation-T61
Port: 0 (not connected)
Replication status: STARTED
Communication protocol: 24
ISSUER or the threads:
For: MASTER2
Start/number: 1
Send LSN: 0.19320752
Sent transactions: 0
Total packets sent: 0
Check packets sent: 0
The packets received total: 0
< / output >
I then tried to reproduce the day before but got following error
< output >
Oracle@SIMU-T61: ~ $ ttRepAdmin-duplicate - of cgdsn_tt70 - host "simulation-t61" - keepCG - cacheUid ora - cachePwd ora - localhost "simulation-t61" - verbosity 2 "dsn = master2_tt70; UID =; PWD ="
Password for "ora":
* 20:27:02 how to contact remote main demon to the 127.0.1.1 port 17000 *.
* 20:27:02 double operation ends *.
TT12039: Could not get port number of TimesTen replication agent on the remote host. The replication agent has not been started or it has just started and has not communicated his port number on the demon TimesTen
< / output >
Log file
< output >
00:30:33.20 Info: 8143: had pid 20405 Hello, type utility (/ usr/lib/oracle/xe/TimesTen/tt70/bin/ttRepAdminCmd - duplicate - of cgdsn_tt70 - host simulation-t61 - keepCG - cacheUid ora - cachePwd ora - localhost simulation-t61-verbosity 2 dsn = master2_tt70;) UID =; PWD =)
00:30:33.20 Info: 8143: accepts the incoming message from 127.0.1.1 with remote Protocol (we're TimesTen 7.0.5.0.0.tt70, they are 7.0.5.0.0.tt70 TimesTen remote)
00:30:33.20 Info: 8143: 20405 -: utility program registration
00:30:33.20 Info: 8143: labour: with request #1336.4606
00:30:33.20 Info: 8143: labour 1336: socket closed, call for recovery (last cmd was 4607)
00:30:33.20 Info: 8143: from daRecovery to 20405
00:30:33.20 Info: 8143: finished daRecovery for pid 20405.
00:30:33.20 Info: 8143: labour got 20405, not in the restaurant #1335.4608: path = / tmp/master2
* 00:30:33.20 Err: 8143: TT14000: internal error of TimesTen daemon: Got notInRestore command with data store unknowns "/ tmp/master2."
00:30:33.20 Info: 8143: labour: with request #1335.4608
00:30:33.20 Info: 8143: labour 1335: socket closed, call for recovery (last cmd was 4608)
00:30:33.20 Info: 8143: from daRecovery to 20405
00:30:33.20 Info: 8143: 20405 -: process is released
00:30:33.20 Info: 8143: finished daRecovery for pid 20405.
00:30:34.14 Info: REP: 20246: CGDSN:transmitter.c (1358): TT16114: connect to the MASTER2 on Simulation-T61 (127.0.1.1); Port: 20000
00:30:35.14 Info: REP: 20246: CGDSN:transmitter.c (1358): TT16114: connect to the MASTER2 on Simulation-T61 (127.0.1.1); Port: 20000
00:30:36.14 Info: REP: 20246: CGDSN:transmitter.c (1358): TT16114: connect to the MASTER2 on Simulation-T61 (127.0.1.1); Port: 20000
0
< / output >
Output of netstat
< output >
Oracle@SIMU-T61: ~ $ netstat - a | grep 21000
TCP 0 0 *: 21000 *: * LISTEN
< / output >
I am supposed to provide the port number of my Active ds in order somehow duplicate?
Thank you
REDA
Published by: user8936481 on March 14, 2010 21:41What is the DSN definition for cgdsn_tt70?
It could be a problem with the - from clause in the - duplicate order. Assuming that your dsn definition is defined with the attribute of DATA store to be similar to the following:
[mydsn]
Data store = / tmp/storedsAnd your ttRepAdmin-double command is similar to the following:
ttRepAdmin-double - mydsn...
You need the value of the parameter for - the option to reflect the prefix of the file name of the data store. The ttRepAdmin command above should be:
ttRepAdmin-double - storeds
That is to say - of mydsn
becomes
-of storeds
-
All,
I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
ServerA (existing web server) to connect successfully to the server b (existing database server).
ServerC (new web server) to be connected on server b.
Directory copied apex and images ServerC ServerA
TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
)
(CONNECT_DATA =
(SID = ORCL)
(SERVER = DEDICATED)
)
)
Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
AddType text/xml xbl
AddType text/x-component htc
< /plex location >
Order deny, allow
Docs PlsqlDocumentPath
AllowOverride None
PlsqlErrorStyle DebugStyle
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
Apex PlsqlDefaultPage
PlsqlDatabasePassword correct_password
Allow all the
< / location >
Restart HTTP_SERVER on ServerC.
I get the error:
Journal of the database failed
TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
I thought it was weird since it's what worked on the other server and using sqlplus.
I also tried to change the dads.conf file to use the following connection string:
PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
Any ideas?
Thank you
KeithKeith:
Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.
CITY
-
Cannot start web server on the executable file
Hello
We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.
As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.
I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.
When executing:
- The code will sit in the while loop until I press stop.
- Web server: Active Server = FALSE
- Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">50ms>
It's the ini file to the executable file:
[WebTest]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
server.tcp.serviceName = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.Enabled = True
WebServer.TcpAccess = "' + * '"
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAnd it is the Web server configuration file:
ErrorLog "$LVSERVER_ROOT/logs/error.log".
LogLevel 3
The default server name
DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
Listen 8000
ThreadLimit 10
TypesConfig "$LVSERVER_ROOT/mime.types»
DirectoryIndex index.html
LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule dir libdirModule
LoadModule copy libcopyModuleAddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandlerAddHandler dirHandler
AddHandler copyHandler"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
KeepAlive on
KeepAliveTimeout 60
Timeout 60As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?
I tried the things:
- Copy a new default configuration file before the entry into force
- Writing a predefined file (encoded) before initializing config
- Definition to root before initializing directory (it actually generates an error because the server is not active...)
- Set WebServer.Active = TRUE several times inside the while loop
- Toggle the web server in the ini file
System:
- LabVIEW 2010
- PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!
Ben
Hi Marco, thanks for the reply.
I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!
If anyone is interested, here's the problem:
The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!
This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.
AND
You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.
The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup
-
Copying files from a web server to the VMFS data store
Hi everyone I have a little trouble working it.
I say a file on a Web server http://webserver/important.txt and I want to copy this file in a local data store. I am able to copy the file from the Web server to the server I'm running PowerCLI, and then to the data store, but I can't work on how to copy directly.
Any ideas?
As far as I know, the Copy-DatastoreItem cannot handle this. The cmdlet requires a path to the Item parameter.
You will need to first create a local file and then copy in the data store.
-
I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
Any ideas?
On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:> I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.>>>>>>> Any ideasStart reading hereYou will not be able to use your existing tuners like tuner network. Microsoft hasarrested development of Media Center, so don't expect any new hardware/software toappear.__________________________________________________________________________________________________BarbMVP Windows Entertainment and connected homeMy Blog - http://digitalmediaphile.com/Please mark as answer if that answers your question -
PIX with H &; S VPN DMZ hosting web server to the hub
Ok
Heres a problem which I think would be quite common for these even remotely conscious of security. Unfortunately, my knowledge of the PIX (as well as other Cisco devices) is still in phase of 'growth '.
So, here's the problem. I have a WAN put in place with PIXen and SonicWalls, we are set up in a design essentially Hub and Spoke (fine ok so it is partially meshed). We recently decided to pull the trigger on getting a 'real' web site and everything went relatively well that getting up and rolling. (even with my notice of 3 days/deadline), but here's the problem: I set up the web server on the DMZ to the hub pix, and I figured out (the easy part) how to set things so in the Home Office, people can connect to the web server by using the internal address, but I don't know what to do for people in remote offices with VPN home connections. I tried to define static routes, I tried to add the DMZ to the VPN trigger, I tried to do both of the last things together, and I checked that I have rules allowing traffic to the VPN outside the DMZ on the inside. So, what else can I I get?
I have no problem by configuring a PIX for all basic ups and VPN even at this stage, I can do most of it through the CLI (even if I still want to do more through the PDM). My biggest stumbling block on the PIX has so far was when I actually involve this pesky DMZ...
I actually two PIX in my office, two for my network domestic (one for my place in the States and one for my place in the Japan), so if you can help me, I'll be the two problems and do not forget to give a rating of excellent reviews!
so I guess that leaves me to the place where I scream...
Help!
and I humbly await your comments.
the current pix configuration should look at sth like this,
IP access-list 101 permit
IP access-list 110 permit
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac superset
myvpn 10 ipsec-isakmp crypto map
correspondence address card crypto myvpn 10 110
card crypto myvpn 10 set by peer
superset of myvpn 10 transform-set card crypto
interface myvpn card crypto outside
ISAKMP allows outside
ISAKMP key
address netmask 255.255.255.255
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
now, to add dmz on top of the existing vpn, add the following to the pix (and apply the same concept on the remote end device)
access-list 102 permit ip
access-list 110 permit ip
nat (dmz) 0 access-list 102
-
DMZ web server->; inside the database server
Suppose that a network topology looks like this:
A PIX with 3 interfaces:
interface (private public static IP 10.10.10.1) interface (public static IP of 69.110.38.35) interface (static IP private address of the 30.30.30.1) --------------------------------------------
The internal network has a {server} with the IP address of 10.10.10.2.
The DMZ has a {web server} with the IP address of 30.30.30.2.
I will welcome external guests (outside) access to the web server (30.30.30.2) via port 80.
This web server access turn the database server (10.10.10.2).
Assume that all other commands are issued. Then, I'll create an access list that allows server WWW DMZ to communicate with inside the database server.
access-list dmz-to-inside permit tcp host 30.30.30.2 host 10.10.10.2 eq 1521
Should I publish the following, too:
(1) access-list dmz permit tcp host 30.30.30.2 no matter what 80 eq
(2) access-group in interface dmz dmz
(3) static (inside the dmz) 10.10.10.0 10.10.10.0 netmask 255.255.255.0
xlate clear 4)
If so, what each of them do?
Thank you for helping.
Scott
1. Yes, the static statement "10.10.10.0 static (inside, dmz) 10.10.10.0 netmask 255.255.255.0" will disable NAT. Although it is not necessary to disable nat, however, it saves money and simple to manage. the reason for this is the traffic between the dmz and inside is private, there is therefore not necessary to apply the public ip address.
2 pix receives the package intended to 30.30.30.2 10.10.10.2. PIX examines the static statement and based on the static above statement, pix will not nat package (i.e. pix will leave the soruce address be) and send it to 30.30.30.2 via the interface of the demilitarized zone.
for example
original package - source 10.10.10.2, destination 30.30.30.2
After pix - source 10.10.10.2, destination 30.30.30.2
3. the "Clear xlate" command must be issued whenever the nat/global or static has been added/deleted/modified. This command is to force the pix to clear the existing ip translation.
for example, before you add the command "static 1.1.1.1 (indoor, outdoor) 192.168.1.100 netmask 255.255.255.255", the pix may already have an ip 192.168.1.100 translation (it might come from the nat/global). now, after you apply the static command, the pix will keep the existing translation for a certain period time. 'clear xlate' is needed to erase the old translation and so to activate the new static statement.
-
LOB compression secure between the server and the client
Hi all
According to the doc:
I don't know about the server and the client model in compression. This means that when has a table with a column of compress instance A and instance B accesses the table, the compression is performed on the server? How to do an instance a server or client, in this context? What he means by "random access"? How can we ensure that if a server is running live?SecureFiles LOB compression is performed on the server and enables random reads and writes to LOB data. Compression utilities on the client, like utl_compress, cannot provide random access.
Best regards
TA.How do with random reading and writing? What is random and write anyway?
LOB manipulation - see DBMS_LOB. e.g. DBMS_LOB. WRITING, WRITEAPPEND, READING, etc
You couldn't use these on something that has been compressed to the outside.
-
I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download. Is it because iWeb can only support a limited number of links, hypertext, or any other reason?
It has been much discussed.
See my solution in this post:
-
What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?
3. when exactly you get this error message?
The following threads may be useful:
http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn
-
How can I retrieve the name of the server and the database to a system dsn
Hello
I am trying to create a database that will be used by many stores. Each store has its own server and the database and the access runtime version. I want to create a system dsn name, but allowing the administrator to modify the server and the database for that dsn and then, when you connect to the database, the database must be able to find this DSN and the 'new' name of the server and name of 'new' database and connect to point to this server and the database tables. I don't have a login form and I can get the name of the dsn, but I can't find a way to get the server name and database name for that dsn. Does anyone know a way to retrieve this from the registry. I can see it using regedit but have no idea on how to get this in vba access.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)*
Maybe you are looking for
-
System hangs after installing UPDATE for Windows XP (KB955759)
Update for Windows XP (KB955759) installed on my system without problems. Once the system reboots and the Office rises, the system hangs. Are there any known issues or fixes for this? The system is XP Pro SP3 Thank you!
-
Installed the sp3 (XP Home) STOP 0xC000021A
As indicated, I installed sp3 on an old Dell laptop (XP Home). Normal startup now receive, STOP 0xC000021A. I am able to boot in safe mode with networking and connect to internet with ethernet and reports sp3 is installed. I would try to reinstall
-
I've had recently have my drive hard iMac replaced. After performing a full restore of the Time Machine backup system, I found that HP Scan does not at all, despite the printer itself its other tasks normally. This means that ABBYY Fine Reader also d
-
VirtualKeyboard.setVisibility () on storm Simulator
Anyone else working on the simulator of storm having similar problem? -virtual keyboard gets instantiated (for example, when the user clicks a text field) -user leaves the screen, but the virtual keyboard rest, even if the old screen called setVisibi
-
How can I reinstall Lightroom 5 and Dreamweaver CS4
I need to reinstall Lightroom 5 and Dreamweaver CS4, but have lost my disc where can I download the files? The software is saved with Adobe and I have the keys.