Cisco Webex meeting server usually ask Q & A - CWMS

Similar Questions

• WebEX meeting server authentication question

  Hi all

  We have configured the LDAP authentication integration in WebEx. We want to avoid the brute force attack and to minimize the use of the password of the internet domain, are there other methods of authentication?

  If we help to use stand-alone account WebEx, any policy password as complexity, duration and expiration date in WebEx?

  Thank you!!

  Danny

  Hey Danny,

  If you have activated the LDAP authentication and integration with CWMS (via CUCM), then your users profile directory using LDAP credentials to authenticate on CWMS. It is not possible to disable the requirement for active profile users authentication.

  There are two other user accounts on CWMS management methods:

  1. LDAP via SAML 2.0 integration (Single Sign-On), but that you have IIP provider accessible from the internet, would require that authentication would be on this end. You can read more here:

  http://www.Cisco.com/c/en/us/TD/docs/collaboration/CWMS/2_7/Planning_Guide/cwms_b_cwms-planning-system-requirements-2-7/cwms_b_cwms-planning-system-requirements-2-7_chapter_0111.html

  http://www.Cisco.com/c/en/us/TD/docs/collaboration/CWMS/2_7/Administration_Guide/cwms_b_cwms-administration-2-7/cwms_b_cwms-administration-2-7_chapter_01110.html#id_13124

  2. using local profiles CWMS. With local user profiles, user accounts are created manually or by importing of CUCM (you can still have the integration Directory to import profiles of CUCM, but requiring users to use created locally passwords on CWMS (do not enable LDAP authentication)), and passwords are created manually by end users locally on CWMS. Regarding the strengthening of password, you can consult this document:

  http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_7/Administration_Guide/cwms_b_cwms-administration-2-7/cwms_b_cwms-administration-2-7_chapter_01110.html#concept_E2AC8672B23C487887A8AFFAE6C1EBDB

  I hope this helps.

  -Dejan

• WebEx meeting Server 2.0 - setting up the smtp server

  Configuration of SMTP server for the Webex Server 2.0 meeting, the manual States:

  Possibly to enable authentication of mail server, select the server authentication enabled.

  If you enable authentication, enter credentials user name and password required for the system access to the e-mail server of the company.

  System emails are sent by admin @. Make sure that the mail server can recognize this user.

  -What exactly does "ensure that the mail server can recognize this user"?

  • I have to configure the admin @ account on the SMTP server? (customer can configure only e-mail as account [email protected] / * /)
  • Or admin @ is the property of «of» the mail and SMTP server should accept this property 'from'?

  -What happens if the user name and password are not specified?

  Thank you

  Here you have two options:

  (1) either use authentication: you must create a user account in exchange.

  (2) do not use authentication: let disabled authentication and configure exchange to relay emails from CWMS.

  "-What exactly does 'To ensure that the mail server can recognize this user'"?".

  "- What happens if the user name and password are not specified?"

  This means that if you enable authentication - create a user account for CWMS in Exchange. If this isn't the case, then have the exchange server that is configured to relay CWMS emails. Its simple allow only the ip address of CWMS in Exchange to accept and relay e-mail.

  If it does not means that you don't want to receive emails from CWMS and as you know email principal means of CWMS communicate with users.

  Simple way is to leave off authentication and configure the relay. I did this couple of times in the past without problems.

  -Terry

• How to use WebEx Meeting Center with MX300 G2

  Hi all

  We have telepresence infrastructure following implementation and work:

  -VSC Highway

  -CUCM

  -IM & presence server

  -Telepresence Server

  Can to sign up customers Jabber against Expressway, have put in place all records DNS etc and all this side of things works well.

  We also have our G2 MX300 on Expressway and it can make internal calls to Jabber client etc.

  We are now trying to get the G2 MX300 connected to our WebEx Meeting Center () account, so that we can join the meetings on the G2 MX300 and see the meeting schedule using the 10 "telepresence touchscreen etc..

  Can you please give us a clue on how we get WebEx works on the G2 MX300?

  Thank you very much

  CMR Hyrbid Configuration Guide, Note this requires Cisco Advanced Services or partner Cisco qualified to perform the implementation.

  CMR cloud is just an addon service WebEx Meeting Center.

  Cloud of CMR uses Cisco's TelePresence infrastructure in the cloud to do throughout the Conference, while Hyrbid will use your infrastructure on site.

• Problem using Cisco WebEx on Win 7

  I try to use Cisco WebEx to use my home computer to get the files for the school. The meeting is set up at 100%, but whenever I try to access it from my Government computer, I get a saying that an add-on has failed. I tried, but I can't find the add-on responsible and if possible, where to download. The account I have is very, very safe and I'm unable to download a lot of things, so keep that in mind. Spent a lot of time trying to find a Web site that requires no download to use, and this seems to be the best. If there is more better, please let me know.

  < original="" title:="" webex="" from="" a="" government="" computer="">

  Hi Ken,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are facing difficulties in the use of Cisco WebEx on your Windows 7 machine. I will certainly help you get this fixed number.

  I would be grateful if you could help me with more information:

  1. what web browser do you use?

  2. are you having the same problem when downloading the thing as Add-ons?

  If the problem only occurs when you use Cisco WebEx , then I suggest you send or post your query on forum Cisco WebEx. You can also check out the link below

  https://supportforums.Cisco.com/community/5726/conferencing

  Hope this information is useful. Please write back to us for assistance, we will be happy to help you.

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak

• I installed VMware ESXi on my Cisco's UCS server but after that I don't get from CIMC.

  I installed VMware ESXi on my Cisco's UCS server but after that I don't get from CIMC. also, I am unable to ping the address IP of CIMC. Any help?

  I think that MMIC does nothing with your ESXi installation... it is OoB management for servers of the UCS.

  Check your config MMIC inside the BIOS again.

  BR,

  Dragan

• PlayBook &amp; cisco Easy VPN Server 831

  I don't seem to be able to connect to my router 831 cisco easy vpn server is configured by using my Blackberry Playbook.  Looking at the console of the router I can see Debugging but don't know what it means.  I have attached debugging as well as glued my setup, if someone is able to help me at all it would be much appreciated.  Thank you very much.

  Current configuration: 2574 bytes
  !
  version 12.3
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  enable secret 5 $1$ FM71$ y4ejS2icnqX79b9gD92E81
  enable password xxxx
  !
  username privilege 15 password 0 $1$ W1fA CRWS_Ritesh $ o1oSEpa163775446
  username privilege 15 secret 5 shamilton wFLF $1$ $ 8eRxnrrgVHMXXC0bXdEGi1
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  AAA - the id of the joint session
  IP subnet zero
  no ip Routing
  !
  !
  audit of IP notify Journal
  Max-events of po verification IP 100
  No ftp server enable write
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP xauth timeout 15 crypto

  !
  ISAKMP crypto client configuration group ciscogroup
  (deleted) 0 key
  DNS 172.16.60.246 172.16.60.237
  pool SDM_POOL_3
  ACL 100
  Save-password
  include-local-lan
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  crypto dynamic-map SDM_DYNMAP_1 1
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  card crypto SDM_CMAP_1 client authentication list ciscocp_vpn_xauth_ml_1
  map SDM_CMAP_1 isakmp authorization list ciscocp_vpn_group_ml_1 crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
  !
  !
  !
  !
  interface Ethernet0
  IP 172.16.60.241 255.255.255.0
  IP nat inside
  no ip route cache
  !
  interface Ethernet1
  DHCP IP address
  NAT outside IP
  no ip route cache
  automatic duplex
  map SDM_CMAP_1 crypto
  !
  interface FastEthernet1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet2
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet3
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet4
  no ip address
  automatic duplex
  automatic speed
  !
  local IP SDM_POOL_1 172.16.60.190 pool 172.16.60.199
  pool of local SDM_POOL_2 192.168.1.1 IP 192.168.1.100
  local IP SDM_POOL_3 172.16.61.100 pool 172.16.61.150
  IP nat inside source overload map route SDM_RMAP_1 interface Ethernet1
  IP classless
  !
  IP http server
  no ip http secure server
  !
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 172.16.60.0 0.0.0.255
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 172.16.60.0 0.0.0.255 any
  public RO SNMP-server community
  Enable SNMP-Server intercepts ATS
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 120 0
  password xxxxx
  length 0
  !
  max-task-time 5000 Planner
  !
  end

  Stace,

  *Mar  1 06:40:15.258: ISAKMP: transform 1, ESP_AES
  *Mar  1 06:40:15.258: ISAKMP:   attributes in transform:
  *Mar  1 06:40:15.262: ISAKMP:      SA life type in seconds
  *Mar  1 06:40:15.262: ISAKMP:      SA life duration (basic) of 10800
  *Mar  1 06:40:15.262: ISAKMP:      encaps is 61443
  *Mar  1 06:40:15.262: ISAKMP:      key length is 256
  *Mar  1 06:40:15.262: ISAKMP:      authenticator is HMAC-SHA
  *Mar  1 06:40:15.262: ISAKMP (0:14): atts are acceptable.
  *Mar  1 06:40:15.262: ISAKMP (0:14): IPSec policy invalidated proposal
  *Mar  1 06:40:15.262: ISAKMP (0:14): phase 2 SA policy not acceptable! (local 14
  

  The other end offers AES 256 and SHA IPSec transform set.

  While you have configured:

  crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

  Suggestion:

  Add a new set of transofrm and apply it under crypto map.

  HTH,

  Marcin

• WebEx meets the users server management issues

  Hi all

  I have three questions about the management of the user accounts on CWMS.

  (1) cisco document mentions that a creation of password email will be sent to an new added manually to the users, but the document does not mention if a new user imported via cvs file will be sent an email from creation of password or not?

  (2) If a new user has been added to CWMS via LDAP synchronization, CMWS email will inform the user about the creation of the account automatically?

  (3) If a user account has been imported to CWMS via cvs, if on file after LDAP synchronization, the user account will be overrided or the user account will be duplicated?

  Thank you

  Danny

  Hey Danny,

  Let me answer your questions:

  (1) Yes. Accounts imported via CSV when you use local user (without integration of directory or SSO) accounts marked as active during the import will get a "required Action: create a password for your new account" e-mail system.

  (2) only if you enable LDAP authentication you can configure notifications about creating an account that will be sent. You can configure to be automatic by checking the 'send notifications automatically", or you can manually click the"Learn more now"to inform all users imported from the creation of the account.

  (3) if the e-mail address of the account is the same locally on CUCM, the account will not be substituted. If an e-mail address is different, a new account will be created while the account is disabled.

  I hope this helps.

  -Dejan

• Server Blade asking reboot or insertion of media.

  We have suffered the loss of power and are now problems bringing our servers online. What is the best path to take when the server asks me to restart or insert media? Thanks for any help!

  Hello

  It seems that you start from the SAN and your coming UCS before storage or SAN. Just restart the servers still once, after you make sure that your storage and san work well.

  If anything I have said not to make sense to you, please check your configuration of startup strategy.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011101.html#task_1F7624A2A07B48459AB57B9593D98E84

  Richard

• Update | Migration - Cisco TelePresence Content Server

  Hello...

  I have a physical camera TCS M2, I would like to upgrade to the latest version 7. XX verified but it is apparently not possible to perform this procedure for the unit of these versions. What are my options? Is there a version compatible with the model of this device? My solution would be virtualization? Can someone help me with a possible solution?

  Best regards...

  You mention that you're running a TCS M2, which is a second generation aircraft, non - UCS Server?  If so and you want to stay on this material, you can run TCS S6.1 up to S6.2.1 as a virtual machine on that server.

  TCS S6.2.1 Release Notes

  TCS S6.2 VM Installation Guide

  If you plan on TCS S7.x running, you must migrate the TCS to the virtual device, you can run it either on a third generation or fourth generation TCS device or third spec-server meets the minimum requirements.

  TCS S7.2 Release Notes

  TCS S7.1 VM Installation Guide for existing customers

  If you need more information or help, suggest that you move your thread to the telepresence of forums where these devices are most active section discussed.

• Speech for Cisco Unity 7 server

  I'm currently developing a speech recognition server for use with Cisco Unity 7 to provide functions of voice command for callers/users.

  From what I've read that the server can be deployed on the server Cisco Unity itself either as a standalone.  What is the most common and recommended option?

  If it is a stand-alone server, I guess that it must also be a member of the AD domain server?

  Thank you in advance!

  -rya

  Speech recognition is used only when subscribers dial to interact with the voicemail system (check voicemail and options to the breast). It does not allow external callers to interact with managers to call.

  Now you're talking about which allows outside callers can call and tell a person's name and may be transferred to that person.

  This is done by another product called 'speech Connect'. This would be installed on a separate server.

  http://www.Cisco.com/en/us/partner/prod/collateral/voicesw/ps6789/ps5745/ps2237/prod_data_sheet0900aecd806ed7c9.html

  This product is also included with Connection "unit".

  http://www.Cisco.com/en/us/partner/products/ps10670/index.html

  I hope that these links will work for you. Let me know if you have a problem.

  Scott

• Configuration of Cisco CUCM TFTP server

  Hello

  I currently have a publishing server and it subscribed two (v 6.1.3), I have now gone on 1250 magical devices where Cisco recommends a self-contained TFTP server.

  I understand to deploy it that I need to add it to the Publisher as a server and activate it then once upwards and running the Cisco TFTP service, then update the 150 Option address in my DHCP to the new TFTP server scope.

  A few questions, the TFTP server need the following installed at the same level as the Publisher/subscribers:

  • Dial plans
  • Unit packs
  • Regional settings

  Thank you and all other comments appreciated.

  Hi Ian,

  -By the architecture, the TFTP server would be pushing it to load the firmware and on phones - so you would need your packages of the device, containing all of the load firmware, to be on your server TFTP autonomous.

  -locale install files that phones Gets the TFTP server, such as their dictionary - so you'd need local on the standalone TFTP server

  -Dial plans are files used by the binary file of CCM. If you don't ever plan on the performance of the service of the CCM on the server, you don't need to install the dial on this server plans.  However, as far as practice, it is good to have dial plans, local and device packs downloaded on this standalone TFTP server, where server roles have been adjusted at a later stage in time.

  -Sriram

  Please note the useful messages!

• Cisco IOS DHCP Server + classless static routes on DHCP clients

  Hi, I tried to find if it is possible to add the ability for static routes to DHCP clients on the Cisco IOS DHCP configuration mode. I'm looking to add a parameters as defined in RFC 3442, like this one, located on the ISC DHCPd server:

  Global settings:

  121 = integer table 8 code option rfc3442-classless-static-routes;

  ms-classless-static-routes option code 249 = integer table 8;

  And for the subnet declaration:

  option rfc3442-classless-static-routes 24, 192, 168, 30, 192, 168, 10, 1;

  option 24 ms-classless-static-routes, 192, 168, 30, 92, 168, 10, 1;

  Is this possible?

  Thank you!

  Vitor

  Yes, the fun part it is to convert it into a format IOS will accept.  You can try:

  IP dhcp pool 0

  option 121 24.192.168.30 ip 192.168.10.1

  option 249 ip 24.192.168.30 92.168.10.1

  If this does not work, change the "intellectual property" for "hex" and each of your decimal byte converted to hexadecimal.

• Unable to connect to the Cisco webex. It is said 'ActiveTouch général' plugin broke down. Please advice

  I was able to connect to Cisco before. Today all of a sudden, I get this message from the plugin crash. I have even tired of reloading the page, but nothing helped.

  If you use the version of ESR Firefox 17.0.11 (help > subject) then you can upgrade to the current version of Firefox 24.3.0 ESR.

  • http://www.Mozilla.org/en-us/Firefox/organizations/all.html