WebEx meeting Server 2.0 - setting up the smtp server

Similar Questions

• Cisco Webex meeting server usually ask Q & A - CWMS

  At a query concerning Cisco Webex meeting server below to the questions from customers,

  Appreciate if anyone has the answer please reply and help, thanks in advance.

  --------------------

  Q1.  We can block a current mtg (possible venue) where
  We cannot arrest anyone joining after the session started
  If a participant who was invited to the meeting trying to reach the end?

  Q2.  Slide the CWMS running 6 virtual machines inside.  For 50 simultaneous
  user-systems, is only 1 VM - the VM admin who also makes the web and
  functions of the media?  Also, in the superior user-concurrent systems numbering, make virtual machines
  Break-in of the separate machines for ESXi?

  Q3.  If you add users to the CWMS, only two modes are available:
  the hosts or administrators. Please correct me if I'm wrong - hosts are those who can
  program / participate / host the meetings. How to differentiate and control a crowd
  only attend but not host meetings?  If all users are added in an organization
  as hosts in the CWMS, control the use of the licenses will be difficult, no?

  Q4.  Can deploy us CWMS on VBlock?

  Q5.   How invite us someone to a meeting if it is not a user on the
  CWMS (as external consultant)?

  Q6.  Referring to the Q5, how would someone outside of the Organization
  (i.e.  stakeholders) be validated and authorized to participate in a meeting, especially
  If it does not use Ms Outlook?

  Q7.  Referring to Q6, are we supposed to create an external person accounts
  on the CWMS?

  Hello

  Q1: I m unaware of such a feature

  Q2: For 50 users non-system you only have one virtual machine if you do not have PRI. It's a complex answer on the second part of the question let me provide you with a document for you to review.

  http://www.Cisco.com/en/us/docs/collaboration/CWMS/b_planningGuide.PDF

  Search for planing guide.

  Q3: You understand the basic concept of admin/host, but I'd sugguest you were talking to your account team regarding licensing as it should not be a problem for current users "System.*" actually how many users are there.

  Q4: Let me re - search a little more here and get back to you

  Q5: Can you invite by email adresss and he can join form outdoors if you have for IRP in configuration as well.

  Q6: They will be invited by email and can join through PC customer /mobile etc..

  Q7: No, it is not necessary

  If you need help me please do not hesitate to send me an email.

  Thank you

  Srdjan

• WebEX meeting server authentication question

  Hi all

  We have configured the LDAP authentication integration in WebEx. We want to avoid the brute force attack and to minimize the use of the password of the internet domain, are there other methods of authentication?

  If we help to use stand-alone account WebEx, any policy password as complexity, duration and expiration date in WebEx?

  Thank you!!

  Danny

  Hey Danny,

  If you have activated the LDAP authentication and integration with CWMS (via CUCM), then your users profile directory using LDAP credentials to authenticate on CWMS. It is not possible to disable the requirement for active profile users authentication.

  There are two other user accounts on CWMS management methods:

  1. LDAP via SAML 2.0 integration (Single Sign-On), but that you have IIP provider accessible from the internet, would require that authentication would be on this end. You can read more here:

  http://www.Cisco.com/c/en/us/TD/docs/collaboration/CWMS/2_7/Planning_Guide/cwms_b_cwms-planning-system-requirements-2-7/cwms_b_cwms-planning-system-requirements-2-7_chapter_0111.html

  http://www.Cisco.com/c/en/us/TD/docs/collaboration/CWMS/2_7/Administration_Guide/cwms_b_cwms-administration-2-7/cwms_b_cwms-administration-2-7_chapter_01110.html#id_13124

  2. using local profiles CWMS. With local user profiles, user accounts are created manually or by importing of CUCM (you can still have the integration Directory to import profiles of CUCM, but requiring users to use created locally passwords on CWMS (do not enable LDAP authentication)), and passwords are created manually by end users locally on CWMS. Regarding the strengthening of password, you can consult this document:

  http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_7/Administration_Guide/cwms_b_cwms-administration-2-7/cwms_b_cwms-administration-2-7_chapter_01110.html#concept_E2AC8672B23C487887A8AFFAE6C1EBDB

  I hope this helps.

  -Dejan

• I will set up a database, and requires the SMTP E-MAIL SERVER. How can I find it?

  I am setting up a database and it requires that the SMTP E-MAIL SERVER, how do you find it? I am 80 years old and need a bit of help. Thanks, gene

  If you don't want or need to actually send mail through this program, you can put in what you want.  If you are interested in having this program to send mail, you will need to use the SMTP value provided by your e-mail service provider.  Make sure that your program can also handle ports other than port 25 (the standard SMTP port) because many providers of services that you use port 465 or 587.  If they use other ports, they need also usually authentication on the server and the connection encryption.  Unless your database program can do all this, don't bother.

• How can I know my server pop3 etc so I can complete the setting to the top of my windows messaging

  How can I know my server pop3 etc so I can complete the setting to the top of my windows messaging

  E-mail account:

   

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• How to set up the Webscam (under built-in Web server) for scanning

  Hello I have a printer N911n/all-in-one Officejet Pro 8600 Premium, number of product CN577A, OS Win 8, 64 bit, Error Message: you cannot use this function because it has been disabled. For more information, contact your network admin Director or the person who set up the printer. No changes were made to the system other than the s/w updates.

  First of all, please explain what the EWS/Webscan tries to do. Is it possible for me to fix this error message and scan from Webscan somewhere on my computer? Thank you.

  Hello

  You can scan through the Webscan interface once you activate it.

  In the SAP, on the settings tab.

  Under the administrator settings, check the box enable Webscan and press on apply to save the changes.

  The Webscan feature should now active and accessible.

  Shlomi

• How to use WebEx Meeting Center with MX300 G2

  Hi all

  We have telepresence infrastructure following implementation and work:

  -VSC Highway

  -CUCM

  -IM & presence server

  -Telepresence Server

  Can to sign up customers Jabber against Expressway, have put in place all records DNS etc and all this side of things works well.

  We also have our G2 MX300 on Expressway and it can make internal calls to Jabber client etc.

  We are now trying to get the G2 MX300 connected to our WebEx Meeting Center () account, so that we can join the meetings on the G2 MX300 and see the meeting schedule using the 10 "telepresence touchscreen etc..

  Can you please give us a clue on how we get WebEx works on the G2 MX300?

  Thank you very much

  CMR Hyrbid Configuration Guide, Note this requires Cisco Advanced Services or partner Cisco qualified to perform the implementation.

  CMR cloud is just an addon service WebEx Meeting Center.

  Cloud of CMR uses Cisco's TelePresence infrastructure in the cloud to do throughout the Conference, while Hyrbid will use your infrastructure on site.

• I would like to know how to prevent messages sent to be registered on the SMTP server

  Currently, my Thunderbird client saves a copy of all messages sent to the folder "sent", as expected. All sent messages are also stored on the Server SMTP (G-Mail in this case). To avoid having to delete them manually, I want to warn the outgoing message to be stored on the SMTP server in the first place. Currently, my account of Thunderbird for Copies and folders settings has a check mark next to the option 'Other' with a destination of the folder option sent in Thunderbird. I don't see any other parameters that could control how sent SMTP mail server handles. I use the POP service only with the G-Mail Server. What settings should be in place to prevent messages accumulate in the folder "sent" on the SMTP server account?

  I think I can now answer my own question! The question turns out to be a g-mail not delivered not a factor controlled by Thunderbird.

  Apparently g-mail can automatically a copy of all mail sent by SMTP service one account. It's a "feature" that cannot be disabled! A workaround seems to be to set up a filter in g-mail account settings for all mail with an address corresponding to your own email address and send the message to the trash folder. Items in the Recycle Bin are automatically deleted after 30 days. Google prevents the rule 30 days being modified by measure of security, but at least trashed messages for irrevocably removed in a month.

• I can not change / set the smtp password.

  T - bird 24.5.0 running. On Ubuntu 10.04. There seems to be no way to change/set the password. Here is an overview of the screen indicating a change of account: http://k4gvo.com/images/smtp.png I don't see a way to set/change the password and an exhaustive search of the other menus, including the configuration editor has not helped. For some reason, probably because of an automatic update, he ceased to send emails. I manually installed 24 to see if that helped, but it didn't. This profile/account is probably 5 or more years so there is probably something in the profile that is the pipe upwards. I tried to add a new e-mail account so I could put the server by default to it but it won't let me. He went through all the motions, but when I look in the list of accounts, it isn't here.

  I created a new user account on the system and it I would like to create a usable smtp profile without change it however.

  I'd start on if I can save emails, however when I tried to copy the Mail / directories < account > to another user to test, they never came.

  Thank you
  Jim.

  Setting are OK because I used the same settings on a different system and it works fine. Also, using the same user/pw I receive mail fine, just can't send.

  I can connect from the command line: tbird should therefore be able to from the same system, right?
  Telnet Wxxx - xxxxl.com 587
  184.221.22.22 by train...
  Connected to wxx.xxxxl.com.
  [Escape character is ' ^]'.
  220 - sunxxx,xxxoc.com ESMTP Exim 4.82 #2 Saturday, June 7, 2014 15:34:48-0400
  220. we do not allow unsolicited use of this transport system,
  220 or in bulk by email.

  See also picture as an attachment.

• Set up the Scan to email on Mac with HP Officejet Pro 8500 Wireless

  Anyone know how to find the SMTP server information to set up your email inbox out when setting up scan to email on a Mac?

  Hello Rocgood.

  Please check this document.

  http://support.HP.com/us-en/document/c02914043

  Bravo!

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• Set up the scan to E-mail for Officejet Pro 8600

  I'm trying to set up the scan to E-mail for an Officejet Pro 8600. In SAP, I configured the mail server correctly (received confirmation by e-mail). In other posts I found that I need to put in place the profile of outgoing e-mail through the tab on the built-in Web server, but it is not option, nor is it a deposit Email section.

  Also, when I use the HP (on Mac OS Lion) utility and click on the Scan to e-mail setting, I get the Scan start setting Email button. This brings me to the SAP, but the page does not load correctly: there is no instruction whatsoever.

  Someone at - it no clues?

  Ignore that - I realized that the 8600 Pro does not support this feature... only the 8600 ProPlus made.

• BlackBerry 10. impossible to set up the email on Z10

  Hi guys and girls

  Someone at - it the same problem.

  I tried to configure my POP3 for 3 days and now good luck e-mail address.

  I have checked and rechecked my

  Displays the settings and my smtp, port and SSL settings and other impossible settings connected to my e-mail address.

  Also gives me a message saying that my provider seems to not be trust worthy?

  I use the same settings in Outlook 2007 and connects to the email without any problem.

  Is there a problem with Z10 POP function?

  Or?

  I found the problem

  If your POP3 and SMTP does not use the good name of user and password this cuase it does not

  So my problem is that I was that the phone automatically adds the POP3 username for the SMTP Protocol. where the service provider I use do not need that in order to post the causes of the problem

  Example of

  pop setting incoming

  Username: [email protected]

  password: * & * & * & *.

  incomeing mail server: pop3.mail.co.za

  disabled port 110 (ssl)

  (Since im using Vodacom in South Africa)

  Courses

  User name: (blank)

  password: (blank)

  Outbound: smpt.vodamail.co.za

  Port: 25 (encryption smtp disabled)

  and I took the settings.

  Thanks for the help,

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)