Webcam built in computer but wont detect it

Similar Questions

• I built a computer by using the hard drive of my laptop which has windows 7 Home premium on it and I get messages to activate windows

  Recently, I built a computer, but I get messages from windows activation; I used the hard drive of my laptop which had windows 7 Home premium top and I never had any problems with it. Can anyone help?

  Original title: validation of Windows

  >to be filled by O.E.M. power O.E.M. American Megatrends Inc.. 1101

  Based on your report, you seemed to have changed the motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  You can try the phone activation, there is no guarantee:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Service pack 3 on my computer but the webcam I bought required service pack 2

  I have service pack 3 on my computer, but the webcam I bought required service pack 2.  What can I uninstall 3 and make 2?

  * original title - I have service pack 3 but need service pack 2 for the webcam

  Yes, you can do it.

  but there might be a chance that if you last updated your system to sp3, the driver would not work.

  That being said, go to the website of the webcam and review their installation instructions because they have updated their software or hardware cam driver for the component that you have purchased.

  either way, it seems that the cam was made during the time when xp sp2 was on the market.

• I built in webcam on my laptop but I don't know how to get to the top to see?

  original title: built in Webcam

  I built in webcam on my laptop but I don't know how to get to the top to see?

  What should I go for?

  First of all, your system must have appropriate drivers for your webcam and then you need an application to use it.

  You could get the app and drivers both with your PC you can use these, otherwise go the manufacturer's Web site and find what is appropriate for your system.

  You can try Windows Update for drivers too.

• DVD/CD driver is detected by computer but when any disk is put in it does not read.

  LightScribe DVD Supermulti drive / CD - Writeris found by computer, but can not read any kind of dick that is inserted. How can I fix this. or do I need a new driver?

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My Pixma MP495 will print and copy, but wont scan. Says it cannot detect a scanner. I'm missing something.

  My Pixma MP495 will print and copy, but wont scan.  Just says that it cannot detect scanner...

  Hello

  Make sure that the Acquisition of Image Windows service is started.

  a: type Services.msc in the start search box and click on enter.

  b: now, look for a service called Windows Image Acquisition

  c: Double-click the service and make sure that it is detected and set as Started.

  d: click apply , then ok.

  Good day!

• I have new iphone but my computer does not detect this why?

  I have new iphone but my computer does not detect this why?

  iPhone 5 requires iTunes 10.7. You have upgraded to this version?

  https://discussions.Apple.com/article/TS1538

  http://support.Apple.com/kb/DL1576

• Transfer photos from the camera to the computer, but the camera is not detected on the computer

  Original title: want to help with the camera to the computer?
  I want to d/l my pictures from the camera to the computer but the computer does not recognize camera?

  Hello

  1. don't you make changes on the computer before the show?
  2. what happens when you connect the device to the computer?
  3. you receive an error message?
  4. What is the brand and model of the camera?
  5. How do you connect the camera to the computer?
  6. What is the status of the camera in Device Manager when you connect?
  7. have you installed the drivers for the camera on the computer?

  Check if the camera is detected in Device Manager.
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  
  Method 2:
  You can try the steps from the link to transfer images from the camera to the computer.
  How can I get pictures from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer
  Method 3:
  Try the link troubleshooting steps:
  Troubleshoot camera connection:
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Method 4:
  If you have any problem with USB connection then try the steps from the link:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply as well to Windows 7.

  Reference links:
  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Working with digital images
  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures

• Built a new computer, kept the hard drive from my old computer but had Vista OEM

  I have set up a new computer, but kept my hard drive to save money, I did not know that that I was not allowed to do, and now I'm stuck without a computer! Rather than buying a new copy of windows is it possible to get my renewed series and re - install off a friends Vista CD? I'm in the United Kingdom if it makes a difference to contact departments/services on this subject.

  If Vista is preinstalled on your computer, or you purchased an OEM disk/license, it is non-transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to get any audio from webcams built in mic

  I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

  Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

  I don't really know what to do and how to solve this problem, can you please help me.

  So thank you for your time

  On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

  To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

• Internal webcam does not work, but the microphone does

  I have a Toshiba Satellite C655-SP5183M and whenever I try to use my Webcam it says that it does not work.  I looked in the drivers, and it says that the Webcam is not plugged, but it is an internal webcam.  I have re-downloaded the software, but that has not solved the problem. Whenever I try to use my Webcam, a message pops up saying: "the Web camera initialization failed.  Please check your device and restart the application or computer. "What should I do to fix this?

  Hello

  Modifications were made to the software or the hardware of the computer before the show?

  Method 1:

  If you have not installed or updated drivers, then visit the link given below, download the drivers and install.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?modelFilter=C655-SP5183M&RPN=PSC2EU&category=&selCategory=2756709&MOID=3031745&OS=&CT=DL&selFamily=1073768663

  Method 2:

  Visit the link below and run the Fixit

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  from the link below, this article applies to other webcams, follow STEP 4 and step 5 .

  LifeCam software displays an error message or the video preview is empty.

  http://support.Microsoft.com/kb/933311
   

• Display of the webcam in my computer - Vista

  How configure you the built in webcam to be displayed in the list of my computer connected hardware, alongside the C: drive / drives and external hard drives etc. The laptop is a Toshiba satellite l300 and the built in web cam is a Chicony usb 2.0, I have all recently installed drivers.
  Summer search this feature for a while now, but I can say that the option is available in XP, not Vista.
  Y at - it a program or a feature that can be installed to view the webcam in my computer?

  Hello James,.

  Thank you for posting.  The first thing we need to do is to ensure that your drivers of the device have been loaded properly.  Click Start, then right click on computer and then click Properties.  Then, click on Device Manager and scroll through the list and make sure your camera as a device installed without any indicator error.  Tell us what you find.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer can not detect the printer so that connected via USB

  My computer runs on Windows 7 Professional and my printer is model # D110a.

  My printer has worked fine since I got it, but a few weeks ago, my computer has been infected by a virus that forced me to reformat and reinstall everything. I installed the necessary software from the installation CD supplied with the printer, but when I try to connect my printer through the 'Add Device' option in the Configuration menu, my computer does not detect even if the printer is on and physically connected by a USB cable.

  Help please, I don't have the money to buy a new printer.

  No problem. Just glad that you solved. Can you go ahead and mark this as resolved to close issue? Thank you.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I fixed the fan from my computer, but then internet stops working

  Sometimes, when I start my computer, it displays a message saying that the CPU fans work shutdown? (Y/N).
  Then I opened my computer and move some cords around so it works again, but then the computer does not detect the internet card more. Sometimes to solve this problem I let it sit for a week, but I need to use it now!
  Help, please!

  (This happens on another computer I do use one I use to post)
  I can't open system information for a reason any

  Computer to computer record does not:
  OS: Windows XP Professional SP3
  Graphics card: NVidia Geforce 6200
  Network: 3Com Etherlink?
  Manufacturing: MSI?
  Processor: AMD Athlon XP 1600 +.
  Sound: Turtle Beach Santa Cruz

  Hello

  Make sure that the network adapter is in the PCI slot.

  If it does, and it's not working, then try another card.

  Here's an example: http://www.newegg.com/Product/Product.aspx?Item=N82E16833156107

  P.S. Consider that pushing the thing around you can judge the computer unstable. Think twice before wanting to put money in such an old computer.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.