Wechsel von Windows auf Mac the Abos during...

Similar Questions

• Windows cannot complete the installation during the passage in audit mode

  Hi all

  I was recently trying build a Windows 7 image for use in a high school lab.
  scenario until now:

  1.) configure WDS
  2.) use DISM to add any drivers necessary for the boot.wim and install.wim file
  3.) copied the files to the WDS server
  4.) installed Windows 7 x 64 enterprise on computer in the lab.
  (5.) to the menu screen post install (where it asks you to enter a user/computer name), I pressed Ctrl + shift + f3 to put the computer in audit mode to start putting in place a default profile.
  6.) after the reboot, I get the following message:
  "Windows could not complete the installation. "To install windows on this computer, restart the installation.

  After reading several posts I changed the SATA mode in the bios in legacy/IDE and tried installing again with the same result.

  I tried to install with a new download windows 7 directly from the DVD without integrated drivers, with the same results.

  I used DBAN to completely erase the hard drive and then tried installing twice with the same result.

  I tried to install it on another computer in the lab and still not received the same message.

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I recommend posting your question in the following TechNet Forum:

  http://technet.microsoft.com/en-us/ms772425.

• ICH möchte von windows auf imac umsteigen und following bisher mit dem Jahresabo as PS CC und LR, which ich vor 2 Wochen auch erneuert habe. ICH habe in meinen various Apps Swiss Pinselvorgaben, und Actions Presets, die auch immer bei ensure

  .. .MIT in meinen Apps included waren. Auf den imac habe ich den PS CC LR installed, die sind alle meine "gesammelten Werke" und weg. Wie ich sharp out asleep hinein?

  VIELLEICHT kann mir helfen someone?

  Danke schön once :-)

  your production files, you can simply copy from one computer to the other.

• Auf Photoshop Umstieg von Windows Mac

  Hallo,

  nutze currently eine Windowsversion von Photoshop. Nun möchte ich auf Mac umsteigen, da ich mir einen anschaffen möchte.

  Hands are wenn ich einfach die herunterlade und dann die eingebe Serienummer 11.2.x?

  Habe ein pass von Photoshop.

  Seriennummern sind plattformspezifisch, also wird das nix. Also go Pattformwechsel only for aktuelel versions, also CS6. However verwirrt mich, dass überhaupt von Seriennummern redest, aber ein Abo ACE. In dem Fall ware vollig out of way, weil das so oder so creative die Cloud App Sicherheit, mit der dich anmeldest...

  Mylenium

• How can I activate my CC on Windows and Mac at the same time?

  I installed the creative cloud on my Mac and on my Windows computer. On Mac, everything works fine, but on Windows I get the "start trial" button instead of "open" after the installation of any application. I'm connected with my account, but it says that there is no Abo for this product. What can I do?

  I tried to turn it off on my Mac but I can't always get access to applications on my Windows computer. He said there are 30 days trial left.

  Hello

  Please visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

• Hallo, habe Photoshop CS6 und LR as Windows. Möchte jetzt auf Mac umsteigen. ICH kann die auch program sleeps aktivieren.

  Hallo, habe Photoshop CS6 und LR as Windows. Möchte jetzt auf Mac umsteigen. ICH kann die auch program sleeps aktivieren.

  LR ja, nein PS.

  Exchange a product for a different version of the language or platform

  Mylenium

• Photoshop CS4 von Windows Macintosh Wechsel zu

  Hello

  ist der Wechsel einer Photoshop CS4 license von Windows zu possible MacOS?

  WO / man wurde wie die Software CS4 as MacOS bekommen?

  At wurde das ggf. Kosten?

  jele1012

  The link was useful.

  I had a conversation and the answer was: it is not possible to have an exchange of platform of CS4. I have to upgrade to a new version of photoshop.

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• About to transfer from Windows to Mac. Need tips and tricks regarding the transfer. That ExtHD does not need reformatting?

  Transfer from Windows to Mac. Need advice on the brand and model of HD Ext for compatibility which will not need reformatting? Advice welcome.

  If you want a HD post to be read by windows and Mac OS. The best choice would be the format ExFAT.

• When I use choose the partition Windows in MAC, it gives me an error code 0 x 0000225.

  When I use choose the partition Windows in MAC, it gives me an error code 0 x 0000225.

  I installed everything windows 10 on my macbook pro with the 2013 retina is ready, but the computer goes to windows it gives me an error, it tells needs me to be repaired

  need some help please and sorry I don't have a good English

  

  It gives me this error

• I can't download the application for mac windows phone. The message: you are interested in the content is now available in the store. How can I synchronize microsoft limia and macbook?

  I can't download the application for mac windows phone. The message: you are interested in the content is now available in the store. How can I synchronize microsoft limia and macbook?

  Contact Ms and ask them.  Only they dictate where their application is made available.

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.