WebUtil gives no jacob in java.library.path when you try to read an Excel

Similar Questions

• Using script - library locked when you try to add the file to it

  Hello

  I'm just a simple script that I can run with my engines of the action, so if I add new enum values I can create new wrappers quickly. I am able to create a new VI on disk, but when I try to add the the VI to the library, I get "error 1562: library, or the specified project is locked." Just before adding the article, I tried to adjust the State of the library "Not locked", but has not been the tower.

  Directions to see the error:

  Open attached zip file

  Open 'Engine.lvlib Action '.

  Run "Script - Create Wrapper.vi.

  Please let me know how to get around this, I thank you,

  Gregory

  There are two reasons at least a library locks: 1) something he possesses is running, 2) is open in two or more instances of the application.  (This applies to classes too.)

  I started a project and took your scripts out of the library (to avoid the #1) and then open your Library Reference by path in your script, be sure to include the reference of the application (to avoid the #2).

  Works now.  (With the exception of the Init.vi but you mentioned earlier that you knew about it. But point 1 and 2 of article work fine.)

• BlackBerry Smartphones MySpace untrapped exception: java.lang.NullPointerException when you try to access the friends

  Curve 8330 Verizon Wireless

  4.5.0.77 (Platform 3.2.0.51)

  V1.0.0.29 AppWorld

  MySpace v1.5.0.12

  Facebook v1.5.0.32

  Was a problem with MySpace, found no messages/threads with this specific issue, if you are looking for help.  I noticed in the review for MySpace v1.5 on AppWorld Board there were other owners of the Curve 8330 has the same question:

  Whenever I try to view my friends list, add a friend, or look at someone from another friend list, the application crashes.  If I leave the app to do something else while it loads and try to re - open, I get:

  Untrapped exception:

  java.lang.NullPointerException

  Research on the forums for this error of java, most of the suggestions were to reload the operating system of the device such that it may be corrupted.  As an attempt to solve the problem, last night I upgraded to v4.5 v4.3.  When I have been upgrading completed, my MySpace, AppWorld and Facebook apps has shown under options > advanced > applications, but the icons could not be found.  I even searched the hidden icons and still no luck.  I used the destop application loader to remove these three applications in the device manager.  I then downloaded AppWorld from my (www.blackberry.com) device and once it has been installed it used to download and install MySpace and Facebook.  Once they have downloaded and installed, I turned off and only went to a battery.  Restarts, showed the icons and apps worked... except for the MySpace Friend list: same problem.  I don't remember when this error occurred initially, but I guess it was after the last MySpace app update.  Were not immediately thereafter, however.  I can access my messages, and the home page, but that's all.  I already sent an e-mail to [email protected] with no response

  Any help out there!

  MySpace 1.5.1.7 version is available for download!

  Curiously, the app started working properly a few days there with the exception of slow notifications, but not mistakes.

  Thanks for all your support!

• ODI to TimesTen failed to connect (no ttJdbcCS1122 in java.library.path)

  Hello
  
  I have ODI 11 G(32bit) installed on a Windows Server 2008 R2 SP1 (64-bit). -Client(64bit) TT 11.2.2.4.1 installed
  I'm trying to connect to TimesTen 11.2.2.4.1(on Exalytics).
  
  I am able to test the ODBC to TT connection on the windows machine and its working fine (able to connect to storage of data via SQL Developer TT)
  But connectivity fails to ODI for each database on a same TT DB. After you create a new database on the ODI server, when I try to test connectivity I get following error:
  
  java.sql.SQLException: problems with the native/lack of loading methods library: no ttJdbcCS1122 in java.library.path
  
  I took ttJdbcCS1122.dll file TT client directory on the windows machine and tried to put this file in various Java lib/bin folders. But it did not work.
  
  JDBC driver: com.timesten.jdbc.TimesTenDriver
  URL JDBC: jdbc:timesten:client:dsn = TT_AGGR_STORE
  
  We need help on this ASAP. Pointers would be appreciated.
  
  Thank you
  Srikanth
  
  Published by: 980495 on March 17, 2013 23:26

  You cannot use a 64-bit with a 32-bit application client. Installation of 64-bit 11.2.2.4.1 TimesTen client includes a 32-bit client installation as well. You configure the client 64-bit DSN by using the 64-bit Windows ODBC Data Sources and configuring 32-bit client DSN by using the ODBC 32-bit Data Sources. Then, use the 32-bit ODBC Data Sources applet to configure and test a 32-bit DSN, make sure that the path to the 32-bit client is included in your CLASSPATH and native.library.path for any substance as ODI Java and use the 32-bit DSN in the JDBC connection URL.

  That should solve this problem.

  Chris

• Launch an application requiring java.library.path

  Hi all
  
  I am creating an exe win32 wrapper to launch an application that requires native libraries - speficially a SWT application, if it matters. CreateJavaVM works, however, FindClass() always returns NULL when I try to load my class with the main() method.
  
  What is strange, is that FindClass() can load other classes that contain references to SWT in my fine application . I checked it will load classes for fine raw data structures, of course those who do not have my inside main() method. I also checked that it can load and run a simple "Hello World" - style Swing application. This makes me believe that I must do something to load, or point to the SWT DLL to get things to work.
  
  Any ideas? Something in the options when the CreateJavaVM call perhaps? Here's how I am the appellant currently, including a futile attempt to put java.library.path (fails with and without this part). Because now I'm just falling into a directory and pointing to the DLL, but I see that SWT apps can load embedded swt.jar in the DLL, which of course, I want to take the measure of the possible:
  

  JNIEnv *createVM(const TCHAR *installLoc)
  {
       JNIEnv *env;
       JavaVMInitArgs args;
       JavaVMOption options[2];
       jint res;
       char classPath[MAX_PATH];
       char javaLibPath[MAX_PATH];
  
       if (-1==sprintf(classPath, "-Djava.class.path=%S\\%S;%S\\%s", installLoc, MAIN_JAR, installLoc, "swt.jar"))
       {
            return NULL;
       }
  #ifdef DEBUG
       MessageBoxA(NULL, classPath, "Classpath parameter:", MB_OK);
  #endif
  
       sprintf(javaLibPath, "-Djava.library.path=%S\\native\\win32", installLoc);
  #ifdef DEBUG
       MessageBoxA(NULL, javaLibPath, "Library path parameter:", MB_OK);
  #endif
  
       args.version = JNI_VERSION_1_4;
       args.nOptions = 2;
       options[0].optionString = classPath;
       options[1].optionString = javaLibPath;
       args.options = options;
       args.ignoreUnrecognized = JNI_FALSE;
       res = CreateJavaVM(&jvm, (void **)&env, &args);
  
       return env;
  
  }

  Thank you!

  It is a java exception. You do the same thing as in java - print the stack trace.

• "no ocijdbc11 in java.library.path" error when you connect a commander AMT database

  Hello
  
  "no ocijdbc11 in java.library.path" error when connecting to a connection of AMT database
  
  I have the same problem "error code" when to test the connection to a database, even if I have an APEX db which connects without a problem.
  
  I have re downloaded jre & SQL Developer just to make sure that all the files are where they should be in no chance.
  
  I also tried most of the suggestions in different threads.
  
  Does anyone know what can cause exactly this error?
  
  for example; should I be looking for a file called "ocijdbc11" & put it in the path "java.library.path"?
  
  Can someone explain to a beginner to db connections I have to do?
  
  I use the 'light' client check box is clear, and I do not know which way to enter the correct file so that it works?
  
  It is must connect as a TNS connection & was working fine until recently, the only change I can think is a moving files from the 'C' drive, but I thought developer redownloading SQL would slove this.
  
  Thank you

  user5833695 wrote:
  I do not have this access path to check on my PC & triued to find it, but could not.

  So what OS are you on?

  I also did a search for the file "ocijdbc11" on my hard drives & didn't find no match, this could simply be the problem, that I do not have the file?

  No, the sqldev comes with its own drivers. First try to enter said tnsnames.ora as thefurryone path and restart.
  If still no go, you can try to bypass the problematic environment settings by changing your ORACLE_HOME in a batch (inside the sqldev folder) file:

  set ORACLE_HOME = % CD
  Start sqldeveloper.exe

  Hope that helps,
  K.

• UnsatisfiedLinkError: no libdbxml_java25 in java.library.path (2.5.16)

  I built 2.5.16 source in Windows XP Home Edition (32 bit). I left the debug settings. Binaries were thus placed in G:\dbxml*bin\debug* - G:\dbxml*bin* contained only zlib1.dll.

  :: dir /b G:\dbxml\bin\debug
  dbxml.exe
  libdb48d.dll
  libdb48d.pdb
  libdbxml25d.dll
  libdbxml25d.pdb
  libdbxml_java25d.dll
  libdbxml_java25d.pdb
  libdb_java48d.dll
  libdb_java48d.pdb
  xerces-c_3_0D.dll
  xerces-c_3_0D.pdb
  xqilla22d.dll
  xqilla22d.pdb
  zlib1.dll

  Now, I have this very simple program to test the installation:

  package milu.dbxml;
  import java.io.File;
  import java.io.FileNotFoundException;
  import com.sleepycat.db.DatabaseException;
  import com.sleepycat.db.Environment;
  import com.sleepycat.db.EnvironmentConfig;
  import com.sleepycat.dbxml.XmlManager;
  import com.sleepycat.dbxml.XmlManagerConfig;
  
  public class Test
  {
       public static void main( String[] args )
            throws FileNotFoundException, DatabaseException
       {
            File home = new File("C:/temp");
            EnvironmentConfig envConv = new EnvironmentConfig();
            envConv.setAllowCreate(true);
            Environment env = new Environment(home, envConv);
            XmlManagerConfig mgrConf = new XmlManagerConfig();
            XmlManager mgr = new XmlManager(env, mgrConf);
            System.out.println("klappt");
       }
  }

  Unfortunately, it does not run. I'm java.lang.UnsatisfiedLinkError. Take a look at run configurations (where the classpath is always correct) the following:

  java.library.path = %DbXml%\bin\debug
  
  :: java -Djava.library.path=G:\dbxml\bin\debug milu.dbxml.Test
  Exception in thread "main" java.lang.UnsatisfiedLinkError: no libdbxml_java25 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
          at java.lang.Runtime.loadLibrary0(Runtime.java:823)
          at java.lang.System.loadLibrary(System.java:1028)
          at com.sleepycat.dbxml.dbxml_javaJNI.<clinit>(dbxml_javaJNI.java:35)
          at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:55)
          at milu.dbxml.Test.main(Test.java:21)
  
  java.library.path = %DbXml%\bin
  
  :: java -Djava.library.path=G:\dbxml\bin milu.dbxml.Test
  Exception in thread "main" java.lang.UnsatisfiedLinkError: no libdb_java48 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
          at java.lang.Runtime.loadLibrary0(Runtime.java:823)
          at java.lang.System.loadLibrary(System.java:1028)
          at com.sleepycat.db.internal.db_javaJNI.<clinit>(db_javaJNI.java:38)
          at com.sleepycat.db.internal.DbEnv.<init>(DbEnv.java:264)
          at com.sleepycat.db.EnvironmentConfig.createEnvironment(EnvironmentConfig.java:3910)
          at com.sleepycat.db.EnvironmentConfig.openEnvironment(EnvironmentConfig.java:3863)
          at com.sleepycat.db.Environment.<init>(Environment.java:93)
          at milu.dbxml.Test.main(Test.java:19)
  
  java.library.path = %DbXml%\bin\debug + %DbXml%\bin
  
  :: java -Djava.library.path=G:\dbxml\bin\debug;G:\dbxml\bin milu.dbxml.Test
  Exception in thread "main" java.lang.UnsatisfiedLinkError: no libdbxml_java25 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
          at java.lang.Runtime.loadLibrary0(Runtime.java:823)
          at java.lang.System.loadLibrary(System.java:1028)
          at com.sleepycat.dbxml.dbxml_javaJNI.<clinit>(dbxml_javaJNI.java:35)
          at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:55)
          at milu.dbxml.Test.main(Test.java:21)
  
  java.library.path = %DbXml%\bin + %DbXml%\bin\debug
  
  :: java -Djava.library.path=G:\dbxml\bin;G:\dbxml\bin\debug milu.dbxml.Test
  Exception in thread "main" java.lang.UnsatisfiedLinkError: no libdbxml_java25 in java.library.path
          at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
          at java.lang.Runtime.loadLibrary0(Runtime.java:823)
          at java.lang.System.loadLibrary(System.java:1028)
          at com.sleepycat.dbxml.dbxml_javaJNI.<clinit>(dbxml_javaJNI.java:35)
          at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:55)
          at milu.dbxml.Test.main(Test.java:21)

  What is the problem with this configuration? Thank you.

  Then I would probably try to write a small test program that loads XML DB lib or other libs (dll) using System.load call (...). Try to load via the full path as well as just by name (these libraries that are also in the path or in the java.library.path).
  I just look at the code. First, it loads a library without a suffix ', then if JVM up UnsatisfiedLinkError, then the suffix would be "is added and it tries to load it again..."

  Very weird.

• My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.

  My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.

  fans on, power button flashing says "not enough RAM that works correctly for starting up".

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

  original title: library not registered

  When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

  ------

• Error 1606 when you try to update Java

  Original title: Error 1606? __

  When you try to update Java I get error 1606: location not found message from the network. I tried the offline update but get the same error. Any suggestions?

  http://Java.com/en/download/FAQ/remove_olderversions.XML

  "Can I remove older versions and I need multiple versions of Java installed on my system?

  http://Java.com/en/download/Inc/windows_new_ie.jsp

  'Download Java for Windows'

  I hope that the information above to fix the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Error - Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  Original title: my Media Player will not play the majority of my music files.
   
  Here's what he said
  "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

  There has been NO change to my other computer from so NY to AZ I have an internal but also external hard drive and I have so many files that I don't have the disks more and I don't want to lose them.  Any help will be greatly appreciated, thank you.

  Hi David,

  What version of Windows Media Player do you use?

  If you use Windows Media Player 11, you can follow the steps in this link & check if the problem persists.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  
  Reference: error message when you type the name of a file to play with Windows Media Player: 'Cannot open file'

  Hope the helps of information.
  Please post back and we do know.