Unexpected behavior with several structures of events manages the event itself.

Similar Questions

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• several structures of event

  Experts,

  No harmful effect of having two event Structures, one in the main BD delivery of user interface events (button presses, menu etc.), another running into a Subvi loop, handle events of the user?

  My reason for doing is also blocking calls UI (like brining a dialogue password entry) could not be paid directly to the event Structure. I use the user events (and thus a corresponding event Structure) as the basis of a periodic Task Scheduler and my tasks get unmanaged queued properlyif something blocks the Structure of the event.

  Of course, I would be careful that there is no common event between the two structures. This would be easier, due to the nature of the Subvi in the event user manages the Structure of the event.

  Thoughts?

  Nothing inherently wrong to have multiple structures of event. Our application tend to have dozens and dozens at the same time, due to the fact that the user events, while demanding a bit of wiring and infrastructure, are incredibly useful things.

  The main caveats are:

  1. If you subscribe to a user event, wire the event record Refnum to more than one Structure of the event, or the behavior is undefined. Sometimes, one or more of the event structures don't receive the event. Instead, register the event several times, one for each structure of the event.
  
  
  2. As Ben said, save more than once for the same event of filter.

  Another easy way to circumvent the problem of blocking dialogue would be to create another loop whose sole responsibility is to pop up dialog boxes blocking. You can use a queue or user events or else send messages to and from this loop. A single loop should be enough, especially if the pop ups are modal and could only be active anyway. To be honest, I've never had to do this, but it seems it would work very well.

• Object with several States and slider in the "folio" are pixelated, settings seem correct.

  I can't keep an object with several States to be rasterized text, as well as a slider which is also dithering.

  I read that you are supposed to adjust the folio, and article up to be .pdf and the cursor should have the possibility of vector chosen.

  I have not found anything to object state multi for these parameters.

  What happens is when I exit the folio to Adobe Content Viewer, only the text of these items is rasterized. All other texts to be crispy. Tested on Mini iPad and iPad retina and both are blurred.

  Is there a way to force the vector option? It seems even with the selected options it is still screening test in interactive elements.

  Thank you!

  I don't know if I missed something, but it seems to work now. Maybe the v26 option (I deleted the old folio and recreated, and it works as expected now.)

  Can you send me a link to information about the scrolling content and the position of the document? The method I used the frame was from an article of Adobe, although it could be old.

  Thanks for your help!

• several structures of event in a VI

  I have two event structures in a single VI, which handles the events that freeze the user interface and the other for events that are not. This last group is all triggered acquisition tasks, where arm you data acquisition, but maybe can abandon it (or do other things, while waiting for the data to come. Of course, you need a stop button to be active and responsive. With hindsight, using two loops was perhaps a bad choice, but one that I did because it never occurred to me that these things would be only after the fire and should be put in a while loop to be kept active. No other language not as I know. Anyway, the question is how can I keep the two assets? I surround both in a single while loop? Can I give each their own while loop. Can I give up and merge the structures of two events into one. For clarity, I would like to separate them, but this is not essential. I ' LD would like to know what are my options.

  Rossu says:

  If they are sperate while loops will be they have both run. If they are in a loop the loop recycling if a structure is still waiting for an event?

  The answer to this is fundamental to the work of LabVIEW. A loop will not proceed to the next round until the end of everything inside. If you have two event structures in the same loop, two of them need to deal with an event (or a timeout) before the will of loop iterate.

  You can have several event facilities in the same VI.

  By 'freeze the user interface,' do you mean the 'Blocking façade...' box "in the case of dialogue? There is no problem to have some events that can I lock the Panel front and some that are not in the same structure of the event. I'm not sure that's what you mean by 'freeze' the UI, however.

  EDIT: and comment more. Generally, you should not put long tasks (such as data acquisition) within a structure of the event. Instead, the case of the event should pass these tasks to a separate loop (for example, by using a queue) so that the structure of the event can quickly return to listen for other events.

• unexpected behavior with vpn, clientless ssl and smart tunnels on ASA 5510

  Hi there, hope someone can help

  I am able to set up a smart tunnel for an application and everything works fine, however...

  Without smart tunnel, the user must navigate the portal interface (because of how he encapsulates urls and basically acts as a proxy), it is too beautiful and good and expected behavior. If a user does not enter a URL in the portal URL entry (only enters the normal address bar) she takes them outside the clientless ssl vpn portal.

  Now too the point to start a smart tunnel, URL, the user types in the normal address bar is not encapsulated in the device URL, although they are still placed through our network (and note, the intelligent application of tunnel is not the browser, which is be IE). How can I know it? sites that would be blocked by a web filter are blocked with smart on but not PVD tunnels with smart tunnel.

  I need to know if this is intended behavior or not and how and why this is happening?

  Thanks in advance

  In my view, this is how it works. If you are referring to this doc:

  https://supportforums.Cisco.com/docs/doc-6172

  Smart tunnel is functioning all or nothing. Which means once you turn it on for a specific process or a specific bookmark, all your traffic for this process (and the browser you are using to open the SSL Clientless session ) will pass through the ASA.

  Example: Enable option ST for a process or bookmark #1 (which connected IE used to login). Opening a separate instance of the IE browser will be all traffic through the ASA, tunnel, if the new browser window belongs to the same process. All tabs on the movement of this browser browser will be smart tunnel, even to Favorites (ie. #2 favorite) are not specifically the chip in the tunnel. You must use a different browser (ie. (FireFox) in this case, if you want some of your traffic (ie. #2 favorite) is not to be smart tunnelees.

  I hope this helps.

• Unexpected behavior with the role of OmeSiteAdministrators

  I is currently working on the test of the functionality of the OmeSiteAdministrator role, so we can use it in our Organization.  We run OME 2.0.0.1926.

  I went into preferences - permissions of device group and add a new test user (using members of the edict of OmeSiteAdministrators common task.)  I've provided the correct user and domain name.  Then I went to the section manage permissions of the device group and selected a group that this user must be able to deploy updates and tasks remotely.

  By connecting to the Console as long as this test user I could see all THE devices to Manage - devices.  When I went to Manage - system update I have also able to note all the devices listed in the incompatibilitee section and select any device to bring up the window of the tasks of system update for.

  I looked at the roles of the test user (by clicking the user name in the upper right corner) and saw that he was an OmeSiteAdministrator and OmeUser.  It looks like a clean install of OME adds the BUILTIN\Users group to OmeUsers group.  I deleted the OmeUsers group builtin\Users and then the test user could see that members of a group specified in Manage - system update.

  But when launched test user then the console OME, they could still see all devices to Manage - updating the system, even if the top of the window shows "System Update: filter by: ..  The actually specified group that contains a single device, but the test can view all devices.

  I have logged in as an OmeAdministrator, came back on the device group permissions and see an additional user.
  In modify the members of OmeSiteAdministrators, I see the test user appears twice, both times with the user name and the appropriate domain.  But there under manage group permissions on the device, the user/DOMAIN user that I added, but now also a STRANGER/user (domain is actually 'UNKNOWN' and user is the user name of test).

  It seems that the filter does not always work (it worked only once for the test user.  Each time other than the test user opens the console he showed all devices.)  Also, Im not sure why there is the addition of the UNKNOWN/username user.

  Also, please review read the white paper on delltechcenter.com/ome and see if it offers any help.

  OpenManage Essentials Role-Based Security and implementation

  Thank you

  Rob

• Weblogic with several servers (SOA) domain managed configuration

  Hello
  
  We try to create an area where we have an admin server and 2 servers managed based on SOA in a cluster.
  
  field
  Admin_Server
  SOA_Cluster
  SOA_Managed1
  SOA_Managed2
  
  I have try the defaults, but it puts my soa-infra in the administration server and as far as I know that is not supposed to be the case.
  
  Can someone tell me what are the libraries that I should be selecting for the cluster when I try to configure the field?
  
  Thank you

  Follow this...
  http://docs.Oracle.com/CD/E23943_01/core.1111/e12036/extend_soa.htm#BGBBIFCI

  See you soon,.
  Vlad

• In a helpset with several CHMS, how to make the table of main contents appear in all CHMS child?

  I use RoboHelp 11. The software product I am documenting is modular, so help is also divided into numerous CHMS (requirement). One of the other requirements is that the table of contents of the master project appears, called anyone who chm contains the link by the software. I did it with merged WebHelp (Kudos to Peter Grainge), but I could not help using RoboHelp HTML. Someone has it tried with success? Advice would be appreciated.

  This forces you to make the following changes:

  1. In each project, open the window used to display CHM. Click Advanced Properties and enter the name of the file from the table of contents for the master project in the field of the "Table of contents".
  2. After compiling all the files, open the master project. High hydrostatic pressure in the Notepad file. Locate the [MERGEDFILES] section. This should be a list of all CHMS that make up the final deliverable. For some time I used CHMS, so I do not remember if you must do this in all projects. Try first in the main project and you'll know if you do.

• A quiz with several answers of choice in the context of an application.

  I would create a quiz of ten questions, each with three multiple-choice answers to choose from. I would like the user to give a score out of 10 when they finish. I want to integrate the quiz in an application in offline mode created for iPad using InDesign and DPS. 10 iPads will be used during an exhibition for children to learn about Civil Engineering. They will be offline so all content must be locally on the iPad. Can someone suggest a viable way and appropriate to achieve this?

  As long as you don't need to store the responses noted later when the devices are connected, you can build your quiz in HTML (be sure to locate the javascript libraries you use) and then just run your HTML quiz through a framework of web content.

  This at least is the reasonable way to do it. The mad scientist in me also worked a way to use the MSOs and page jumps.

  If you are not worried about showing children what questions they were wrong at the end (just the number of right answers and wrong), you would begin with 10 pages, one for each question. Each page with an MSO with three States include: unanswersed, good choice, the wrong question. The selection of an answer is a "next" button If the question has been answered correctly, it would take you to a page that has followed the trail "zero fault". If she was wrong, you go along the track "a fault". This would be repeated for each question that each wrong answer would pass you to a lower track while a correct answer you would continue on the current track. If my calculations are correct, it would take 56 (or 57 if you wanted a landing page) pages, each with a State three MSO on it.

  There are about a dozen ways you could break the DSO and version of page break, so I do not recommend, but if the HTML code is to join, you have an idea of how it could, THEORETICALLY, remove it.

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• is there a way to code with several people at once on the same page?

  In my class today, we were tasked to build a web page and it works a lot better if we could all work together both on the same pages.

  Your best option is to use a svn like github to create a repository and have contributors to fork your repository (and the code on the same page at the same time). While contributors send shooting you pray that you can use to merge code contributed in your master repo.

• Unexpected behavior of class constructor

  Hello world

  I came across an unexpected behavior with definitions of AS3 classes this morning. To tell him quickly, I can't create an instance of a class inside the same methods of the class. Too bad.

  Here is an example:

  package {}

  import flash.display.MovieClip;

  import flash.events.Event;

  SerializableAttribute public class Test extends MovieClip {}

  private var _double:Boolean;

  _T:test private var;

  public void Test(double:Boolean_=_true):void { }

  This ._double = double;

  trace ("new test (" + the ._double + ")" ");

  this.addEventListener (Event.ADDED_TO_STAGE, this ._onAddedToStage);

            }

  private void _onAddedToStage(pEvt:Event) { }

      

  this.removeEventListener (Event.ADDED_TO_STAGE, this ._onAddedToStage);

  trace ("creating a double?");

  If (this ._double) { }

                      trace ("yes");

  this ._t = new Test (false);

  } else {}

                      trace("no");

                 }

            }

       }

  }

  What I'm trying to do seems a bit strange: when an instance is created, it generates a new one in him passing a parameter to stop treated duplication, so I shouldn't have infinite loop like that. Moinde I had a beautiful #2136 error when running (data not valid in the file SWF?):

  New Test (true)

  creating a double?

  Yes

  : Error #2136: blah blah blah

  Can someone explain to me what is happening here? I would like to understand the sub-process that prevents from doing.

  Thanks for the reply,

  Fran_cois

  Hello

  I changed your code in Test.as:

  package
  {
  import flash.display.MovieClip;
  import flash.events.Event;
  SerializableAttribute public class Test extends MovieClip
  {
  private var _double:Boolean;
  private var _t:Test;

  public void Test(double:Boolean_=_true):void
  {
  This ._double = double;
  trace ("new test (" + the ._double + ")" ");
  this.addEventListener (Event.ADDED_TO_STAGE, this ._onAddedToStage);

  }
  private void _onAddedToStage(pEvt:Event)
  {
  this.removeEventListener (Event.ADDED_TO_STAGE, this ._onAddedToStage);

  trace ("create a double?");

  If (this ._double)
  {
  trace ("Yes");
  This ._t = new Test (false);
  addChild (this._t);                      It's the new line!

  }
  on the other
  {
  trace ("no");
  }
  }
  }
  }

  and then used this class not as a document, as a class in the fla file:

  var ttt:Test = new Test();
  addChild (ttt);

  So, it does not work as expected...

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• How to run the powershell script of command with several parameters

  Is there a way to run a powershell script from the dialog box run with several parameters? In addition, the path to the script contains spaces, for example, c:\powershell scripts\script.ps1.

  Take a look at http://www.powershell.nu/2009/12/16/running-scripts-with-arguments-in-powershell/ which explains how to pass arguments to a script.

  André