WebLogic Version Check

Similar Questions

• How to disable the Java version check

  I have a small pc based on Linux, Firefox running in kiosk mode. The pc is not connected to the Internet and only has access to a dedicated server under my control, serving a few Web pages and a java applet. Suddenly the system started complaining java my version of java is obsolete to spoil the kiosk display.

  -How to have firefox figure on the java version is outdated so the Slingshot pc end or the back-end server have Internet access
  -are there a way to disable security java verification in one of the firefox config files? Boots pc kiosk network, firefox profile is generated automatically, so I need a way to change this in the config files, not through the GUI that I won't be there every time the kiosk boots.

  I am running Firefox 13.0.1, I know it's old but security is not a problem because I only go to my own server and update the version of firefox on the PXE image is a pain.

  It turns out that the 9Oracle) Java installation has a built-in expiration date. He was so Java blocking himself, not firefox blocking Java.

  To disable the Java version check, start the Java ("jcontrol") Panel, tab "Security" the security level to 'low '. This will disable all the controls of the version and run Java.

  Needless to say that this should only be applied when executing in a completely controlled environment where you control the client and the server (as is the case in my setup).

  More information:
  http://docs.Oracle.com/javase/7/docs/TechNotes/guides/jweb/client-security.html

• Please let me know the weblogic version support for ODI 12 c J2ee ganet

  
  Hello

  I need to install the j2ee for ODI12c agent. I did the instalation for ODI 11 g with weblogic 10.3.5.

  Please suggest me what weblogic version (weblogic 12 c or 10.3.5) for ODI 12 c Java Agent.

  Concerning

  Naren

  Hi 1875213,

  The Certification for the Fusion Middleware 12.1.3 matrix are there: System Configurations supported in Oracle Fusion Middleware

  12.1.3 ODI he supports weblogic 12.1.3.

  Don't forget to close your previous question, if we respond.

  Kind regards

  JeromeFr

• Remote Agent: OLT returns Version check was no Match

  I am trying to use remote agents. I tried Windows and Linux agents with identical results.
  
  After you run a test with one of the remote agents, the server displays:
  Status current error
  Check orphans of the Version of the Agent was no Match
  
  Customer shows:
  18:19:04, queue 198 INFO [Messenger] Try server=t3://192.168.32.102:8088 = queue/AgentPoolNotificationQueue
  18:19:04, 259 INFO [Messenger] obtained ConnectionFactory
  18:19:04, 273 INFO [Messenger] Got queue queue/AgentPoolNotificationQueue
  18:19:04, 291 INFO [Messenger] creation queue connection.
  18:19:04, 304 creation INFO [Messenger] queue session.
  18:19:04, 316 INFO [Messenger] connected to the queue server=t3://192.168.32.102:8088 queue/AgentPoolNotificationQueue =
  18:19:04, INFO 316 [request] [URL:t3://192.168.32.102:8088; ID of applicant: oats; Applicant Key: 99bb5c62-f65a-4dbc-b8cb-db44bbd3ece4; Applicant: waiting / AgentPoolNotificationQueue; Request ID:6; [Request: stopagent;] -authentication successful
  18:19:04, 316 ERROR [EmpStartMain] unknown agent ID: agId14_rnda167a6bd-2f25-4be8-b449-903b9bb7cd40
  
  Any help is very appreciated. Searched Metalink and found nothing on this specific error.
  
  Thank you
  
  John A. Booth
  http://www.metavero.com

  The wording of the initial error "Version Check failed to Match" makes me think that it resembles something that I met once after the installation of a small tuft release. You must ensure that the Agent installed on the remote computer is the same version as the controller.

  for example if you had installed on machines both controller and agent and then improved OATSv9.00 JUST OATSv9.01 the controller controller would be able to talk to the agent on the remote computer v9.00.

  I could be wrong, but that's essentially what I found with one of the v8 improvements as soon as possible.

  Try to upgrade the agent on your machines remotely with the same setup you have on your controller (but only to install the agent, not the paclage of whole OATS).

  Published by: IHodgetts on January 28, 2010 16:55

• OSB - compatibility of the versions of Weblogic version

  Hi all

  We have Weblogic Server on 10.3.2 and would like to install OSB.

  I know 10gR 3 is compatible with WLS 10.3.2

  I would like to know the latest versions of OSB 11 g compatible with WLS 10.3.2.

  We have no plans on upgrading our Weblogic Server for future releases.

  Thank you

  Satya

  I guess that 10gR 3 is compatible with WLS 10.3.2. To use superior versions of OSB, you need to upgrade your WLS as well. For more information, you can see the matrix of certification for the OSB above 10gR 3.

  Kind regards

  Karan

  Oracle Fusion Middleware Blog

• DPS version check

  Hello

  Anyone know where I can check my version of dps (single/pro/company) on mac?

  I couldn't find anything.

  It's a mac of the company, so dps was already installed when I started working with... so I have no version of idea of dps wich I.

  If there is already a thread about this pls link 4 me... didn t find anything.

  THX,

  Why not update the tools more recent? If you do not create folios for an old app in the store, just go to the Adobe download page and download the new version.

  To find the version, you can open the Folio Builder Panel and choose on the fly on the menu.

  Here is an article on versions of viewer which is somewhat obsolete:

  http://blogs.Adobe.com/indesigndocs/2011/12/understanding-DPS-tool-versions.html

• The Sprint Version check?

  I just double check that I'm interested in good info.

  If I have the most up to date set of tools, I am running spring correct v23?

  Thank you

  Incorrect answer. 24 is the current version.

  Bob

• Version check in which the form is opened

  Hello

  Is there a way to check the version of adobe used to open a form, and then display a warning/error message if it is less than the target version?

  For example, I have some forms that must be opened in Acrobat or Reader 9. If someone uses Acrobat or Reader 8, I need to give a warning.

  Thanks in advance!

  Student

  XFA. Host.version;

• Version check

  This page verifies that I have the latest version of Flash Player:

  https://helpx.Adobe.com/Flash-Player.html

  ... which is (from Sep.08, 2016)

  INFORMATION ABOUT YOUR SYSTEM

  Your Version of Flash 22.0.0.209

  Name of your browser Firefox (NPAPI)

  Your operating system (OS) Windows (Vista)

  However, this page:

  http://www.Adobe.com/software/Flash/about/

  is unable to detect the Flash Player.

  I don't know why.  Just thought I'd know you people.

  I'm running Vista (64-bit Home Premium) on a desktop Gateway FX6800 - 03 h.

  It's the first real oddity that showed, with Flash Player, in addition to four years.

  It seems not to be working well.

  ==========================================

  By the way; the rigmarole to get to this point to ask a simple question is by far a great way to signal a trend to the decline in support.

  I just tried you people give a head on a problem potentially bad.

  Adobe - Flash Player page is now fixed.

• Build clustered ESXi Version check

  Hi all

  I wrote script below to get the Version single ESXi host build, but I don't get any output.

  $hvs = get-VMHost | Get-View

  $cv = get-Cluster | Get-View

  {foreach ($hv to $hvs)

  $hv |? {$_. Parent - game $cv. MoRef} | Select @{N = 'Node ESXi Version'; E={$_. Config.Product.FullName}} - single

  }

  I miss something in this script, please suggest.

  In this case, the variable $cv will be a table and $cv. MoRef do not exist.

  Try like this, ESXi nodes will belong to a cluster.

  Get-Cluster | Get-VMHost |

  Select @{N = "Version ESXi node"; E={$_. ExtensionData.Config.Product.FullName}} - single

• VirtualHardware-Version check (Version of VM)

  Hi all

  I would read all the VM´s (VirtualHardware) Versions, because we need to update all VM´s with Version 3 to Version 4.

  How I read this with PowerClI?

  THX in advance

  Chakoe

  You can use the Export-CSV cmdlet

  $expOut = @()
  
  Get-VM | %{
        code.....
        $expOut += $out
  }
  
  $expOut | Export-CSV c:\myFile.csv
  

  Don't forget to click on the useful/fix button

• 11.1.3 on Weblogic version deployment planning

  Hi guys,.
  
  We deployied V11.1.3 of planning on weblogic 9 and we have a problem with the registry and we have a lack of input, which is the entrance to HyS9Planning under SOFTWARE/HYPERION SOLUTIONS/HYPERIONPLANNING
  
  could someone please post this register and there are fields containing values?
  
  Thanks in advance

  How about marking the correct/good post because I answered your original question :)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• WebLogic version 9.2 - change Port number

  Hello
  
  How can I change the admin default 7001 port number?
  
  I couldn't see the < listening port > tag in the file config.xml in the field. I am using weblogic 9.2 on linux.
  
  I even tried to change /weblogic92/common/templates/scripts/wlst/basicWLSDomain.py as below... NA not worked. Please notify.
  
  ==================
  CD (' Servers/AdminServer')
  Set('ListenAddress','')
  together ('ListenPort', 8001)
  ==================
  
  Concerning
  YSÉ

  If you want to achieve by using JMX, then you can try:

  http://middlewaremagic.com/WebLogic/?p=613

  Using WLST you can do online... like:

  Java weblogic. WLST
  WLS: / offline > connect()
  Please enter your username [weblogic]: weblogic
  Please enter your password [weblogic]: weblogic
  Please enter the URL of your server [t3: / / localhost:7001]: t3: / / localhost:7001
  T3 connection: / / localhost:7001 with username weblogic...

  Edit()
  startEdit()
  CD ("servers/AdminServer")
  cmo.setListenPort (9999)
  Save()
  Activate()

  Now YOU DO NOT restart your server for reflact these changes...
  The JMX Code above is also able to do in run mode only on the fly.

  Thank you
  Jay SenSharma

  Published by: Jay SenSharma on March 3, 2010 16:04

• How to check weblogic log(wls10.3,wls9.2) in EM 12 c Console

  Dear Expert:

  My client wants to use enterprise manager 12 c console to check weblogic log,.

  And their weblogic 10.3 and 9.2, does not have an extension JRF, as I know, em12c can't see

  Journal of weblogic domain database, it requires weblogic domain have activate JRF. but in the customer environment

  They have a lot of weblogic 9.2 and weblogic domain 10.3.0 weblogic version.

  My question is:

  We want to know em12c support newspapers of the Analyzer can work in weblogic 9.2 and 10.3.0?

  WebLogic 9.2 and 10.3.0 does support JRF function?

  How can we support weblogic 9.2 and 10.3 loging monitoring function.

  Thank you very much.

  Eric

  Hello Eric,

  WLS 10.3.0 and 9.2 cannot be JRF enabled, as they are BEA (non-Oracle) releases. See note 1272884.1 for more details.

  You can use the metric of monitoring of log files from the target host.

  REF http://docs.oracle.com/cd/E24628_01/em.121/e25162/host.htm#EMFHM378

  Paul

• Invalid version of WebLogic error - installing Gateway Primavera

  This question has been already posted in Primavera Bridge 14.2 setup

  But he has failed. I made sure that each component is selected according to the supported document configurations tested configurations.

  The path for Middleware House must be given to the "/ opt/local/software/unifying/Oracle/Middleware/Oracle_Home. This solves the problem. (I don't know if it's the appropriate label, i.e. 'Oracle Middleware Home' for entry. In addition, the error was misleading. I expect the home rather than "invalid weblogic version" error invalid Middleware.)