WebLogic myrealm: problem with AD provider

Similar Questions

• Internet Explorer cannot display the Web page: diagnose says: problem with winsock provider catalog

  I am unable to access any internet site. I get a page that says Internet Explorer can not display the webpage with an option to diagnose connection problems button. When I run that a window is titled "for windows XP Network Diagnostics. He says that windows has detected a problem with the winsock provider catalog on this computer. It offers to reset the catalog to the default configuration and restart. When I do this it does not correct the problem. What other +.

  Hello verncan,

  Since you are getting the error Windows has detected a problem with the catalogue of the Winsock provider on your computer, follow the instructions below to reset the Winsock.
  Click on "Start" and type "CMD" in the search box. Press the 'Ctrl', 'Shift', and 'Enter' keys simultaneously. This action opens a Windows command with administrative privileges prompt.
  Click 'Yes' to dialogue permission screen and opens the Windows command prompt. You should also see 'Administrator' at the top of the window.
  Type "netsh winsock reset" next "C:\Windows\System32" and press the Enter"" key.
  Restart your computer after you see the message "Winsock catalog reset successfully."

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Problem with a provided calculations.

  I can't get the provided calculations to work for fields: #11total, #13total and #16total. They work for the fields that I've used for over these fields, but not for these three fields, specifically. Can anyone my say and offer suggestions on how to correct the problem? I'm not sure that hot to upload to the forum, the file uploaded in the menu bar option doesn't seem to work for me.

  Thank you

  -Shane

  Work your way through each field and observe what happens to the entire form.

  If I fill in line 1 totals are working on line 11. Enter 1 for line 12 and line 13 does not update. If I rename the fields on line 11, 12 and 13, line 13 calculates. It goes the same for lines 14, 15 and 16.

  I see some domain names also have areas that also could cause a problem.

• Problem with the winsock provider catalog error wireless online?

  I have an aspireone by Acer with Windows XP Edition version 2002 service Pack 3 family. When I try to go on wireless internet with internet Explorer 7, I get the error 'problem with winsock provider catalog '. I did the reset thing and it still gets the same error. Anyone has a suggestion to get this pc online?

  I have an aspireone by Acer with Windows XP Edition version 2002 service Pack 3 family. When I try to go on wireless internet with internet Explorer 7, I get the error 'problem with winsock provider catalog '. I did the reset thing and it still gets the same error. Anyone has a suggestion to get this pc online?

  Note the devices installed in the machine.  Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)

  Uninstall the software/drivers for network devices.  Turn it back on.  Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.

  Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working...  Note all errors and post them here.

  netsh winsock reset catalog
  ipconfig / renew
  ipconfig/flushdns
  ARP d *.
  nbtstat - RR

• NEW PAP2T-NA: having problems with call with a VOIP provider, but not another

  What I discovered, that's the problem, if the incoming call is answered, then after the end of the call, she can immediately accept a new call; Otherwise, if the incoming call is not answered, and then after the caller hangs up, the ring on the phone to the ATA will continue for a few seconds, and even after the stop of the ring, dial the number will get a busy signal. This State (gettting busy tone) will last more than a few minutes, before it can accept another call again.

  I tested the same line with another VOIP provider and no problem with this provider.

  Is that mean that the problem is with the first VOIP provider? What could be the cause?

  Thanks in advance.

  Finally confirmed that there is a problem with the VOIP provider. The problem has been solved now. This solution requires some setting side PennyTel (VOIP provider).

• Problems with the password Windows Mail 0x800CCC17

  Separated from this thread.

  Original title:

  Problems with Windows Mail password

  Have the same problem with the provider of the internet called Ox800CCC17 error message and they me returned to microsoft that might fix it isn't fast, but couldn't for $99 serv.  So, I always read... Cannot get rid of the paper in the box username and password... frustrating.  Help someone else?

  Hey Joe,

  Sorry for the delay in response.

  You can refer to:

  https://support.Microsoft.com/kb/942495?WA=wsignin1.0

  Try to reconfigure your Mail account;

  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-email/how-can-i-resolve-machine-configuration-issues-in/7462aa67-6131-4504-A11b-7060a95c694b

  I hope this helps.

• Problem with Integrated Weblogic Server in JDeveloper

  Hello

  I use JDeveloper version: 11.1.1.7

  I am facing problem with the Weblogic Server integrated into JDeveloper.

  When I start the server, the log shows as follows:

  Using the 7101 port *.

  D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd

  [waiting for the server to complete its initialization...]

  .

  .

  Memory of JAVA arguments: - Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m

  .

  Start mode of WLS = development

  .

  CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_ 1/lib/Ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\ fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar

  .

  PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin; C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ ADE\bin; C:\Windows\System32; C:\Windows; C:\windows\System32\Wbem; C:\windows\System32\WindowsPowerShell\v1.0\; C:\Program Widcomm logiciels\. C:\Program Widcomm Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin. C:\Program Files (x 86) \Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8

  .

  ***************************************************

  * To start WebLogic Server, use a username and *.

  * password assigned to an administrator-level user.  For *.

  * server administration, using the WebLogic Server *.

  * the http://hostname:port\console console *.

  ***************************************************

  from weblogic with the Java version:

  Java version "1.6.0_51".

  Java (TM) SE Runtime Environment (build 1.6.0_51 - b31)

  Java for 64-bit Server VM (build 20, 51 - b02, mixed mode)

  WLS starting with line:

  "D:\Java\JDK16~1.0_5\bin\java-client-Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy - agentlib: jdwp = transport = dt_socket, server = o, address =-Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks 49879 - Dhttp.proxyHost = www-proxy.idc.oracle.com-Dhttp.proxyPort=80"-Dhttp.nonProxyHosts = localhost | 127.0.0.1 | rnaguban - in '-Dhttps.proxyHost = www-proxy.idc.oracle.com-Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts = localhost | 127.0.0.1 | rnaguban -»-Doracle.jdeveloper.adrs=true-Dweblogic.nodemanager.ServiceEnabled=true-Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM-Dweblogic.log.Log4jLoggingEnabled_uim=true-Dlog4j.configuration_ = UIM loggingconfig.xml-Duim.logging.watchdog.timer=5000-Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp-Dweblogic.management.discover.retries=6-DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig-Dsun.lang.ClassLoader.allowArraySyntax=true - XX : - UseSSE42Intrinsics - DUSE_JAAS = faux - Djps.policystore.hybrid.mode=false-Djps.combiner.optimize.lazyeval=true-Djps.combiner.optimize=true-Djps.authz=ACC - Xverify : aucun-da-Dplatform.home=D:\fmwps6\WLSERV~1.3-Dwls.home=D:\fmwps6\WLSERV~1.3\server-Dweblogic.home=D:\fmwps6\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=D:\fmwps6\ORACLE~1-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~ 1.93\DEFAUL ~ 1- Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=D:\fmwps6\ JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\ tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server

  Listening to dt_socket to address transport: 49879

  The debugger is connected to the local process.

  < 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 16 August 2013 19:19:44 IST > < Info > < WebLogicServer > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 20, 51 - b02 Sun Microsystems Inc. >

  < 16 August 2013 19:19:44 IST > < Info > < management > < BEA-141107 > < Version: WebLogic Server temporary fix for BUG13114768 Sat Jan 21 16:14:44 IST 2012

  WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >

  < 16 August 2013 19:19:47 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 16 August 2013 19:19:47 IST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >

  < 16 August 2013 19:19:47 IST > < opinion > < Log Management > < BEA-170019 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >

  < 16 August 2013 19:19:56 IST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log. >

  August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info

  INFO: Sent Notification of mapping object config reloaded

  August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info

  INFO: Sent Notification of mapping object config reloaded

  < 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 16 August 2013 19:20:20 IST > < WARNING > < JDBC > < BEA-001552 > < data source for logging last resource (LLR) InventoryTxDataSource does not work when it is a participant in a global transaction that spans several WebLogic Server instances because JDBC remote support is disabled. LLR will work in one configurations. >

  < 16 August 2013 19:20:22 IST > < WARNING > < JDBC > < BEA-001110 > < no table test didn't put in place for the pool "SDM-commsRepository" Connections will be tested. >

  < 16 August 2013 19:20:39 IST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 16 August 2013 19:20:58 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the application UIMCMWSAdapter is not versioned. >

  < 16 August 2013 19:21:11 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the oracle.communications.inventory application is not versioned. >

  < TableBuilder > < _buildSchema > metric "webcache:request_filter_denied_stats" table has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Information ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Performance ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Response ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Servlet_Response ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Remote_Bridge_Elements ' has no key column.  It will not be seen.

  < ConfigurationUtil > < getProperties > was not able to load runtime - poms.properties

  < 16 August 2013 19:21:52 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login www.terracotta.org/80 now.

  java.net.UnknownHostException: www-proxy.idc.oracle.com

  at java.net.Inet6AddressImpl.lookupAllHostAddr (Native Method)

  in java.net.InetAddress$ 1.lookupAllHostAddr(InetAddress.java:876)

  at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)

  at java.net.InetAddress.getAllByName0(InetAddress.java:1180)

  at java.net.InetAddress.getAllByName(InetAddress.java:1110)

  Truncated. check the log file full stacktrace

  >

  < 16 August 2013 19:21:53 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login svn.terracotta.org/80 now.

  java.net.UnknownHostException: www-proxy.idc.oracle.com

  at java.net.InetAddress.getAllByName0(InetAddress.java:1184)

  at java.net.InetAddress.getAllByName(InetAddress.java:1110)

  at java.net.InetAddress.getAllByName(InetAddress.java:1046)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)

  Truncated. check the log file full stacktrace

  >

  < LoggerHelper > < Journal > cannot map non-serializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.

  < AdfDiagnosticsJarsVersionDumpImpl > < dumpVersionInfo > version jars discharge path: D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv

  < FeatureUtils > < _resolveFeatures > Ignoring feature-dependency on the function "AdfDvtCommon".  There is no such feature.

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 223

  < 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >

  < 16 August 2013 19:22:08 IST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 16 August 2013 19:22:09 IST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 14.96.8.250:7101 for iiop, t3, ldap, snmp, http protocols. >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  But it does not list the server while deploying the application.

  I don't see the problem to my office network. But I have this problem when I work from my home.

  Ideally, it should show the following lines after the server is started:

  DefaultServer startup time: 195467 ms.

  DefaultServer began.

  This is not the case if I start the server without network.

  How can I solve this problem?

  Thank you

  Ravi

  I see some message on a proxy. Have you checked that you can use the proxy on your network?

  If this isn't the case, you must disable the proxy.

  Timo

• Problem with implementation of Weblogic 10.3 after the change of username password

  I am facing problem with bringing Weblogic 10.3 after the change of username password in the field of safety Madhok, basically, I have deleted the user weblogic default and set m, y custome own user and provide credentials in the server start tab. When I try to bring up the administrator of the server it is, but managed servers fail from the administration console and I see security credentials for authentication error in newspapers? Why who would consider that the server administrator is able to provide the same credentials.
  
  Priya - malgouyres
  Systems architect
  InterAlliance Group Services
  http://www.interalliancegroup.com

  We had the similar problem in the past, our problem is:
  Problem:
  We have removed weblogic default security domain user and create a new user when Manager nodes and managed servers declined. When we try to put in place managed servers after the starting node Manager we continue get refused authentication errors.

  Solution:
  Recreate the user weblogic now try and implement servers managed from the command line using weblogic user. Once they are up to tap them down and bring them to the top again with the new user you created and it will work

  Reason:
  The 10.3-managed servers seems to store the local credentials he managed ldap or cache servers. When you start managed servers don't know the new information of identification and authentication performed against the old values of credentials stored, where they fail. Once they are started with the information identification old they communicate with the admin servers to sync it hides with admin servers and new identification information is updated and then you can restart the servers managed with the new credentials.
  Note: Sometimes after reboot you can meet the problem as the synchronization with the administration server process is asynchornous, weblogic prints a line saying something like asynchronous operation with the null Server address. If the line is printed sync has arrived and you're good. In case you do not see the line to reboot once again and you will see the line after which you can restart with the new credentials.

• + 011 phone calls indicating that I have serious problems with my computer and that they provide a service of Microsoft solve problems

  original title: + 011 phone calls

  I just got a phone call from + 011 indicating that I have serious problems with my computer and they provide a Microsoft service problems. It sounds like a crowded call center and they can tell me their name and they tried to set up a remote entry on my computer. That's when I hung up. Is - this legitimate because what it really looked like a trick.

  Not legitimate... do not answer the call... Mike Hall MVP - Windows Expert: consumer http://msmvps.com/blogs/mikehall/

• 1721.there error is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

  Hello!
  I tried to install a copy of Symantec Corporate Edition Antivirus software but despite several attempts the software could not be installed in Windows 7 Home Basic Edition version but get error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. "
  Could someone help me out here.
  Thank you

  Hello CBhaskar,

  Thanks for posting on the Microsoft answers Forum.

  If the information of Gokul has not helped to solve your problem, then I suggest that you use the Windows Installer Cleanup tool.
  There may be a corrupt installation, you need to delete everything first.
  Click here for a link to download the utility from Microsoft.

  You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error: "there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider staff or the support package' when trying to install iTunes on Windows 7

  Original title: DLL required for uninstall and install iTunes?
  I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

  I can't install and uninstall iTunes no matter what I do. Help, please!

   
  Hi stjimmy9999,
   
  1. are you able to install other programs on the computer?
  2. what version of iTunes you are trying to install?
  3. have you SpyCatcher program installed on the computer?
   
  Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.
   
  Try these steps and check the result.
  Step 1: Download the latest version of iTunes
  a. visit http://www.apple.com/itunes/download/
  b. click on 'Download Now' and save the file to the desktop.
   
  Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
  d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
  e. click ok to apply the changes.
  f. open the file and install it.
  g. Article, follow "step 7: reset the computer to start as usual.
   
  For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for Windows
  For further assistance with this, please ask a question about iTunes Forum

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• Problem with db/server connection in a cluster on the WebLogic application server configuration

  Hi all,

  Maybe someone here has already encountered this problem. I want to deploy and run my application on a cluster (with 2 servers) on WebLogic configuration. All data sources appear to be configured correctly, the application is deployed correctly and that it works correctly, except when a sql query is taken to a specific java class (DataGridService) that handles the results grid search.

  It displays the following error:

  MDatagrid: query: select * xxxxxx WHERE (xxxx) {'success': false, 'id': messageType '',' ': "ERROR", "messageFunction": "Sql Error", 'messageDescription' ': 'java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1211_WLStub cannot be cast to oracle.jdbc.OracleConnection',' iconMessage":"Ext.MessageBox.ERROR","buttonMessage":"Ext.MessageBox.OK","msgTitle":"System Error!"}

  As I said, all sources of data in the console of wl appear to be correctly configured with the option "Not packaged data items of Type" not selected. All other connection db work correctly but there is a problem only with this particular class and with the cluster configuration, in fact it works correctly on a stitching configuration. In this case, the same problem occurs if 'Objects of Type data not packaged' is selected.

  Maybe there is a problem with a certain configuration of wl. Can someone help us?

  We have just solved the problem: in the properties file, wls.context parameter, we forgot to insert the ip for all servers in the cluster

  for example, cluster with 2 servers

  bad: wls.context=t3://ip-address:7001 (this is the only server admin)

  correct: wls.context=t3://ip address: 7001,ip address: 7002,ip address: 7003 (admin server, Server1 Server2)

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.