Webcam does not work after update WIn10

Dear Sir? Madam President.

I just want to do a short complaint, I have improved my windows7 for Windows 10 & since I update it cannot make a video call in Skype and fm messenger more. I try it troubleshooting through apps to find and correct but he says "device could not be migrated."
What will I do now? need you to help me please?

Thank you and best regards,
Violeta

What model of laptop do you have?

Tags: Toshiba

Similar Questions

  • Satellite NB10t-A - Webcam does not work after update Win8.1

    Hello

    I have recently upgraded to Windows 8.1 and then my Webcam does not work... I checked if I have the driver in Device Manager but I couldn't find it. I don't know how can I fix what I was looking for driver thosiba Web site but got no results.
    Can someone help me?

    Thank you

    The BIOS usually contain an option to enable and disable the internal webcam.
    Go to the BIOS by pressing F2 and then check if the webcam is enabled.

  • Integrated webcam does not work after update from MS Essential

    I have a Dell XPS 15, and the built-in webcam worked perfectly, until the Microsoft Security Essentials - KB2310138 (1.131.1448.0) update that happened. Now I can't access the webcam (not found in the Dell Webcam Central) and can't even see the built-in Webcam listed in "imaging devices" in Device Manager. I tried a system restore to a point before the upgrade, but still the issue was not fixed. Please suggest the solution to this problem.

    [proposed by the moderator at the Windows/Hardware forum space]

    Dhruv Mendiratta,

    Windows 7 is guess to provide the drivers of webcam for most Dell computers, except some XPS models. Go to the drivers & downloads type your service tag, then your service number. Under entry, webcam drivers should be there.

    PLEASE READ AND ANSWER THE QUESTIONS THAT I ASKED, BELOW.

    Recently install you / reinstall the operating system? If so, have you installed the drivers I have the right order? How to download and install drivers in the correct order

    Try to read...

    Troubleshoot the Dell Webcam and the Dell Webcam Central software

    Also try running the Webcam Diagnostics

    The webcam showed in the tree of the symptoms?

    Error messages?

    The computer is under warranty?

    Rick

  • Acer Crystal Eye Webcam does not work after update from adobe

    When my adobe flash player ActiveX 11 updated my webcam on my acer 5740g has stopped working, all I get when I turn it on is a white screen. What should I do to rectify this guy please?

    Do the system restore so you can return changes made to your computer.

    Click the Pearl button or start > programs > Accessories > system tools > system restore

    Select a date when the computer was working again fine. Launch the restore by choosing a restore point. Let the thing. Check.

    David

  • Satellite x 200: Webcam does not work after I have connection on Microsoft messenger

    Hello everyone

    I have a Satellite x 200 SLI and for some reason any webcam does not work after I login on messenger... Even when I disable messenger and even disable internet... it still does not. Only when I restart the operating system.

    Anyone has an idea on how to solve this problem?
    Already did the updates but still, anyway.

    Hi Gabriel

    Check it out!
    I noticed several discussions on this issue, it would be really interesting to know if the SP1 fixes this annoying problem

    Your comments would be appreciated

  • Ethernet USB adapter does not work after update to sierra mac

    Ethernet USB adapter does not work after update to mac sierra.

    Please solve this problem as soon as POSSIBLE

    Hello guatamshah,

    If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

    The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
    Reset the management system (SCM) controller on your Mac.

    https://support.Apple.com/en-us/HT201295

    How to reset the NVRAM on your Mac.
    https://support.Apple.com/en-us/HT204063

    If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
    OS X: about system information and System Profiler

    https://support.Apple.com/en-us/HT203001

    If she does not appear in the information system, see the articles below.
    macOS Sierra: If a USB device does not work

    https://support.Apple.com/kb/PH25343

    macOS Sierra: check your device's USB connection

    https://support.Apple.com/kb/PH25567

    However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

    macOS Sierra: Add a network service
    https://support.Apple.com/kb/PH25279

    If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

    Kind regards.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • autorotation does not work after update 8, 1 wind - W510

    I have a tablet with docking station and 32 GB w510

    the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

    I ve installed the latest driver form acer download page and Windows update.

    then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

    What can I do?

    PS the camera does not work

    -solution for me! ----

    I don't know what happened, but I'll tell you what I did not last:

    I have the European version of Windows 8.1 N(without Media Feature Pack)

    1. reinstalled microsoft silverlight.
    2. search for update---> silverlight update available!---> installed!
    3. reset
    4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
    5. reset
    6. Search again---> new available updates updates---> installed
    7. reset!

    now, camera, autorotation and all the apps work for me. I hope this will help you

    Best regards

  • Dual booting of Z3 tone does not work after update Marshmallow

    Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

    I don't think he has a...

  • Gyro does not work after update 6 Android on z3 D6633 double

    Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

    Issue edited by Rickard

    @dipuvellara

    Could you try to restart in safe mode and test again?

  • First Adobe Pro CC does not work after update code 0xc000001d

    First Adobe Pro CC does not work after update code 0xc000001d

    W7 OS 2

    Hi Gernots,

    For a fix, update for first Pro CC 2015 (9.2).

    Thank you

    Kevin

  • Sony VGN - CR220E Webcam does not work after installing windows 7

    I recently installed windows 7 (not updated, clean installation of windows 7 on my Sony VGN-CR220E, and now my webcam does not work.

    Have already tried the tricks I know and searched the web and there are many others having the same problem, and there are number of recommended suggest solutions. Have tried several of them and has not worked for me after 2 days. Can someone who has actually had this problem and managed to fix it, please let me know.

    Thanks in advance...

    install http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNCR220E&upd_id=5051&os_group_id=6

Maybe you are looking for