WebVPN software package for AnyConnect
I'm trying to set up my router 2821 AnyConnect following the link below:
http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080af314a.shtml
I came to the next line but I can't find the package of webvpn anywhere on Cisco's Web site. I don't have a windows machine available to me so I can not use CCP, as this guide advises. I can only configure this via command line.
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
Can someone tell where I can find this webvpn firmware, so I can continue with the configuration? Or can someone give me another set of instructions to get this set up?
Thank you!
Hello
Jeffrey Simon napisano:
Thanks for the post. I just checked out your link. So if Iam to understand this correctly, if I am going to be having Mac and PC computers connecting via AnyConnect I would have to install the package mentioned above in addtion to "Web deployment package for Mac OS X "Intel" platforms" correct?
Yes, that's correct.
Explanation:
AnyConnect-victory - 3.1.03103 - k9.pkg-> of the Web deployment package for Windows platforms
AnyConnect-macosx-i386 - 3.1.03103 - k9.pkg-> of the Web deployment package for Mac OS X «Intel» platforms
AnyConnect-macosx-i386 - 3.1.03103 - k9.dmg--> package Standalone DMG for Mac OS X «Intel» platforms
AnyConnect-linux - 3.1.03103 - k9.pkg-> of the Web deployment package for Linux platforms
AnyConnect-predeploy-linux - 3.1.03103 - k9.tar.gz--> package stand-alone tarball for Linux platforms
AnyConnect-PreDeploy-Linux-64-3.1.03103-K9.tar.gz-> standalone package for 64-bit Linux platforms
Do you happen to have a better set of step-by-step instructions for getting the AnyConnect server running on my router? The instructions I was able to find are really GUI based and I am looking to deploy this via command line.
I found a few articles on the Internet, but I recommend Cisco documentation
Articles:
(I was not analyze these documents carefully).
Configuration of routers Cisco IOS Cisco AnyConnect VPN SSL (WebVPN)
How to configure Cisco SSL VPN aka WebVPN.
Cisco AnyConnect Tunnel with the CLI configuration
Cisco:
IOS 12.4 T-> 12.4 T - SSL VPN Configuration Guide
IOS 15-> SSL VPN Configuration Guide - 15 M & T
________________
Best regards
MB
Please note all useful posts
THX
Tags: Cisco Security
Similar Questions
-
Satellite L500-154 - how to get the software packaged for Win7
How can I get the software "Bundled" for Win 7, I will install Win 7 full (no updates), in the moment is runing Vista on the laptop
As far as I know, you can't have Win7 recovery media. Laptops ship with Vista can update only.
-
Impossible to install Picture Package for my Sony Handycam DCR-DVD305 because of Vista software
Try to install Picture Package for my Sony Handycam DCR - DVD 305. He continues to tell me that 'the wrong model name. Help! I have Windows Vista SP1. Anyone, please help!
Hello ZAFFIT,
Thanks for posting in the Microsoft answers Forum. I have sounds from you description you don't have device drivers appropriate for your particular camera. I suggest visit www.sony.com and searching for the right or update drivers for your camera.
Thank you
Jack
Jack
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Where can I download Apple Software Update for Windows 7?
Where can I download Apple Software Update for Windows 7? When update to iTunes, it appears "there is a problem with this Windows... "and I tried to fix Apple Software Update, but cannot find the .msi. file, I need to install it again.
See this tip for the user of one of our colleagues in the community:
See you soon,.
GB
-
Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT
Hello!
I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
I do the following:1. install Windows 7 x 64 SP1.
2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
3. install all updates of Microsoft Windows
4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.Here is the log for the first test (win7update.log) file:
12\28\2011 update started at 21:11
TVALZ_O.inf installed
E/s installed & memory access driver
driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
Updated at 21:29After the restart I've run it again and the result is:
12\28\2011 update started at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba value added package has already been installed.
Updated at 21:40Any help is appreciated!
Thanks in advance!Stand by.
What are you doing exactly?
You try to install own OS? -
Toshiba value added Package for Windows Vista Version 1.1.3 on Qosmio F45
I installed the new * Toshiba value added Package for Windows Vista Version 1.1.3 * for my Qosmio F45-AV413 and function keys was arrested for work.
If I don't go back to the previous system, there is no action that I can do to make the works of buttons again.
I tested with Vista Home Premium which is installed with the product, tested with Vista Business from scratch, and none of them work as expected.
Well, if someone could help me with this question I really thank you,
Marcelo.
Have you already tried to install an earlier version of the software function button on your system? I think the new version is buggy and if not already a newer version is released, you should have the old version until a new one comes out.
Please check if the old version works, it shouldn´t be a big problem for the single download from the Toshiba driver download site.
See you soon
-
Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.
The google toolbar is active it is not displayed any longer.
Hello
"a valid copy of the installation package for TrayApp.msi.
This is normally a problem with your HP printing software
Uninstall and reinstall the printer
and try this
http://www.ehow.com/how_5269744_remove-trayappmsi.html
Contact HP support
http://welcome.HP.com/country/us/en/contact_us.html
HP support forums
follow these steps
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
also run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
Hello, I want to give my opinion on currently managed plans. In my case, for example, I'm not a professional using these adobe products, much less I should "invest" their products (paying each month) and claimed no money because I myself don't dedicate to this. I wanted to express my opinion on this package should be some people like me who do not like to see us on the need to use products without paying (Yosemite) or something similar thing, there was a package for people like me who have time and for fun photoshop opens and changes an occasional photo , but only for this diversion. An idea that occurs to me is down the price maybe a new package with photoshop just or for the same price of $10 instead of a month at most or even guided by the principle that will not use both software (photoshop), one day had a certain period of time, for example, 2 hours per day Once finishing time must wait 24 hours, it's his approach only give my opinion on something that I think they must have.
If you do not want to buy a subscription to use Photoshop, you should consider buying Photoshop Elements numbered series
Photoshop Elements has a very active forum community: Photoshop Elements | Adobe Community
-
I'd like to buy software cleaning for my iMac.
I'd like to buy software cleaning for my iMac. I can't do it myself. Can someone please give me the names of good software for mac. Thank you kindly.
Roberta
< re-titled by host >
Your Mac does not 'clean up' and you must avoid software who claim that like the plague. Much of this software does more harm than good, and some of them are aggressive in pushing the upgrades and difficult to remove. Your Mac is quite able to keep clean, and if you have too many movies, audio files or photos you can remove them yourself.
-
I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?
Well, if you need older versions of firefox you can find them on this site:
- http://www.oldapps.com/firefox.phpBest regards, G-Cloud.
-
Problems trying to download the software Bonus for Centro
Hello
I recently bought a new AT & T Centro for my wife and was very excited to see the software available for download with her bonus. However, when I try to download, the site asks me to enter the serial number of the phone, but it gives me the message: "* Please enter a valid serial number."
I'm in one S/N that I can find on both the box and the phone.
Anyone know what I need to do?
Thanks for any help!
Can you PM me your serial number and I'll make sure it's the correct number and if there is something wrong with it see you get a different serial number to use to download the software.
Message relates to: Centro (Sprint)
-
Is there a software update for Airport Extreme? Random disconnect
Is there a software update for Airport Extreme? Random disconnection, have to keep unplugging it, done the hard reset, no change
Is there a software update for Airport Extreme?
No, if you ask for something 'new '.
You don't specify what model of AirPort Extreme you have, but if it's the current 802.11ac 'tour'-shaped version, the last update of the firmware was well over a year. Make sure you have the version installed on the AirPort Extreme 7.7.3 .
If you have an old 'flat' 802.11n or version "square" AirPort Extreme firmware update 7.6.4, who is 3 years and more.
Please specify on the version you have on your AirPort Extreme.
-
Software update for Xcode version 7.3... never blocks finished
Software update for Xcode version 7.3... never blocks finished on my MAC Book Pro Mid 2010
From the Store menu, please select
Search the unfinished downloads...
-
How can I get software, drivers for a 20 inch HP W2081d monitor for my MacMini
Mac Mini (mid-2010) 2.4 Ghz OS - X El Capitan 10.11.3 Version
Trying to find Mac software, drivers for HP 20 inch W2801d. HP provides software for Windows machines only, but refers to the update of the Apple software. Please let know us the problem...
If the back of the manufacturer does not provide the software for a Mac, so, none is required for a Mac
-
Sa20-S103 can't install software designed for Windows XP
Because I installed a service pack II - I had a problem with the installation of some software on my SA20.
Even with software designed for Windows XP. We have several PC's desktop and my SA20 is a laptop. All PCs have the same XP version with the same updates.So in my widows case gives the following warning:
C:\WINDOWS\SYSTEM32\CONFIG. NT. This file system is not appropriate to run MS-DOS or Microsoft Windows applications. Select a button 'Close' to terminate the application activity.Microsoft told me: Sorry, it's a problem with Toshiba Windows XP under System. They explained that in this case service pack II can work not properly in contact with the XP system redesigned for Toshiba. Who can help me?
Rafal
Hello
Check this link http://support.microsoft.com/?kbid=324767 please. I hope that there is the solution for you.
Maybe you are looking for
-
I created a new password. It brought me to this screen. Am I guess that something else. Thank you
-
Satellite L300D - how to connect to the WLan?
I'm not very good with this stuff. I bought this laptop yesterday with Vista & went about it today, but when I went off the wireless switch to, he went to orange, meaning wireless is disabled?And when I click 'connect to' no networks wouldn't come. I
-
HP Pavilion Elite HPE-400y: Out of control fan
A fan in my pc starts full speed at random. It does not matter whether I use the pc or it is just sitting and running. Any ideas on how to stop this? The noise is strong enough to interfere with telephone conversations. Is there a solution? Than
-
Networking Ethernet wireless adapter NIC - why it keep having be reset?
I have to constantly reset my router, as it drops my wireless connection? How can I permanently? IAM using Google as my browser
-
Product key does not work after the installation of Windows XP Media Center
I lost my CD of Media Center and borrowed a friends to re - install. I have the product key from the back of my machine. This machine was built by me, so I have the retail version of MCE. Any help would be greatly appreciated. Thank you Dave