WebHelp and aid on the ground

Similar Questions

• Damage to be wet and slammed on the ground.

  Someone tried to destroy my corei3 Dell computer laptop windows 7 by pouring water on her and then she slamming on the ground. It is dry most of the time, and it works. Except the upper left corner is all destorted and you can not see the functions until then it is to say-go back and go before fetures, toolbar and address. Is - fixable? And here, is it possible that I can do the current window smaller and in the center of the page so that I can see and use these fetures? Help, please!

  Hello

  -Have you tried to minimize the window of internet explore?

  The following links and see if it helps.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

  If the problem persists, I suggest you to contact Dell for assistance on this issue.

  http://support.Dell.com/support/topics/global.aspx/support/hardware/hardware_portal?c=us&CS=19&l=en&s=DHS& ~ CK = anavml

  Let us know if it helps!

• Pop - ups of WebHelp and blocker of the end-user

  Hi all, I searched the forums and help online, but can't find any info on this. I have the following questions regarding security and pop-up blocker my end user:
  
  If the user has the blocker enabled, it blocks Webhelp pop ups?
  If so, the blocker will block also see the button pop ups?
  In addition, if the pop-up Blocker is enabled and it blocks pop-ups of Webhelp, having the user to add my Web site to the trusted list would allow pop-ups?
  Can you think of any other "security question" of the end user I need to study that I see my help?
  
  Thank you!
  want2bewiser

  Welcome to the forum.

  Blockers cannot block webhelp popups because they are user initiated when they click on a link. My understanding is that blockers are designed to prevent the unwanted popup windows.

  I think that the other main issue is to ensure webhelp is the type of assistance, it will be run from a server rather than be installed on PC users.

• Accuracy of the PXI-4110 and aid for the supply of the sweep of the voltage-2, 5V to 2, 5V

  Hello

  I want to know about the accuracy of PXI 4110 DC power. I use 4110 PXI to apply a voltage sweep-2, 5V to 2, 5V with a 0, 5V step using Labview, how can I do?

  Hi Khan,

  After reading my post, I realized I'd probably be a bit clearer on that last paragraph...

  Available for PXI-4110 voltage ranges are different for each channel, as shown in the first page of the specifications:

  CH0: 0 to + 6V

  CH1: 0 to + 20 v

  CH2: 0 - 20V

  So to create a sweep from-2.5 to 2.5 V, you will need to use multiple channels. You would use Ch2 to sweep from-2.5 to 0V. Then you can use Ch0 and Ch1 (Ch0 would be better since you'll have better accuracy) to sweep from 0 to + 2, 5V. There is a good example, called "NOR-DCPower channel in software timing Sweep (curve) .vi tension" which does almost exactly what you are looking for.

  I hope that clarifies the it!

  Chris G

• Need toughts on this Web site and aid in the iframe and the formatting of the text

  Hello world

  I m new to Muse and decided to give it a try and make a website for a business. Want to know your opinion about it and maybe ask to help you concerning the loading time of the tumblr blog embedded in an iframe in the blog section and formatting of text in the mobile view of the Web site. The owner of the site also want to manage, add links pdf by downloading by itself, it is something I could do? any ideas?

  Link: home page

  Thank you very much

  Richard

  I had a quick glance at your Web site, and it looks great to me. For a person who is new to Muse, you did a remarkable job.

  The blog loaded fine for me, but I'm on an Internet connection broadband and you can hear other people on the forum about their experience.

• How to make text read-only once it is recorded and distributed on the ground?

  How to make a read-only text field after it is registered adistributed d?

  LiveCycle Designer ARE 8.2

  Exit this JavaScript code on the event:

  textField1.access = "readOnly";

  This works after the user loses the focus on the field, but after it is saved and distributed, this field is no longer "read only".

  I need to have staff insert information into a text field and try it then distribute to clients, and these fields must be protected.

  How do you do that?

  No... .it has to be there to be a schema valid... but it is not used by the product offline.

  Paul

• I just bought a new laptop, the day of set-aside accidentally bump my classmate in my camera and it fell to the ground, got brocken screen, what will I do?

  I just bought a new laptop, mac pro 13 Inc. with retina book model no A1502, exactly on the day set-aside, it broke because my classmate accidentally jostled and he fell to the ground, the screen had a crack, I went to the store to ask for help, they just said to buy a new I felt so bad, what should I do?

  There should be a possibility outside replacement in the event of accidental damage warranty. Go to this store and ask them if there is any chance to get out of warranty repair.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Is it possible to pair my iPhone with my car stereo and my hearing aids at the same time.

  Is it possible to pair my iPhone with my car stereo and tooth blue hearing aids at the same time.

  I've never been able to 2 bluetooth devices at the same time work with the phone

  If it is coupled with my car and then he throws the bluetooth headset and vice versa

  Not sure, there is a way to allow both

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• "settings" option on the ground ' and 'frame mix' now, the movement is stuffy!

  Hello! "I messed with settings" option on the ground "and"frame blend"try to improve image quality already very low - and now plays and export stiff/jerky movement... !! For any help or suggestion would be appreciated! does anyone know how to return back or increase the fluidity in movement smooth - it's too late to cancel...  Mixture of framework does not work!  Thank you!!!  Cally

  To go back, you can use a backup or a registered copy.

  Mixture of frame on the timeline is only useful when the framerate of the element does not match that of the timeline.

• Bulleted and numbered lists cart returns not the same size with WebHelp and rendering PDF

  I have RH 8.0 HTML

  I created a new project.

  I created a topic with the default style sheet applied.

  I created a numbered list with a few points to secondary chips by numbered line.

  Screenshot Source HR

  

  When HR generates for WebHelp and as printed PDF output, the distance between returns trolley lines seems to be about two times more white space between items in the PDF document compared to the generated document WebHelp displayed via IE 7.

  Screenshot of WebHelp after generation by top of the source:

  

  Screenshot PDF after generation by top of the source:

  

  Someone has an idea what is the cause?  I'd be willing to believe she had something to do with the way I had things in my stylesheet configured, but it is using the default.css.

  I can send the project if necessary because it contains nothing of any value.

  There will always be a difference between the way in which the display lists in the browser and in the press, because different browsers may very well have differences.

  When you create a PDF file, behind the scenes a Word document is created, then PDF would be and ransacked. Word lists will be different.

  The options are to accept the difference, as long as both are acceptable or generate term first, that twist and then PDF.

  It has more on this subject in my pages of printed documents. RH8 also lets you specify a CSS different when the production of printed materials and use may allow you to play with the definitions to get what you want.

  See www.grainge.org for creating tips and RoboHelp

• Fell on the ground and do not work

  Nice day...

  I have laptop HP Pavilion m6-1060ee, product: B6H83EA #ABV, S/N: [personal information deleted].

  At the end of my work day, I put the laptop in the bag, and he fell to the floor of 90 cm high (3f), when I strted it again once the power and HARD drive work but the message (press ESC to start... Menu) are not, and collapsed in this place, on the other hand, the screen not broken I wait a while, but there is no respownding...

  You please tell me what is the problem?, and what do I do about it?

  It seems that the laptop still has internal components in place. It could be a corrupted hard drive (it can still run, but the heads may be damaged or out of alignment). I can suggest two things to do.

  First, see if you can get to the BIOS and see if the HD is listed. Some BIOS have a util. HD test see if who will run.

  Second, get a live linux DVD (I use Linux Mint cinnamon) and when you start the laptop, press the function key (on my old dv9700 is a F9) select the DVD drive and see if the machine will start with the live DVD. NOTE: you need more time, then you are use to because it runs on the DVD player. If it works, your hard drive is damaged.

  Vinny

• How to set the filter criteria for the month and the year to aid in the timestamp input field?

  Hello

  I use jdev 11.1.2.3.

  I have a problem with the generation of reports, I have a report table that is in the form of VO (query based) and I want to search this table in the month and year of the basic

  but in this table (query) This timestamp field of having value based on... How to do a search with the name of the month and year only... Here I totally use vo base query to generate a

  reports... Anyone can guide me.

  Thank you.

  I want to create a drop-down list for month + year as an executable parameters with bind variable no matter what idea this subject, my attribute here is TimestampFormat.

  Then add to your sql query something like:

  WHERE extract (your_timestamp_column MONTHS) =: monthBindVar

  OR an extract (YEAR your_timestamp_column) =: yearBindVar

  and add monthBindVar and yearBindVar as a bind variable to your view object.

  Then you can use it as a ExecuteWithParams operation (or manually set these bind variables and execute the query)

  Dario

• What is the best way to deliver the WebHelp output files to the development team in TFS?

  I use RoboHelp 2015 to generate WebHelp output.

  The development team want me to archive files in TFS so that they can pick up the files and integrate them into the build.

  I'm looking for some best practices here because I'm running into some issues whenever I try to check the files back in. For example, I need to manually track the files I added/renamed/deleted in the HR project.

  We discussed the following options:

  • Delete the contents of the WebHelp output folder in TFS whenever I want to check in new files.
    • This works, but doesn't seem to be a very elegant option.
  • Zip the contents of the folder of WebHelp output and archiving/retrieval of this file
    • This works well for me, but the devs have create a separate process to unzip the file whenever they generate a release, they don't care.
  • Check all files in the folder, overwrite the files with the new files, manually add the new files and then check back in.
    • This job very well, but it requires you to manually add the files whenever you check in and also leaves / the legacy of old who were removed from the HR project.

  Someone at - it other ideas about how to do this?

  Any help would be appreciated.

  James

  Hello Mack,

  I think that the decompression of a file is a very simple action to add to a build process, it is perhaps the best way to go. But there are other options as well.

  You can check in sources in TFS and use RoboHelp with source code control. Then you include RoboHelp in the build process so that the latest sources are retrieved from TFS and aid is generated on the server. A nice solution, but still work to implement. I like this solution because I do not store an output is very useful. As long as you have the sources, you can always create new output.

  For developers, it is easier to just add all the files output in a specific folder. And you can automate this option for yourself as well. The TFS and RoboHelp can remotely control from the command line. Meaning that you can create a batch (1) file generates output from RoboHelp. (2) deletes the current aid of TFS. (3) add the new output 1 to TFS. (4) checks in changes in TFS. A single file can automate everything for you. I have used this method in the past, and once it is implemented, there is virtually no maintenance for you.