Webcam works not metro style applications but works in desktop mode.
Webcam works not metro style applications but works in desktop mode. It worked fine until the windows updates are not installed.
I tried all the other solutions but still webcam not working do not. Please answer as soon as possible.
Hi Anurag,
Perform the steps mentioned below and see if it helps.
a: Install the latest drivers from 1/13 legacy for Windows 8 (reboot if needed later)
b: Open Device Manager (right click on computer, click on properties, then Device manager on the left column)
c: Expand display adapters and right click on your graphics card and click on Update driver software
d: Browse my computer for driver software > let me pick from a list of device on my computer drivers
e: Select the driver that has (Microsoft Corporation - WDDM v1.1) at the end and click Next.
Hope this information helps.
Tags: Windows
Similar Questions
-
I use windows 8 pro edition on my desktop. It doesn't have a built-in webcam. I use Zimny-700wc cobera webcam. I installed the software and it works very well in desktop applications, but it does not work in windows 8 metro style apps like camera application. I'll try to find a solution for a month, but I have failed every time.
This is my first Forum. Please help me.
Thanks in advanceHello
Right-click on the camera application and select uninstall. Then, from the Windows Store, search for camera and install the exact camera app.
If this does not work, you may need to reinstall the webcam.
-
On windows 7 64 bit. Sometimes reader XI (11.0.09) begins the process but does not appear in the applications. In this case however the application is started for example start menu, double-click on pdf, double-click AcroRd32.exe. He
11.0.09 is put on hold for us - supported by 11.0.08 solves the problem
-
Windows does not start after update, but starts in safe mode
last night my laptop set to day, I turned it off and when I started today he went straight to the safe mode selection screen. I chose to start in normal mode where it just went to blue screen, just a flash so I couldn't read what is on it and then restarted itself. I then chose safe mode with network boot and he finished making the update without problem, so I rebooted and tried to start up normally, but still it restarted itself, so I went back to safe mode which is what Im use it as today.
as far as I know that it does not crush power or coward during the update and cannot think it's updating itself that causes the problem. Ive tried to do a system restore but it says theres no restore to restore points.Can someone please help me because running in safe mode is maddening as theres no graphics driver and the resolution is horrible.Thanks in advanceHayleyMaybe a start of repair:
http://Windows.Microsoft.com/en-AU/Windows-Vista/startup-repair-frequently-asked-questions
-
After that I upgraded 6.5 Skype integrated webcam does not work.
Original title: 6.5 Skype
I have computer laptop dell XPS 17 L702X when I update 6.5 Skype on-board webcam don't work when downgrade 6.3 Skype webcam embedded work? I try on Windows 7 and Windows 8
Hello
-You get an error while trying to access the webcam after installing Skype 6.5?
We can refer to this article and check if that helps.
6.5 Skype and the built-in webcam does not: http://community.skype.com/t5/Windows-desktop-client/Integrated-Laptop-Webcam-does-not-work-with-Skype-while-USB/td-p/1711452
If the problem persists, you can ask your question to the Skype community: http://community.skype.com/?category.id=English
Thank you.
-
Windows 8 - in the top left corner is no longer showing open Metro style apps
I noticed recently - I have not seen of Windows installed on this computer (only Windows 8 Pro) 8.1 and I say this because I know there is a setting to disable this point 8.1, but for some reason any, it seems that the upper left hot no longer works. I can open Metro style apps, but when I switch to the start screen or desktop, these applications do not appear when I put my mouse in the upper left corner.
Opening my task manager shows that they are still there and 'open', but I can access it quickly from the top left corner of warm. Instead, I click on the shortcut on the start menu, or "switch to" in the Task Manager.
Anyone see this before and know how to fix?
Thank you
E. Sylvain
EDIT: If it makes a difference, I have 8.1 installed on another machine of mine, but I do not have this setting disabled anyway. I can have extinguished it at a good time - so I was wondering if the auto-sync parameters into account maybe pushed this setting on this computer as well (if that is possible by mistake) and then not reversed after that I changed it back?
I know there is a setting to disable this point 8.1
I think it was in Win8 too. And it's easier to find in it. Evidence that it was in effect would be that Win + Tab would not show the application Switcher even though there is to switch to other applications. Win - W G (or how ever many General you must type) gets you there IIRC. For example, you can disable the other but not the first if you want to see the App Switcher.
BTW I now found it in W8.1 under the corners & edges, but there is no shots of Win - W for App Switcher, that would be my first guess. The description can be a little more clear than in W8. For example now that they can be distinguish allowing switching (although WTH did reject it average?) and drag from left to right. This kind of thing is always the last to be changed when a new version is created.
FYI
Robert Aldwinckle
--- -
I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application. Help me please!
For a built-in webcam see this support from manufacturers or their forums.
You could I think trying a boot minimum http://support.microsoft.com/kb/929135 and see if its then OK
-
Internal webcam does not work, but the microphone does
I have a Toshiba Satellite C655-SP5183M and whenever I try to use my Webcam it says that it does not work. I looked in the drivers, and it says that the Webcam is not plugged, but it is an internal webcam. I have re-downloaded the software, but that has not solved the problem. Whenever I try to use my Webcam, a message pops up saying: "the Web camera initialization failed. Please check your device and restart the application or computer. "What should I do to fix this?
Hello
Modifications were made to the software or the hardware of the computer before the show?
Method 1:
If you have not installed or updated drivers, then visit the link given below, download the drivers and install.
Method 2:
Visit the link below and run the Fixit
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3:
from the link below, this article applies to other webcams, follow STEP 4 and step 5 .
LifeCam software displays an error message or the video preview is empty.
-
Metro style UI works is not in windows 8.1 using every night?
IAM using a pc windows 8.1. If iam working using mozzilla firefox metro style interface using firefox nightly. But always night opens the desktop version and I'm willing to work on the subway style UI for firefox.
The metro UI style was killed a few months ago because there were less than 1000 people who use it.
-
Satellite A300-1NO - webcam does not work, but the LED lights
Hello!
I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.
Is there any solution for this?
> Is there any solution for this?
I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.
One more thing: have you noticed this problem in the first moments after installing Win7 or later?
Have you installed something that may be the reason for this? -
Webcam does not work on Skype, but I can get a preview in the video settings
My webcam is not working for Skype calls, but I can get a preview on the Skype video settings and it also works on the various programs and services that use the webcam. This problem occurred recently when Skype has updated to the new layout
Hello
Sorry for wasting time, but the problem was that were far too many people in the Group call and that smaller groups make the video work
-
I accidentally deleted the Acer Crystal Eye Webcam and I'm re - install, but it did not work.can you please help me how to recover my webcam? I use aspire 4738ZG.original title: re install my webcam
Most often, when a device is not working because of a driver. Try reinstalling your.
It works for win 7 & 8
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1
-
Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected
Hello
Since you said it worked very well recently, I'll try to do a system restore at this point in time.
See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1
In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.
See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1
-
I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr
What... do not know any solution.Hello
Please try to post your query in communities:
General discussion of Photoshop
Kind regards
Sheena
-
Satellite L350 - Webcam does not work, BUT NOW IT DOES
Hi all
Very recently, I bought a L350 pre-installed
On the first day of use then the webcam does not workI always get a window with the header "HELL."
The text: "webcam driver open fail. Please restart camera or computer.
All you can do is to click on an "OK" button to close the window and that is it!Any help to solve this problem with is welcome...
Thanks in advance
I HAVE THE SOLUTION!
Just update the driver, I got the version 6.0.6001.18000 from 21/06/06
After update: version 6.2.238.214 02/14/08The webcam works!
How early?
Start--> Panel--> System-->--> Imagedevices--> Chicony USB2.0 device--> use tab Manager driver--> updated... Windows Vista looks like an update, believes that it is and install...
And the thing doesn't work!Hope I was of any help
Post edited by: mvereecken
Here in the forum are already discussing this issue.
A user named Akuma posted an interesting solution to this problem then try it. Maybe it will help you.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549In addition it could be useful too:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=154131
Maybe you are looking for
-
Satellite C70D - A - 11 d - no sound, random
So I bought this laptop a few months ago.For the past few weeks the laptop has stopped playing sound.I watched a stream in Chrome. So actually, I should be able to see the reading in the table of sound mixing.But I was not able to play any sound or g
-
Satellite C660 - my camp is hard to start
My laptop is a saterlite c660-c66od running windows Server 2008 32-BIT with 3 GB of ram and he started to move slowly, then the whole system crashed I rebooted it and then it wouldn't load saying my hard drive was not able to start I then booted in l
-
Compile the application successfully but no. Ui component on the screen
I would like to take this opportunity to thank the community for all the post and responses during the year, you guys are too... I have a sample application that I work on and I have a few questions, my application does not display the bitmap to the
-
The GoldenGate tuning white paper (http://www.oracle.com/technetwork/database/availability/maa-gg-performance-1969630.pdf) recommended setting based on the integrated replicat process number streams_pool_size. It says nothing about parallelism, as i
-
First export keeps flickering...
I need help FAST!In my sequence of editing when I edit and things, everything seems fine... BUT when I then export the flickering starts... sometimes, he is very good at the beginning of the video and then it starts in the middle and sometimes that's