Web site works not properly in the browser in app

Similar Questions

• Web site works not properly

  Hi all
  
  I am new to the present extermely and I have a problem with my Web site. I downloaded it on the server as indicated by my hosting company and I get a "Index of /" when I type the web address. If you click on the "public_html" it redirects you to a page and or must reselect "public_html", then select "index". After that, you can select the ' home, job or contact us "pages. the lings and pages are working fine, I need help so as to why th home page doesn't show up when you type the web address. the web address for my company's website is www.bluefabrication.com
  
  Thanks in advance
  
  

  > I get an "Index of /" when I type the web address

  This means that the host has the exploration of directory enabled for your domain.
  It's a very bad practice - you should immediately ask to turn off
  which.

  > If you click on the 'public_html' it
  > redirects to a page and or must reselect "public_html".

  This probably means that your site DW definition is incorrect. Your FTP
  the host field should be 'www.bluefabrication.com' and your host directory field
  should be 'public_html '. Is that what this is?

  In addition, your HOME page is named "home.html". You should ask your host
  what the DEFAULT file for this server name (I can assure you that it is not
  "home.html"). It is probably "index.html" - confirm with them. That
  would be the reason why your HOME page does not load by default.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "bluefabinc" wrote in message
  News:g81efm$D5H$1@forums. Macromedia.com...
  > Hello all,.
  >
  > I am extermely new to this and I have a problem with my Web site. I have
  > He uploaded to the server following the instructions from my Web host and I get a
  > "Index."
  "> of / ' when I type the web address. If you click on the 'public_html' it
  > redirects to a page and or must reselect "public_html", then
  > select "index". After that, you can select 'home, job or contact.
  "> Us."
  > pages. the lings and pages are working fine, I need help so what about
  > Why
  > e homepage does when you type the web address. the web
  > for my company's website address is www.bluefabrication.com
  >
  > Thanks in advance
  >
  >
  >

• Web sites is not load in my browser, uninstalled completely deleted all the files the files program forms and new installation is already done, matter is not resolved

  When I try to load the chat sites online they load in my browser. tried on different sites, but none of them loaded. www.migchat.com , I already have the complete installation of the United Nations and a fresh instalation but the prblm is always the same.

  It loads OK for me. Have you tried another browser?

  This may not be of immediate help, but your update of PriceMeterLiveUpdate indicated in the details of your system is not well regarded. Do you have any use for it?

  Suggest you Google for information and advice.

• A test of web sites to make sure that the browser/Flash player / other is sufficient for all the Captivate content

  My previous object in the header was a little confused, so I hope it's good I start again and more clearly what I need.

  I have hundreds of users who access the Adobe Captivate 5.5 training.  Many users have no problems to display the content.  SOME users have bad, specially when you view a video included in the training.  It will just play for them.  These users have different browsers, so it would seem that the browser type is not a problem.

  What I hope is...

  a website that allows users to know that they all needed to run any content in a session of Captivate.  For example, as you know, Adobe has a web site to inform the user what version of Flash Player, they have (if any).  I would be great to have a site that would let the user know whether they meet the minimum requirements (not simply Flash Player) to successfully participate in training.

  Is anyone aware of such a site?  Or have any ideas on how to build one?

  Thank you and I'm sorry for not being clearer on the previous post.

  Best regards

  Mark

  Captivate outputs (in general) as Flash. So as long as users have a recent version of the Flash Player, they should be technically able to read the content.

  However, of course, online delivery depends on the internet connection of the user. What happens if you are their video feed and their connection is slow?

  For similar concerns, point us our users on speedtest.net and ask them to publish their results. It sometimes helps illustrate their slow connection means a slow video streaming.

  And, of course, the older computer, complexion less it is going to be making the course. My older computer, with the frustration of my 5 y/old, plays horribly - Flash sites and occasionally and it's a computer clocked at 1.6 ghz with 512 MB of RAM and XP... with the latest browsers and Flash player. You can always ask their specifications of the computer, but it is not an easy thing to determine through software/website.

  So you can create a simple 'minimum requirements' page that you can point to... but that doesn't make a diagnosis... Well, apart from the simple version of Flash player/detection (which is pretty simple), it is a complex task.

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Web site works not-selection drop-down list box does not correctly

  Http://mobile.free.fr/moncompte -commerce site
  A drop-down list box shows that the user can choice phone numbers.
  The result is always a warning message 'phoe number still used '.
  FireFox version: 29.0.1
  plugin: WOT, ADBLOCK +.
  Best regards

  Many issues of the site can be caused by corrupted cookies or cache.

  • Clear the Cache

  Press < Alt > or < F10 > to display the toolbar. Then;
  Tools > Options > advanced > network > content caching Web: clear now

  and

  • Delete Cookies

  Press < Alt > or < F10 > to display the toolbar. Then Tools > Options > privacy.

  Under historical, select Firefox will use the custom settings.
  There is a button on the right side, called View the Cookies.

  If there is still a problem,
  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press the < Alt > or < F10 > key to bring up the toolbar... Then
  Tools > Options > advanced > general.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• Site displays do not properly on the browser web pc

  A site I designed on a mac www.froglodge.co.nz Muse works and shows fine on my mac but don't display correctly on a pc. Any ideas on why?

  I tried to view the site in Mac and PC, but I don't see the difference. Please post screenshot of the difference that you see on your end.

  Also specify the name of the page or we give a link to the page that contains the content that differ on PC and Mac.

  Thank you

  Sanjit

• Equium A110-354: Subwoofer not working not properly on the 2.1 speaker system

  I just bought a set of 2.1 speakers (with 1 single output jack - green lemon) and plugged into the headphone jack. It works normally, ONLY the subwoofer is not. I tried to use the loudspeaker on my mp3 player and the subwoofer low works perfectly.

  Why my subwoofer does not work properly when connected to my laptop? Because of the sound card on laptop? Someone please help. Thank you very much.

  Hello

  Try this:
  -Go to the control panel and choose sound and audio devices
  -under the Volume tab, choose advanced options in the speaker settings
  -Properties advanced audio should be opened. There you can select the right speaker system.

  PS: The Toshiba virtual sound program must be installed on this laptop. You should really check out this program. Here, you can select the mode and the listening environment.

• (Redirected) REFERENCE DELL TOUCHPAD NOT WORKING NOT PROPERLY WHEN THE CHARGER IS CONNECTED

  When I plugged my inspiron Dell5050 the touchpad is not working properly. After removing the charger, the touchpad works properly. I restore my system, open in safe mode, digonsis the system, but it has not helped me.

  Hi dkydell.

  Go to your profile and change your user name. We are not allowed to use Dell as our username.

  Please repost this in the laptop computer forum for interventions.

  http://en.community.Dell.com/support-forums/laptop/

• Satellite A50 - 109 fan works not properly after the HD upgrade

  Yesterday, I upgraded the HD of my laptop A50-109 of 3 months. The original HD installed in the laptop was (to my surprise) a Fujitsu HD 40 GB 4200 RPM 2 MB cache.

  So I've upgraded to a Toshiba 80 GB 5400 RPM 16 MB of cache and had to re - install Windows XP Pro and all the drivers of toshiba.

  Now, since the upgrade, the fan is constantly working even when CPU power, cooling method and all the others are on the lowest setting possible. Before the upgrade, the fan would obey the parameter of cooling method and the fan would be COMPLETELY silent, IE does not work because there was minimal use of the CPU, etc.

  Now the situation has changed, and the fan runs constantly no matter what use. I am terribly disturbed by noises, and I see no reason for the change.

  Is there a solution or should I return the HD or laptop?

  Hi Simon,.

  A very interesting discovery.

  Kind regards

• Why is his HRT and card spinning works not properly on the Collection of Microsoft Solitaire?

  Especially on TriPeaks and pyramid sound does not work for higher levels of score and card stop turning in midair.

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, the sound does not work while playing Microsoft Solitaire.

  1 did you changes to the computer before the show?

  2. the sound works well in the computer apart from the question of sound game?

  3. what operating system you have installed in the computer?

  Please follow the methods to check her solves the problem:

  Method 1: Scan SFC Run in the computer

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 2: Turn on your computer in a clean boot state in order to identify the cause

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support

• HTTPS Web site does not load all the content.

  Hello
  I have a https site that don't load all of its content, even after I admitted that all of the content could be loaded.
  Despite this, the content of the site remains the same.

  I installed Firefox today, so it is impossible that the components of changed evironment.
  I published cookies, buffers, etc. several times history
  How can I solve this annoing problem?

  Burst

  Thanks for reporting on your results.

• Firefox downloads Web site, but not properly

  It downloads the page but the page window is too small, so you can't interact with it.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  See the font size and zoom - increase the size of web pages and the font size and zoom - increase the size of web pages and http://kb.mozillazine.org/Zoom_text_of_web_pages

• touchpad not working not properly and the volume control is not displayed

  I have a HP Pavilion g6, and just recently, I noticed my 2 finger scroll stopped working. In order to use it, I have to go and open the "Synaptics Touchpad" whenever I start. Once I open and close my scroll is working again. Is it possible to keep on? Also, when I adjust the volume, no display on the middle of the screen there is more to show how high or low I'm adjusting! These things just stopped working it a month ago and I have no idea why!

  Hello

  About the touchpad, start by downloading the latest installer Synaptics driver on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59727.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows has reloaded, you may now need to configure the options require you for the touchpad - open windows control panel, open the mouse, select the tab settings of the ClickPad, then click the button settings ClickPad.

  With regard to the on-screen display, download and reinstall the following.

  HP utility screen.

  Kind regards

  DP - K

• Mask works not properly on the model of clipping.

  Previously, I've recreated a model; several triangles in black. I used a clipping mask to change its color to gradient. It worked very well and no problems. Although recently recreated this model (double size) and then tried a clipping mask. It is no longer cut out the shape and it would be just the gradient is showing. Any ideas?

  Or maybe an additional period of saving method to change the colors on the behaviors.

  Many thanks in advance,

  Steven

  I can't tell from your screenshots if your model is black and white or black and transparent, but in testing I've done, the process worked correctly when the boss has a transparent background and didn't when the background is white: