Webcam help
I have a HP Touchsmart 9100 with a built-in webcam, but I don't know how to use it. There are no guidelines I know to use the webcam. Could someone please help me understand how to use it?
Thank you!
Hello
Please follow one of these links to fix.
XP:
http://support.HP.com/us-en/document/c00678231
Vista:
http://support.HP.com/us-en/document/c01560721
Windows 7:
http://support.HP.com/us-en/document/c02452221
Good luck
Tags: HP Desktops
Similar Questions
-
Card wireless &; Webcam HELP! (dv9620us)
Hello!
I have a HP Pavilion DV9620us. Operating system is Windows Vista Home Premium (64-bit). Basically the jist is that my sister had improved (terribly at that) to Windows 7. Since nothing but problems! His sometimes would come in and out, webcam does not work and even Wi - Fi crashed on me. One way was through an external USB adapter.
Anyway, didn't recovery disc (also another long story). Well, now after having read and seen all the oddities bit this device had with others who have gone to Win 7, I opted to go back to my original Windows Vista Home Premium. It's like a brand new computer, everything seems to work like a charm.
I had the sound and microphone to work. It works well. Without crashing. No overheating. Even the power and battery work well. However, I can't get the model to detect the Webcam (there is not yet an option / listed in the Device Manager) and is not the wifi card.
I need help with these two. Especially with wifi. (I had everything else including LightScribe work properly).
Would the removal of the map and the relocation of the work? If not, you should buy to replace with what card? (I know how to do these things and am not happy to have to use a usb network adapter)
I also installed the Suyin Crystal Eye webcam software, but the laptop doesn't always detect it. It is not important because I never use, but would like to help with wifi!
Thank you!!!
You are the very welcome.
Based on the rate of epidemic failure of motherboards on this series of model, I would say that the situation is desperate.
Time for a new or reconditioned newer model laptop.
-
Compaq 2710p Webcam help.
Hello. can you help me to install my webcam for HP Compaq 2710p? Thank you!
Hello
The following book may help:
http://h10032.www1.HP.com/CTG/manual/c01455314.PDF
Kind regards.
-
IK heb men aktie hd camera vehicle dvr camera en ik heb hem al n tijdje maar ik d8 omdat hij ook als webcam used kan worden d8 ik van ok we dat doen en toen heb ik goede eens laten drivers geinstalleert maar hij geeft iederekeer ee nfoutmelding aan als ik hem opstarten wil dan doet dij 3 keer ee nraar geluid dat hij het niet doet en hij geeft aan dat driver niet geinstaleert is While hij wel is geinstaleert help plzplzplz!
Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
Kies uw taal vervolgkeuzelijst onderkant van aan ITU of pagina om your question you posten in Taal van uw keuze. Post on the forum without jij het is voor Frans. ALS I niet vinden baking taal, support van jullie voor boven additional international Geraardsbergen kan
http://answers.Microsoft.com/nl-NL/site/setlocale?URL=http%3A%2f%2Fanswers.Microsoft.com%2Fnl-NL%2Fwindowslive%2Fforum%3Ftab%3Dunanswered
-
There is no software to open my webcam, help!
Hello
I need help.
I have a HP Mini 110-3713tuPC
Product number: lv829pa
OS: Windows 7
It has a webcam installed but I can't use it because there's no icon or the software.
I remember when I bought it has an icon like the camera on the desk.
But I ask someone to update both because the OS when I bought is a Windows7 Starter for other functions of Microsoft Office are not available as powerpoint...
After that, there is no icon now, no software to open my webcam. I need to take pictures and also videos now.
Can someone help me please?
I don't know much about software and other, help me please.
Hello
Download and install the WebCam software on the link below.
http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53106.exe
Kind regards
DP - K
-
Satellite M200 - Chicony webcam not compatible with Skype
Greetings!
I have a Satellite M200 series and my Webcam Chicony works very well with YM. When I tried to use it on Skype, he'll tell me that "Skype has not found video source preferred. Webcam can be used in another application. Then I tried to move to the tools in Skype and checked the video settings, I changed the cam of default for a Chicony USB 2.0, still the same error message. The next thing I did was open the software assistant camera, but by clicking on the buttons will do nothing. I can open the device itself. So, I updated the device driver in Device Manager and the result is that I had the best and the last driver installed. Still not working in Skype.
Any suggestions? I'll be very grateful for any help. Thank you.
Hello
I think that Skype is one of the best applications to work with the webcam. I use it on the first day of purchase and there is no problem at all.
What you can do is to restart your laptop, switch-webcam help software, start the Skype and try to configure the webcam in Skype settings again.He has to work. It works on my Satellite P200 and my Satellite U400 friends. He has to work in your case too.
-
How to use the webcam integrated to take a picture?
Original title: integrated webcam help!
I'm trying to figure out how to start just the webcam, I can take a picture. The only way I can get to get here is when I make a call to Skype. I don't want to make a call, I want to just take a picture with my webcam! Help, please!
Hi miap7,As you have a built-in webcam, you can refer to the manual for the computer to know the same.You can also let us know the make and model of your computer to help us find the information for you. -
Since the upgrade to windows 8.1 my webcam/camera screen is empty
Since the upgrade to windows 8.1 my webcam/camera screen is empty. The light on the cover but no picture. Help...
Did you open her camer app which is part of Windows 8.1? Have you installed the driver for the webcam?
Windows 8.1 Webcam help
http://Windows.Microsoft.com/en-us/Windows-8/camera-app-FAQ
It would help if you identified your laptop with its full product name or product number.
1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.
2. the full version and the name of the operating system you use (IE Windows 7 64-bit).
3 see. you an error message or code blink?
5 post the processor and chipset installed if you know
4. is your laptop still under warranty? Check the status of your warranty here.
-
Cannot find dell central webcam on the computer windows vista laptop.
I can't find webcam, help pleaseee?
Hello
· You have been provided with any type of disc when buying?
The software of 1:Check step. http://support.Dell.com/support/downloads/ please make sure that you select the correct version of windows.
Step 2: if not, I suggest you contact Dell for the software.
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to activate Webcam ON app WIndows 8?
* Original title: how to turn on or find my web cam ap?
How to find and use my webcam on windows 8?
Hello
See if this helps you >
"App photo and webcams help."
http://Windows.Microsoft.com/en-us/Windows-8/camera-app-FAQ
"How to use the Webcam integrated with Windows 8?
http://superuser.com/questions/499858/how-to-use-built-in-webcam-with-Windows-8
See you soon.
-
Acer aspire 431p webcam unknown driver v5
My webcam does not work, whenever I have try my applications that have need of the camera, it says please connect the camera in Device Manager, the webcam is unknown with a yellow fr on it and I really need my webcam help will be much appreciated and also ive tried system restore but I haveno points of restoration before I installed updates the win8 (implementing webcam updated couldve been the problem) thanks
Hey Riki,
Thank you for the update.
What is the exact error message you get associated with Photos app?
Earlier you got the error code 43 for the device, which means one of the motors controlling the unit notified the operating system that the device has failed in some way. In other words, that there is a possibility of defective material. We tried to uninstall and reinstall the drivers for the device, and then he worked for a while and it stopped working again. Now, I suggest you to check if the same error code is listed in the Device Manager. If she says the same error code means that the device is defective. Thus, it would be better if you contact Acer hardware support for assistance.
http://community.Acer.com/T5/Acer-Forum-discussions/CT-p/boards
You are always welcome in our community for other issues related to Windows.
-
How can I configure the lifecam system?
I don't know anything about the system. your expedited procedure is not good if you know what is needed to set up the contact, everyone should be on live messenger? How can I da% one?
what I need is information that must implement the system of lifecam a 90 year old electronic nerd.
George osborne
.
Hello
MicrosoftHelpNow.com is NOT really Support Microsoft. In fact, they are not Microsoft Partner
or even Microsoft Certified. So be very careful about the use of these 3rd party online support services
Since many are very poor or even scammers.
http://microsofthelpnow.com/Frankly, I would not use this service.
=========================
See the online documentation and drivers for your LifeCam:
Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more
http://support.Microsoft.com/ph/7746#tab1WebCams - Drivers and Documentation
http://www.Microsoft.com/hardware/en-us/downloadsWebCam help & resources
http://www.Microsoft.com/hardware/en-us/support/how-toMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxSupport for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspxand:
http://www.Microsoft.com/hardware/en-us/support
Microsoft Hardware - contact us
http://www.Microsoft.com/hardware/en-us/support/contact-usMS hardware supports and warranty claims (support for 90 days from the date of the 1st call).
1-800-936-5700I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Microsoft LifeCam Cinema installation problems
Try to install Microsoft LifeCam Cinema 3.5 on my home Windows XP - SP2. Downloaded the software, but for some reason it does not recognize that the camera is connected. I unplugged the unit and tried different USB ports, but nothing seems to work, even if we are able to download photos from our camera using the same USB ports. Any suggestions?
Hello
See the online documentation and drivers for your LifeCam:
Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more
http://support.Microsoft.com/ph/7746#tab1WebCams - Drivers and Documentation
http://www.Microsoft.com/hardware/en-us/downloadsWebCam help & resources
http://www.Microsoft.com/hardware/en-us/support/how-toMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxSupport for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspxand:
http://www.Microsoft.com/hardware/en-us/support
Microsoft Hardware - contact us
http://www.Microsoft.com/hardware/en-us/support/contact-usMS hardware supports and warranty claims (support for 90 days from the date of the 1st call).
1-800-936-5700I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have a gateway 831GM Intel (r) Pentium (r) 4 CPU 3.00 GHz 3.00 GHz, 3 GB of Ram under Windows XP 2002 SP3. I installed Microsoft Lifecam Studio camera (part No.: Q2F-00001) and had no problems with it. Used a Sunday for Skype and Monday when I tried to open Skype and Microsoft Lifecam the message - "there no camera connected to this computer." I noticed that the blue on the camera lights at all. I have disconnected the camera, reinstalled hardware, the driver updated and rebooted (all combinations of each process). Am I missing something or is my camera old 2 months already undesirable? As a first time - disappointed camera buyer.
Hello
WebCam - help
http://www.Microsoft.com/hardware/en-us/support/how-toMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxSupport for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
http://www.Microsoft.com/hardware/en-us/supportSupport for Microsoft mouse, keyboards, LifeChat, LifeCam & more
http://support.Microsoft.com/ph/7746#tab1MS hardware supports and warranty claims (support for 90 days from the date of the 1st call).
1-800-936-5700==============================
If you also find yourself needing support Skype:
E-mail address is removed from the privacy *.
Skype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
LifeCam VX-3000 only works after a previous windows update
My Lifecam doesn't work on the web, the software works fine on my PC, what could be the problem? I have Vista x 64
Hello
When you say that it does not work on the web do you mean like
Skype or a mail program online? If in order to verify that
support of the program.If it is Windows Live Messenger failure here:
Answers - Windows Live Messenger Forum
http://answers.Microsoft.com/en-us/windowslive/Forum/MessengerFor Skype
E-mail address is removed from the privacy *.
Skype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/For other programs, you will need to check their support.
===============================================
Select start - all programs for camera or WebCam LifeCam.
LifeCam products
http://www.Microsoft.com/hardware/digitalcommunication/ProductList.aspx?type=LifeCamSupport for Microsoft mouse, keyboards, LifeChat, LifeCam & more
http://support.Microsoft.com/ph/7746#tab1WebCams - Drivers and Documentation
http://www.Microsoft.com/hardware/en-us/downloadsWebCam help & resources
http://www.Microsoft.com/hardware/en-us/support/how-toMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxSupport for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspxand:
http://www.Microsoft.com/hardware/en-us/support
Microsoft Hardware - contact us
http://www.Microsoft.com/hardware/en-us/support/contact-usMS hardware supports and warranty claims (support for 90 days from the date of the 1st call).
1-800-936-5700I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Hello One of my partners in New York has just e-mailed me to say that when he went on our site www.101BusinessInsights.info a huge banner appeared on his say screen "not a trusted and legitimate site that businesses have confidence in Firefox" Please
-
Re: Satellite C650-16R - problem with cable internet
Hello I have laptop Toshiba Satellite C650-16R and legal windows 7 installed so I have not installed all the drivers except the graphics card because the resolution was not good. Now my problem is that I have some missing ethernet controller drivers
-
Bay of cluster fails to initialize constantly
I have a program where I have a table of cluster that enters a while loop like a shift register, and then is then indexed in a loop for to act on each item individually. To do this, the Bay of cluster must be initialized before the while loop, other
-
I finally found my product key, but the machine won't let me put in
for the last two months I tried to enter my product code that I finally found on the basis of my computor & double checked repeatedly, but trying to get the code that your machine keeps telling me there is an error & to check the code again. After 2
-
HP6520: Server connection error: 403
Hi, I have problems with my all in one printer. The above error message is coming when I try to scan to e-mail. It worked very well, he is very picky. I tried the recommended fix by manually entering the DNS 8.8.8.8 & 8.8.4.4 number but no joy. Can y