Weblogic with several servers (SOA) domain managed configuration

Similar Questions

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Unexpected behavior with several structures of events manages the event itself.

  Hi, does anyone have an explanation of the following behavior?

  After 'Boolean 2' is enabled and then disabled the program "freezes". You can always pause the program but nothing does.
  For example, by pressing one of the file, Edit, View, project, Operate, tools, Windows, help or any other object inside the VI.

  This happens if I have two event structures who want to handle the same event, even if the flat sequence should be allowed only one run.

  

  This isn't a bug.

  Structures of the event should be used to handle different events. Given that you have entered your Boolean event in the two structures of the event, the event gets queued both when it occurs. This means one or the other be expected to manage the event and will, by default, lock the application. In the scale-measure of LabVIEW architectures, usually there is a structure of single event that handles all the events and then sends messages to the coast to the rest of the application to manage these events.

  There is a "Table locking" checkbox in the event dialog box which is by default enabled, but you should leave it on because it leads to bad practices otherwise.

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• Volumes of App with several areas

  Hello

  We have volumes app setup within our environment. Within our environment, we have several areas Setup active directory. Is it possible to configure Manager Volumes App to see several areas active directory, or do we need to configure a volume of separate application for each domain manager?

  Thank you.

  Rob.

  Volumes of App supports several areas approved under a single forest. Ideal configuration is to provide the Volumes App Manager with credentials for the forest root and it can then cross in the child domains as needed.

• Portal Oracle WebLogic with OAM - Question of Architecture

  Hi all
  
  I have the following customer need.
  
  Oracle Portal 11.1.1.6 that is deployed on WebLogic Server 10.3.6
  11.1.1.5.0 Oracle Access Manager
  Oracle Internet Directory 11.1.1.6.0
  
  The customer wants to have Single Sign On for the Oracle Portal Application. It's my understanding of the Architecture.
  
  Oracle HTTP Server (with WebLogic plugin Proxy) converses with Oracle Portal
  Oracle HTTP Server (ditto above with WebGate) talking to Oracle Access Manager
  Oracle HTTP Server has Oracle Web Cache
  Oracle Access Manager talking about OID
  Oracle Portal talk to with authenticator OID OID
  
  When I went through the Oracle Portal documents, they provide steps for Oracle Portal that is deployed on Oracle Application Server, but not with WebLogic.
  
  My questions
  
  (1) do I configure authenticator OID to myrealm of the WebLogic domain (which hosts the Oracle Portal) to connect to OID?
  (2) at - it something more, that I have to do to integrate Oracle Portal with OID (meaning running pl/sql scripts or one)?
  (3) kindly advice me on the stream Cache Web Oracle, Oracle HTTP Server and Oracle Web Gate to the OAS Portal Oracle?
  
  Thank you
  
  Kind regards
  
  Somerset

  OK - portal will always OID as prerequisite.

  Thank you
  EJ

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• Failure of network connectivity in the VMware Update Manager Configuration tab

  I am facing network connectivity problem in VMware Update Manager 'configuration' tab screen shot is attached with this post.

  Please help... How can solve this problem.

  Server is registered with domain name and Windows Firewall is also off this server.

  Hello

  not to be confused with the text in red, it's normal, even if connectivity is in place

  go to the next item 'download settings' and click on the test of connectivity on the bottom button to test if the connection is available.

  Concerning

• Several servers to Virtual Center?

  Hello

  I was wondering what the best practice if you have several servers to virtual centres.  I currently have 1 Virutal host manage all of my ESX servers in my network, but I would like to install a 2nd one to another office for purposes of recovery after disaster or incase I have a connection not tight with the other office for a long period of time.  Now, I know that you cannot have an ESX Server assigned to 2 different servers in VC then what would be the best practice in this case.  You just assign all ESX servers in the other office to its local VC server and all the other ESX servers in headquarters would be assigned to its local VC server.

  Also if the server VC in each office where fail for a long period of time would be a big job to assign the other ESX servers to the server VC remaining?

  I agree with Mike that is the best solution for your situation, there is no need more complicate the issues.  For a little bit further, perhaps cluster the database so that the database is always in sync, then simply reinstall the clone of Dr. on the database if the primary site goes down.

• problem with several Referral Services

  Hello
  
  Can someone help me regarding multiple presentation services with different servers as services presentation url should be like
  http://localhost1:9704 / analytics and
  http://localhost2:9705 / analytics_test
  I made up the different port numbers, by deploying analytics_test in enterprise manager and changed the port number in the web.xml file and created again another instance configuration file with changed DSN name and port listening and also changes in xmlp-server - config.xml and bioffice.xml but I am struck now, host names where should I make changes so that I get
  localhost1 and localhost2?
  
  
  
  Thank you

  If you want to work on the test environment on your own computer, you can follow the instructions in the link above:
  http://bvellinger.blogspot.com/2008/01/OBIEE-10132-and-multiple-presentation.html

  Then, you must edit the file:
  C:\WINDOWS\system32\drivers\etc\host

  And change it like this:

  127.0.0.1       localhost1
  127.0.0.1       localhost2
  

  A ping and then return a response:

  Microsoft Windows XP [Version 5.1.2600]
  (C) Copyright 1985-2001 Microsoft Corp.
  
  C:\Documents and Settings\Nicolas>ping localhost1
  
  Pinging localhost1 [127.0.0.1] with 32 bytes of data:
  
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  
  Ping statistics for 127.0.0.1:
      Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
  Approximate round trip times in milli-seconds:
      Minimum = 0ms, Maximum = 0ms, Average = 0ms
  
  C:\Documents and Settings\Nicolas>ping localhost2
  
  Pinging localhost2 [127.0.0.1] with 32 bytes of data:
  
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
  
  Ping statistics for 127.0.0.1:
      Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
  Approximate round trip times in milli-seconds:
      Minimum = 0ms, Maximum = 0ms, Average = 0ms
  
  C:\Documents and Settings\Nicolas>
  

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• I'm stuck with several GB of music files on my phone and I can't get down them!

  The other day I tried to install an application on my phone, but I didn't have enough memory.  My phone is full of music via iTunes synchronisation dock. So I connected it to my computer to try to make some more room. But there is a problem.

  (1) Apple does not play nice with Palm. Synchronization is no longer permissible or possible. I can't use iTunes to manage/delete music.

  (2) in USB Mode, there is no way to access/view the library. It's just not there.

  I tried Palm support, and they confirmed that the USB Mode is not working. I guess that the library is located in a hidden folder or directory. They suggested that I downgrade my iTunes. Goal that is unacceptable to me because one) it forces me to break the license Apple, b) it is not taken in charge, and c) if there is still a remote chance it will mess up my iTunes library, I won't.

  I'm ready to get off at Palm headquarters and throw my phone to their building.

  Can someone tell me how to delete my library without hacking iTunes?

  I thought about it. Support, put this in your KB. Everyone who was sync via iTunes on a Mac is currently STUCK with several GB of music on their phone that they cannot manage or remove, which makes the Palm Pre a lot less useful than announced.

  USB mode is a waste of time for people on a Mac. These hidden files are never going to be visible, and the library cannot be removed. The solution: go through a PC. Anywhere, any PC will do. Connect your phone to the PC, go to the USB drive Mode and show hidden files, then delete them from there.

  I got an old laptop lying around at the bottom, and the problem was solved lickety split.

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to adjust the height of the domain manager?

  Hello world

  How to adjust the height of the domain manager?

  I want to fill my page with three buttons and a title screen label.

  I have to fill the full screen so that I can put a border for my screen...

  If I can adjust the height of the domain manager then I can put border for it.

  Thank you.

  try something like that.

  verticalManager = new VerticalFieldManager()
          {
  
              protected void sublayout( int maxWidth, int maxHeight )
              {
                  //set width
                  int displayWidth = Display.getWidth();
                  //set height
                  int displayHeight = Display.getHeight();
  
                  super.sublayout( displayWidth, displayHeight);
                  setExtent( displayWidth, displayHeight);
              }
          };
  

  Concerning

  Bika