WebLogic version 9.2 - change Port number

Similar Questions

• vmWare Horizon Workspace - change port number

  Hi guys,.

  I installed the workspace vmware horizon as a proof of concept, everything works fine. I'm now doing the public gateway. The problem which is the port number (443) that uses the bridge can be put on the public because he is facing some of our other things. I wonder since everything is installed and working properly, what would be the proper way to change the GATEWAY port number?

  Thank you

  Unfortunately, in 1.0, we do not allow change the port number.

  Will you be able to move to 1.5? Then, allow us to change the COMPLETE domain name and port.

• change port number for the mobile server after installation

  Jin
  I use windows 2003 server release 2, Server Oracle 11 g R2 and oracle database lite 10g R3. I installed successfully the mobile server with port 80, but when I start the mobile server I get an error message indicating that port 80 is already in use. Now, I need to change the port number of the mobile server. can someone tell me the solution.

  If the Oracle Lite installation type is INDEPENDENT, then to change the port number of Olite in any other available free port number, you must edit the file by default-web - site.xml or site.xml - web-http file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.

  You can at any time change the port in the file http web - site.xml and bounce services, the new port will take effect.

• Change the port number of the IOM servers

  How do I change port number of servers IOM to 14000 to some other port after installation/configuration and use of the server for more than a year.

  Connect to the weblogic console and stop the server instance managed IOM. Select the IOM server instance and change the port. Start it up again, then EM to change all internal references to the new port. Also change any other application integrated to reflect the change of port.

• How to change the number of default weblogic Portal port

  Hi all, I would like to change the number of port weblogic portal server by default to 80 in order to test.
  
  (1) can I change like that
  (2) in the affirmative, please let me know how to do this.
  
  I went to the file config.xml and search 7001, not able to find something with this number, able to see 7002. (The SSL port).
  
  Please put some light on this.
  
  Thank you very much
  Peter.

  Hi Peter
  1. Yes, you can change the default port 7001 to something else.

  2. If you have default Port 7001, it will not appear in the config.xml file. There are NO labels. So yes, when you searched 7001 you find IT. If you change the default port, you will have entered as shown below. If you change the default port, these port tags are shown in the config.xml file.

  3. stop the servers. Make a backup of the config.xml file. Within the tag xml from the server, as shown below, add these 2 labels carefully. Save the config.xml file. Restart the server. NOW, this means that your administration console is running on Port 80.
  80
  true

  Example of file config.xml with the default port changed to 80

  
  AdminServer
  
  AdminServer
  true
  demoidentity
  {3DES} qxEhrfmANIITdpvPld0Uvk5i/rPNDAmZ
  
  80
  true
  ...
  ...

  NOTE: You can also change of administration Console. Choose your thinking, the servers and the AdminServer. In the main, first tab and then click on lock and change change the default port 7001 to 80. Record. Click Activate. Immedialtey you will get errror Page not found. Because the url is still having 7001. You manually change the port of the url to 80. You will again see console. If I prefer, stop the server. Edit the config.xml file. Restart the server.

  HTH
  Ravi Jegga

• Need to change the com port number, but users do not have administrator rights

  Our users don't have administrator rights, however, there are a few pieces of software that communicates with the hardware using COM ports.  Since they don't have administrator rights, you may not click on advanced in the communications port to set the port to the necessary com com.

  I found reg hacks online that say will open the advanced screen to allow the com to be changed, but none that I've found work successfully.

  Can someone tell me the correct registry setting that I need to grant permission to in order to open the advanced under properties tro communications button and have the available com port number to change.

  Thanks in advance.

  Hello

  You have the computer connected to a network or domain?

  It is not possible to access advanced screen or advanced without administrator rights. I suggest you to contact the administrator of the system to help about it.

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• How do you change the port number for Apex listener V2?

  I run listener Apex V2 in stand-alone mode on Linux.  I want to change the port number of the listener apex V2 (e.g. 80 to 8080).  How I do that without having to re - install the new listener?

  Thanks in advance

  PaulP

  Hi PPlatt,

  You can change your_listener_home_directory/apex/apex.properties

  http.port = 8080

  Stop & restart receiver.

  HTH

  Zack

• I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  What do you mean by "port number"? HTTP port (usually 8080), or listening port (normally 1521)?

  To change the name of the service, you can use (as a DBA or SYSDBA)

  SQL > alter system set service_name = '';

• What command to change the number of ports for vSwitch0?

  I develop kickstart to deploy ESX4 U1 to upgrade our 100 ESX 3.5 servers. After trying for a day, I had almost all of this work. The problem is vSwitch0 is created with only 32 ports. Can I use vi client to change the port number after, but it is nice to have everything using kickstart.

  Y at - it a command to change the number of ports for vSwitch0? I know that you can create a new vswitch port num vSwitch, but not for vSwitch0 created during installation.

  For those using pxe and start problem with no. cos NIC added by the user, it is not a real error message, press Alt + F1 to display the actual error message, it should tell you what the problem is.

  Thank you

  I have it in my postconfig:

  Perl-pi-e w /------/ NET/vswitch\/child\ [0000\] \/numPorts = \"\d+\"/\/net\/vswitch\/child\[0000\]\/numPorts = \"256\"/g;' /etc/vmware/esx.conf

  Ben

• Change the number in port idcAdminService

  Hello
  I use 10gR 3. I want to change the adminserver port number. I changed the config.cfg for entry IdcAdminServerPort as IdcAdminServerPort = 6660.
  After the restart of the instance of the server admin his attempts always to connect to the default port number 4440.
  
  How should I change this?

  Hello

  Go to /admin/config/config.cfg and from there to change the port number.

  After this restart server admin then it starts to use the new port number.

  I hope this helps.

  Thank you
  Srinath

• Manually change the VIEW port number

  
  Our 11.5.9 system simultaneous report ADF, we have started a background service X at the Admin level for running report server. As the UNIX admin request, we must change the port number for X windows. Since it's the production, we have a lot of customization, I want to avoid undate the context file and run the automatic configuration service. Therefore, I tried to change the DISPLAY setting in the files of the environment on levels directly. However, it does not work. Does anyone know what I missed?
  
  Here is the list of the files that I hit.
  
  adcmctl.sh, adrepctl.sh, $IAS_ORACLE_HOME/Apache/Jserv/*.properties on two levels, re - has bounced back after the application.
  
  Thank you
  
  Sean
  
  

  This is Note: quick search 364838,1 - REP-3000: internal error from the Oracle package

  Good to know that the problem has been resolved.

• : Error: the port number you entered contains a non-digit character

  Hi all
  
  Nice day.
  
  After installation of the version 11g GRID on a Windows 2008 Server, now I tried to install the Agent on one of the servers which is a 64-bit solaris box.
  
  I read that silent installation is possible.
  
  I made the necessary changes in the additional_agent.rsp.
  

  OMS_HOST=xxx.43.xx.177
  OMS_PORT=4889
  AGENT_REGISTRATION_PASSWORD=xxxxx123

  The same thing has been changed in the staticports.ini
  

  Oracle Management Agent Port=4889

  The OMS_HOST contains the IP address where the grid and OMS_PORT is the port of the GRID.
  
  Then on run the below command, I get this error:

  -bash-3.00$ ./runInstaller -silent -responseFile /t5/oracle/grid_agent/solaris/response/additional_agent.rsp
  Starting Oracle Universal Installer...
  
  Checking Temp space: must be greater than 150 MB.   Actual 10602 MB    Passed
  Checking swap space: must be greater than 150 MB.   Actual 21941 MB    Passed
  Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_11-06-37PM. Please wait ...-bash-3.00$ *** Check for updates ***
  *** Select Installation Type ***
  *** Check Prerequisites ***
  *** Specify Oracle Management Service Location ***
  *** Customize Ports ***
  
  
  
  
  
  
  ERROR: Error:The port number you entered contains a non-numeric character.

  In the file journal below are comments:
  

  bash-3.00$ vi oraInstall2012-06-05_11-06-37PM.err
  "oraInstall2012-06-05_11-06-37PM.err" 16 lines, 1474 characters
  /etc/inittab does not seem to contain default runlevel information.
  oracle.sysman.install.oneclick.queries.AgentPortHandler$PortHandlerException: Failed to allocate free Enterprise Manager Central Console Port
  from Default Range 1830 to 1849. Please free a port from the Range and re-try the installation.
          at oracle.sysman.install.oneclick.queries.AgentPortHandler.getFreePort(AgentPortHandler.java:250)
          at oracle.sysman.install.oneclick.EMGCPortDlg.getPortDialogValues(EMGCPortDlg.java:388)
          at oracle.sysman.install.oneclick.EMGCPortDlg.m_createMainPanel(EMGCPortDlg.java:301)
          at oracle.sysman.install.oneclick.EMGCOMSConnectInfoForAgentInstall$PageValidationListener.wizardValidatePage(EMGCOMSConnectInfoForAge
  ntInstall.java:262)
          at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
          at oracle.bali.ewt.wizard.WizardPage.validatePage(Unknown Source)
          at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
          at oracle.bali.ewt.wizard.BaseWizard._validatePage(Unknown Source)
          at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
          at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(Unknown Source)
          at oracle.bali.ewt.wizard.dWizard.DWizard.goForward(Unknown Source)
          at oracle.sysman.install.oneclick.EMGCInstaller.prepareForSilentInstall(EMGCInstaller.java:952)
          at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1031)
  ERROR: Error:The port number you entered contains a non-numeric character.

  Please suggest how to
  
  Concerning
  KK

  A few things to check:

  -Check that the file/etc/hosts on the computer (agent) has a target entry valid for the host, especially its ip address. If necessary, run the following commands to cross check:
  Nslookup
  Nslookup

  Note: The recommended file/etc/hosts format is .

  -Check if there is a restriction of firewall on the range of ports from 1830 to 1849

  Kind regards
  -Loc