There is no software to open my webcam, help!

Similar Questions

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• Cannot get my LifeCam software to open

  Separated from this thread.

  I am running Windows 8.1 and I can't get my LifeCam software to open. I can't activate it, I can't use it for Skype.

  I downloaded the firmware and software, and even my system shows as a device in "Devices".

  It is not an app for that I can find.

  Can someone help me?  The main objective is to use it for Skype.

  Thank you

  Jeff

  Hi Jeff,

  Please write us with the following details.

  (1) where have you installed the firmware and software?

  (2) what happens when you try to open it? You get the error message?

  (3) what is the LifeCam model number that you are using? For example, LifeCam Cinema,

  LifeCam LifeCam HD-5000, HD-3000.

  Follow the steps in the link below and check if it helps.

  Troubleshooting: Webcams

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Let us know the status of the issue.

• "There are insufficient resources to open another file" to the shared folder

  Microsoft Highway 2006 *.axe of restrictions on file for sharing

  Good afternoon

  In our Organization, we use Microsoft highway with a *.axe shared with bugs all over the United Kingdom and Europe.

  Currently due to the size and more and more people using the file, it appears that when a number of users are connected (do not know if there is a maximum restriction) new users trying to open the file download "There are insufficient resources to open another file"

  After testing when a user leaves the file, the user receives the error can get in fine arts and the work user that disconnected Gets the error.

  I had our server guy answering the question if there is no restriction on the server that might be at the root of the maximum number of users to access a file, but I said that there is no restriction.

  Does anyone know if the application has restrictions that cause this?

  I hope someone knows the answer!

  Thank you very much.

  Hi rhodzy,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  TechNet Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Are there 3rd party software to make .mov movies in Vista or windows7

  I have too many clips in .mov to convert to the Director of windows .avi format. Are there 3rd party software that works on windows 7 available for download?

  Hello

  You can use your favorite search engine and find the conversion program that converts . clips from MOV to convert to .avi format.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• A customer sent me a file that are plans of its architect. I can't open this file because it is a .dat file. is there anyway that I can open it?

  A customer sent me a file that are plans of its architect.  I can't open this file because it is a .dat file.  is there anyway that I can open it?

  Ask your customer what program he used to create the file. Steve Winograd, Microsoft MVP (Windows desktop experience)

• Is there a safe way to open a rar file using a windows program?

  original title: open rar files?

  downloaded a file that turned out be a rar file.

  Someone told me that I should never open rar files because they contain viruses.

  Is there a safe way to open a rar file using a windows program?

  I downloaded a file that turned out be a rar file.

  Someone told me that I should never open rar files because they contain viruses.

  Is there a safe way to open a rar file using a windows program?

  RAR files are not more likely to contain a virus or Malware any that any other file. (Assuming that you are not running a decent AV program).

  Read about RAR files here and you can download the RAR Extractor free Frog.
  http://download.CNET.com/free-RAR-extract-frog/3000-2250_4-10804840.html

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I need a free software to open rar files

  I need a free software to open rar file

  I need a free software to open rar file

  http://7-zip.org

• I need a free software to open vcf file

  I need a free software to open vcf file. I need software to open vcf file and convert vcf file to word.

  I need a free software to open vcf file. I need software to open vcf file and convert vcf file to word.

  This is a freeware to open vcf... This will help you

  http://www.freeopener.com/open-my-files/?ext=vcf

  on the other

  http://www.Softpedia.com/get/Office-tools/other-Office-Tools/vcf-Viewer.shtml

• is there any MS software to program microcontroller unit

  is there any MS software to program microcontroller unit

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Windows native development Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/category/windevgeneral

• Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

  Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

  Hey Billo,

  Could you please let me know, if you are able to see an option to "Create a new catalog" on the lower left corner of the window.

  Also, if possible, could you please attach a screenshot of the window that you see.

  Kind regards

  Tanuj

• I tried to open my creative cloud and he said, it has been updated, but there was no progress. Then I tried singing and signing in and there is still no progress. Can someone help me please?

  I tried to open my creative cloud and he said, it has been updated, but there was no progress. Then I tried singing and signing in and there is still no progress. Can someone help me please?

  After the closure of these processes you can restart your machine and try to install creative cloud.

  Waiting for your response.

• Is there an API or the open Interface to convert price lists?

  Hello
  
  Is there an API or the open Interface to convert price lists?
  
  What are the additional configurations you need to enforce price lists?
  
  IM new Advnaced price and order management.
  
  Thank you and best regards,
  
  MPH

  Ignore the first API you mention who has a different goal. Personally, when I load the price lists I always use a loading rather than an API tool, but if I had a large number of large lists of price, I'd probably use this API, as seems to be better supported and documented by Oracle:

  (Note 435473.1 on MOS)
  [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=WHITE%20PAPER&id=435473.1] QPXVBLK: Pricing of bulk loader API including PS data: import of the details of implementation of price list and examples of Scripts block

  ... and there are many examples of scripts to help you here (Note 360060.1 on MOS)
  [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=SAMPLE%20CODE&id=360060.1] QPXVBLK: Price list in bulk Loader example for 11.5.10 Scripts free

  Kind regards
  Jon

  PS... and Yes, it works for 11.5 per 12.1.3 notes above

• Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11

  Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11, version 12 is sucks.

  Hello, Simone

  I'll assume you're on Windows 7. Windows Media Player 12 is not supported on Windows Vista or XP and as such, you will need to go back to Windows Media Player 11.

  You can check the permissions in the registry to ensure that it is able to record information.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Open the registry editor by clicking on start, type regedit.exe in the search box and press on enter, you may be prompted to continue.

  In the registry editor, navigate to HKEY_CURRENT_USER, Software, Microsoft, MediaPlayer, then Preferences.

  It should be an element named LastLocation_26, right-click on it and select Rename, and rename it to old LastLocation_26.

  Leave the open registry editor and open Media Player, then move it to your favorite place and close Media Player.

  In the registry editor, press F5 on your keyboard and check if LastLocation_26 has been recreated.

  If this is not the case, there is probably a permissions problem.

  If so, the location must be registered.

  Let us know.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

  ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

  We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:

  1. press the "Power button" to activate the product.

  2. with the product, unplug the power cord from the back of the product.

  3. disconnect the power cord from the wall outlet.

  4. wait at least 15 seconds.

  5. plug the power cord into the wall jack.

  6. reconnect the power cord to the back of the product.

  7. If the product does not light by itself, press the Power button to turn it on.

  Once done, print a self-test report by following the next steps:

  1 load plain white paper in the input tray.

  2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.

  4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.

  If the report is printed correctly, try again to print your original document.

  If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:

  1. remove the stack of paper from the status bar.

  2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)

  3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.

  4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.

  5. press on the stack of paper on a flat surface to align the edges.

  6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.

  (Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).

  Once you have checked the status of documents, reload the tray in the following way:

  1. lift output in open position and open the door of the feeder.

  2. slide the width guide to its outermost position paper.

  3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.

  4. adjust the paper width guide so that it rests against the stack of paper.

  5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  GuruAid.com