Weighting filter

Similar Questions

• Mathscript weighting filter

  I am trying to apply a weighting filter in MathScript following the m-files found here.  My VI is attached, but the signal filtered of bilinear transformation is zero.  I do not have MATLAB, and I don't know what I'm missing.

  Hello

  It doesn't seem to be something to do because the filter coefficients are huge.  We will study this, but in the meantime, try the scale of values of the sampling frequency.  Change lines 20 to 23 in your MathScript node
  F1 = 20.598997/Fs;
  F2 = 107.65265/Fs;
  F3 = 737.86223/Fs;
  F4 = 12194.217/Fs;

  and line 31 to
  [B, A] = bilinear(NUMs,DENs,Fs/Fs);

  Grant M.
  Senior Software Engineer | LabVIEW MathScript | National Instruments

• SVT, weighting... filters arbitrary rate works but fixed rate does not

  Hello, I am a new user of LabView, but slowly get the hang of it through tutorials and help!

  I found that if I feed a waveform channel in a 'SVT A, B, C of weighting filter' VI, I get the result that I expect with the 'arbitrary' of the Filter version of rates, but no filtering seems to be applied if I use the version of rates "fixed".

  The data originally comes from an express at 10 kHz of VI DAQ Assistant.  It is a standard sampling (as indicated in the article of tips OR here), so I don't know why it should not work.

  While I have it works very well with the version of arbitrary rate of the filter, it is recommended to use the "fixed" version and I also try to understand why things are the way they are...

  Thanks if anyone can shed some light on it!

  It's good, I finally found the answer!  He has just occurred to me that sample only prices are supported by the hardware, and while I entered 10 kHz in the DAQ Assistant, I realize that he was actually giving me 10240Hz, is not a sampling rate 'standard' for what is the fixed filter is.

  This makes sense now, and I've learned something new.

  Thanks for your help :-)

• URL filter fails in userContent.css

  Linux x86_64, Firefox 28

  I have in my userContent.css:

  @namespace url(http://www.w3.org/1999/xhtml);
  
  @-moz-document domain(www.utro.ru)
  {
    * {
      font-family: "Arial" !important;
      font-size:   10px !important;
      }
  }
  
    * {
      font-family: "Verdana" !important;
      font-size:   15px    !important;
      line-height: 1.3em   !important;
    }
    h1, h2, h3, h4, h5, h6 {
      font-family: Verdana !important;
      font-size: 13px !important;
      font-weight: bold !important;
    }

  Is what I expected to see the 'www.utro.ru' with the Arial font and size 10 px
  Other pages - with the font size and 15px Verdana.
  But in reality Firefox draws each page with 15px Verdana.

  If I remove all other conditions:

  @namespace url(http://www.w3.org/1999/xhtml);
  
  @-moz-document domain(www.utro.ru)
  {
    * {
      font-family: "Arial" !important;
      font-size:   10px !important;
      }
  }

  Firefox starts to draw is expected - 10px Arial.
  Other pages with the default font configuration.

  Is this another bug or I did something wrong?
  Firefox does not include a url filter condition!

  
  

• Filter of time domain frequency domain filter

  Hello

  I am applying the weighting filtering of an audio signal.

  I'm to draw the response of the filter in the frequency domain.

  How can I turn this into a time domain filter and use it with a real audio signal?

  In theory, it's pretty simple. You take the s-domain transfer function and apply the bilinear transform. After a few edits, you can extract the coefficients 'food for animals-descendant' as well as the coefficients "feed-forward". These coefficients can serve as input of the filter of Labview functions. As I said, the theory is simple, but I think it will be a tough job to do this. Weighting is used in the measurements of the sound level, to mimic the curve of the human ear. If you plan to use spectral analysis in your application, you can skip the filter and apply your formula for your spectrum frequency bins. In this way, you can save a lot of work, because you stay all the time in the frequency domain.

• Weighted Bandlimited a calculation of rms noise

  Hi all

  I want to calculate the band including a weighted rms noise.   I'm able to calculate noise from rms to an analog signal without any bandwidth limitation.  Find the attached vi for details.  I want to limit the bandwidth to some known values (say 20 Hz to 20 kHz) and then calculate the rms noise.

  Please advice.

  Thank you best regards &,.

  Siva

  Siva,

  What is the problem you are having?

  I do not have the Sound and Vibration Toolkit, but when I replace it with a filter from the palette of Signal Processing, I get changes in bandwidth and in the calculation of rms.  The RMS.vi of the mathematics > probability & statistics palette produces the same value you use the VI of statistics. Based on average DC - RMS.vi Signal Processing > range of measures of waveform produced smaller values on the 3 orders of magnitude.

  Lynn

• How can I filter the noise of a signal?

  Hello

  I wonder if someone can point me in the right direction.

  I got the task to analyse the signal from a load cell, measuring vertical efforts on a buoy in the ocean waves. All I have are data files - Earth "calibration" run and a period of measurement of forces in the water. They are both simply traces time force vs. time. Calibration run consisted of hanging weight of the load cell. The problem is that the signal is very noisy, with a +/-10% fluctuation around the average. I don't see any particular model or the periodicity for the noise, but there may be something there.

  As a mechanical engineer, I don't know a lot about the signal processing, but I think there may be techniques to characterize the noise and filter it essentially leave the signal of interest (buoy in the water). I tried to run Fast Fourier Transforms of the calibration and signals live (in MS Excel), but they gave me a huge spread of frequency component, some with puzzlingy large amplitudes. Can anyone suggest alternative approaches or indicate where I have gone wrong?

  Thank you.

  What are the software tools you have at your disposal to achieve this? Using LabVIEW? What is the sampling frequency of your signal?

  The first thing to look for are the functions of filter and start by using a simple low pass filter (for example: Butterworth filter). In view of your signal, you expect the signal to be less than 1 Hz, so put 1 Hz as the crossover frequency. Who should get rid of a lot of noise already.

• Create the custom using elements of Page filter

  Hello

  I am trying to create a custom of sorts using page elements filter date picker.

  I want a report to have a where clause clause that says something like this:

  WHERE the table. Date >: P1_Date1

  AND the table. Date..: P1_Date2

  I need to do it this way because I need to have another area that displays the weighted average on the basis of 2 of the columns in this table set and I was unable to find a good way to make a weighted average using the interactive report options.

  The question just the other side is that I can not simply refer text buried user to a static source page element. I used radio groups before where the change they had an action "refresh and set the ' enabled me to make reference to them, but I don't see how to do something like this with the dates selectors.

  Any ideas on how I should go about it?

  EDIT:

  I've included an example of what I am trying to accomplish.

  Link- https://apex.oracle.com/pls/apex/f?p=30262:101:102700562633003:

  Username - TESTER

  PW - Tester

  JaReg wrote:

  Partitions tab person and date shows the page that I create. Currently the regional report and the Middle regions "Totaled" are implemented using the Radio top unit

  I want to do the same thing with the dates selectors, but previously I was unable to get the selectors of dates static to use in a sql requpete as I can with the Group of radio buttons.

  I created the page 586 as a copy of the original, with the following changes:

  1 has changed the Page Action sélection P586_PERSON point filter parameter of redirection and set the value None.

  2. added explicit Format mask to DD-MON-YYYY to filter items date picker.

  3. change the source of the region of results reports to:

  select
      *
  from
      scores s
  where
      s.person = :p586_person
  and s.scoredate between to_date(:p586_mindate, 'dd-mon-yyyy') and to_date(:p586_maxdate, 'dd-mon-yyyy')
  

  4. define the region of results reports the Items property of the Page to be sent to P586_PERSON, P586_MINDATE, P586_MAXDATE. What causes the values of these elements to present before a partial page refresh is performed on the region, making them available in session state when the content of the region is updated.

  5 created a dynamic change on the region of filter action:

  Event: Change

  Selection type: Region

  Region: Filters

  Action: Discount

  Fire on Page load: NO.

  Selection type: Region

  Region: Reports of results

  The region of IR report Score is now automatically updated each time that one of the elements in the region of filters are changed. That leaves the data region totaled. As a static content area may not be automatically updated by a dynamic action of PPR, and I'm not so sure as rules that must be used to apply filters to the values of the region. The same range filters in person and date should apply to the total values as are used in the report?

• How to add / remove UOMs of NET, TARE and GROSS weight on the business page?

  How to add / remove UOMs of NET, TARE and GROSS weight on the business page?

  I've also attached the screenshot of what I want to add / remove.

  I am currently using v6111.11

  Please do the needful.

  Thank you

  Nefertari

  You can set up your display of the user interface by using the user interface extensibility. You can learn more about the extensibility of the user interface in the Pack of extensibility.

  Here is an example of javascript that you can use to filter the fields weight gross and net.  You can add a var and tare weight.  The script is the targeting of fields based on their identification. You can find their identity papers using the tools of the developer of the browser. For example, the tare weight UOM dropdown ID is "ctl01_CtlPackagingAttributeCU1_ctlCollapsibleContentContainer_ctl00_ddTareWeight" you can find all the pkids GLU in the UOM db table.

  Make sure you have no business page in the system with all UOMs filter you selected.  If so, these selections will be lost.  You can further customize this script to include the selected UOMs if you prefer.

  ----------------------------------------------

  function filterUOMs() {
    var NetWeightAllowedUOMs = ['',
  '2125C9F3D300-AA30-446E-8332-F177CD142950','2125B86219F3-9C78-4a6e-ABD2-506D34BCE275','2125AAC32296-A303-4d7f-B4EF-BA2003573D3E','21257FBD57ED-79FC-44be-8F0D-82E4045ACDD1','21252CEBFF48-9690-408c-AA79-6B7CAAA35D0A','21250E2887F6-6A3E-4862-A7FD-BDCDF75A404D','2125042958D3-E33A-4537-B029-098D065AF1A3','21256C0CC1E3-378A-43bd-B6E2-F7A0A23B42DA','2125586D8B32-95B9-4ebe-BDC1-285420735436','21255703D0DF-B497-4400-A716-38D674693954','21251C1A1522-134D-45a4-BC6B-6E3DEA51F740','212514d3bd78-29b3-495a-a852-3028f0a60b34'];
  
  var GrossWeightAllowedUOMs = ['',
  '212514d3bd78-29b3-495a-a852-3028f0a60b34','21251C1A1522-134D-45a4-BC6B-6E3DEA51F740','2125586D8B32-95B9-4ebe-BDC1-285420735436'];
  
    var majorNetWeight = $("select[id='ctl01_CtlPackagingAttributeCU1_ctlCollapsibleContentContainer_ctl00_ddContainerNetWeightMajor']"); // find Container Net weight major UOM drop down
    if (majorNetWeight.length > 0) { // if drop down exists, compare each option and remove those not in allowed UOMs
    majorNetWeight.find('option').each(function () {
    if ($.inArray(this.value, NetWeightAllowedUOMs) === -1)
    {
    $(this).remove();
    };
    });
    }
  
    var minorNetWeight = $("select[id='ctl01_CtlPackagingAttributeCU1_ctlCollapsibleContentContainer_ctl00_ddContainerNetWeightMinor']"); // find Container Net weight minor UOM drop down
    if (minorNetWeight.length > 0) {  // if drop down exists, compare each option and remove those not in allowed UOMs
    minorNetWeight.find('option').each(function () {
    if ($.inArray(this.value, NetWeightAllowedUOMs) === -1)
    {
    $(this).remove();
    };
    });
    }
  
    var GrossWeight = $("select[id='ctl01_CtlPackagingAttributeCU1_ctlCollapsibleContentContainer_ctl00_ddCUGrossWeightUOM']"); // find Container Net weight minor UOM drop down
    if (GrossWeight.length > 0) {  // if drop down exists, compare each option and remove those not in allowed UOMs
    GrossWeight.find('option').each(function () {
    if ($.inArray(this.value, GrossWeightAllowedUOMs) === -1)
    {
    $(this).remove();
    };
    });
    }
  };
  
  $(document).ready(filterUOMs);  // execute filtering when page is loaded
  Sys.WebForms.PageRequestManager.getInstance().add_endRequest(filterUOMs); // execute filtering when a section is refreshed, like clicking gross weight calc
  

• BW filter, how to apply a glance to only part of the image?

  Lets say, you like the way the BW filter looks for the body of a person, but not the face. What do you do?

  You cannot paint with the mask like that simply bring color back. Thank you.

  Use the adjustment of body weight, as C layer gently recommend, apply a mask to it.

• I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

  I can't print after upgrade to MacOS Sierra, always shown "cannot filter. I use AirPrint for Epson L355. Tried to reset the printer settings, uninstall and then install the printer, always in vain 'filter '.

  I think it has something to do with MacOS Sierra 10.12.1 Beta (16B2333a). Help, please!

  Update to the Sierra officially released

• Printer "filter failed" for macOS Sierra?

  Hi all

  I have upgraded my iMac and MacBook Pro with the new macOS Sierra and did not have a lot of problems until recently. As my exams are approaching, I print on my printer, Canon E560 comments. However, recently, some pages may not be printed and printing stops. He said "stopped -"filter"failed", and I can't find a way to solve this problem. I did this experiment several times, and in early printing, it is said immediately that the filter is not on my computer, but continues to print up to a page where it stops. Some pictures on the already printed pages are distorted. Is this related to the Sierra macOS? This is true for my two computers. I replaced the cartridges of ink, but in vain. I've also sent cannon on it, but they take a lot of time to answer me.

  I have another printer on the floor in my house, which is of my fathers. So, I tried printing with it, but words have white lines through it, for some pages. This shows that it may be a problem with the document or the software, macOS Sierra 10.12.

  For two printers, it seems that the content of the pages is pushed down as well.

  Thank you very much

  Ethan

  Have you looked for a new driver for your printer? Canon are responsible for updating the drivers for their products to ensure that they are compatible with the new operating system

• Automate the cells of the filter to another table based on two columns

  Hello

  What I'm trying to do is: filter multiple cells to a new table. In this example, I want that all students (column 'lidnr', 'city', then the first 7 columns) with 1 teacher in the 'First' column to be copied into the table 'teacher 1'. The same goes for students per 1 teacher in the column "second". I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document.

  

  

  I've been using maybe to think the search formula but he can't give me more than one result, the result must be unique.

  Thank you very much for your help.

  Kind regards

  Kim

  Hi Kim,

  The usual way to do this is to add an index for each table for which column the data is to be copied.

  Here is an example of preliminary. Improvements after return from the light of day.

  

  Triangles of error on the last row of T1 are thanks to the formula out of data to search for. Easily fixed.

  Order of the names is different from your example, which is grouped by day numbers. Build lists in the desired order, rethinking the index calculations.

  Course index calculations use the formula below, entered in Table 1::L2 and thre to the rest of the blue full cells filled.

  L2: = IF (OR (RIGHT($H2,1) = RIGHT (L$ 1.1) RIGHT($J2,1) = RIGHT (L$ 1.1)), MAX(L$1:L1) + 1"," ")

  Data recovery on the Table T1 is well done by the following formula, entered in A2 and down and B2 and filled and down-filled.

  A2: = INDEX (array 1::A, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  B2: = INDEX (array 1::B, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  More tomorrow (actually, later today).

• Since the upgrade to Sierra, Mail will not recognize or filter spam

  I'm having the problem where almost nothing goes in my junk e-mail folder. I rechecked my mail spam filtering preferences and I have it configured to enable filtering and move the Junk to junk e-mail folder. Those are the only two boxes checked. That the mail comes, I have systematically report as junk, but no matter how many times I do that junk mail is still not reported as spam in the future, nor is it place in my spam box. I really don't know what to do at this point.

  RE-INDEX YOUR SPOTLIGHT CACHE FILES

  In the Apple menu, choose System Preferences.

  * Click on the projector.

  Make this mail and Messages is enabled on the results tab of research.

  * Click on the Privacy tab.

  * Drag your player to the list. Wait a few minutes.

  * Remove the item you added.

  * Projector will be re - index the content of the element that you initially dragged to the list.

  Begin the recovery disk by pressing command + R during restart.

  Open disk utility and run first aid for your Macintosh HD (internal) and volumes given by you.

  The reboot: click on Mac OS X Installer in the upper left, and click on Quit in Mac OS X Installer. Click Startup disk. Click your primary hard drive, and then click Restart.

  When you restart Spotlight will re-index your entire drive.

  accept this warning). When you type your password, it will look like nothing is typed. It's normal. Once you type your administrator password, press return.

  SUMMARY:

  Depending on your Mac and the contents of his hard drive, the re-indexing may take several hours. This night is a good option if you have a large drive.

  Open the activity monitor in Applications/Utilities and type md in the search filter. You should see the files of mdworker process. This shows Spotlight indexing of your files. Until this process is complete, Spotlight will not know the contents of your discs and will not send mail.

  With Mali leave...

  Go to the library to the user

  Scrolling in containers

  Delete com.apple.mail folder.

  Scrolling in mail > V4 > MailData

  Find the 3 files with envelope in the name.

  Delete the files.

  Log Out under the Apple in the Menu bar

  Open a session

  Open mail

  Mail will be re-index your files.

  It is possible, that you will also need to re-index your Contacts.

  Let me know if it helps.

• Message error "arrested -"filter"has failed."

  After upgrading to Mac OS Sierra, when you attempt to send a test print my Epson Stylus Photo 2200, I get the message error "stop -"filter"failure" in my print queue.

  

  I have left clicked on the printer-> error log menu item, and I have the following in the error log.

  E [27/Sep / 2016:10:04:40-0500] [Job 3] Job is stopped due to errors in filter; For more details, see the error_log file.

  D [27/Sep / 2016:10:04:40-0500] [Job [3] the following messages have been saved since 10:04:38 to 10:04:40

  D [27/Sep / 2016:10:04:40-0500] banner of start-up [Job 3] adding page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] queued on the "EPSON_Stylus_Photo_2200" by "derekberube".

  D [27/Sep / 2016:10:04:40-0500] file [Job 3] seized automatic...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] request file type is application / vnd.cups - banner.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] file of type application / vnd.cups - banner in queue 'derekberube '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end banner add page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] time to processing = 1474988678

  D [27/Sep / 2016:10:04:40-0500] [Job 3] 3 filters for task:

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgbannertopdf (application / vnd.cups - banner to application/pdf, cost 33)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster (application/pdf in the application / vnd.cups - raster, cost 100)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (application / vnd.cups - raster to printer/EPSON_Stylus_Photo_2200, 0 cost)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] job-sheets = none, none

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [0] = "EPSON_Stylus_Photo_2200".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [1] = '3 '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [2] = "derekberube".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [3] = "testprint.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [4] = "1".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [5] = "AP_ColorMatchingMode = AP_VendorColorMatching AP_D_InputSlot = nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName = testprint com.apple.print.PrinterInfo.PMColorDeviceID... n. = 23775 com.apple.print.PrintSettings.PMCopies... n = 1 com.apple.print.PrintSettings.PMCopyCollate... b. com.apple.print.PrintSettings.PMFirstPage... n = 1 com.apple.print.PrintSettings.PMLastPage... n = 2147483647 com.apple.print.PrintSettings.PMPageRange... a.0... n = 1 com.apple.print.PrintSettings.PMPageRange... a.1... n. = 2147483647 fit-to-page media = letter requested by pserrorhandler = standard job-uuid=urn:uuid:8781dff0-21e9-31ef-5b09-534d193452be job-originating-name of host = localhost to-date-time-create = date-time-to-processing = time-to-creation" time processing 1474988678 = 1474988678 = document-name-supplied testprint PageSize = letter»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [6] = "/ private/var/spool/cups/d00003-001.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [0] = "< CFProcessPath >".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [1] = "CUPS_CACHEDIR = / private/var/spool/cups/cache '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [2] = "CUPS_DATADIR = / usr/share/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [3] = "CUPS_DOCROOT = / usr/share/doc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [4] = "CUPS_FONTPATH = / usr/share/cups/fonts.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [5] = "CUPS_REQUESTROOT = / private/var/spool/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [6] = "CUPS_SERVERBIN = / usr/libexec/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [7] = "CUPS_SERVERROOT = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [8] = "CUPS_STATEDIR = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [9] = "HOST = / private/var/spool/cups/tmp".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [10] = "" PATH = / usr/libexec/cups/filter: / usr/bin: / usr/sbin: / bin: / usr/bin ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [11] = "[email protected]".

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[12]="SOFTWARE=CUPS/2.2.0 ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [13] = ' TMPDIR = / private/var/spool/cups/tmp ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [14] = "USER = root"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [15] = "CUPS_MAX_MESSAGE = 2047"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [16] = ' CUPS_SERVER = / private/var/run/cupsd.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [17] = "CUPS_ENCRYPTION = IfRequested"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [18] = 'IPP_PORT = 631'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [19] = "CHARSET = utf-8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [20] = "LANG = fr_FR. UTF - 8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [21] = "APPLE_LANGUAGE = en - en"

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[22]="PPD=/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [23] = "RIP_MAX_CACHE = 128 m"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [24] = "' CONTENT_TYPE = application / vnd.cups - banner" "

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [25] = "DEVICE_URI = 0 usb://EPSON/Stylus%20Photo%202200?serial=L5602021107061925"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [26] = "PRINTER_INFO = EPSON Stylus Photo 2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [27] = "PRINTER_LOCATION = MacBook Pro Derek Berube\"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [28] = "PRINTER is EPSON_Stylus_Photo_2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [29] = "PRINTER_STATE_REASONS = none"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [30] = "CUPS_FILETYPE = document"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [31] = "" FINAL_CONTENT_TYPE = vnd.cups - raster/application ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [32] = "AUTH_I."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgbannertopdf (PID 2075)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 2076)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgpdftoraster (PID 2077)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 2078)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started backend/usr/libexec/cups/backend/usb (PID 2079)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] Message catalog filename is \"/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framework s/PrintCore.framework/Versions/A/Resources/English.lproj/cups_apple.strings\.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_banner(filename=\"/private/var/spool/cups/d00003-001\")

  D [27/Sep / 2016:10:04:40-0500] [Job 3] usb: AppleLanguages =-"en - US\".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + connection-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] looking for \'EPSON Stylus Photo 2200\'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] open connection

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2078 (/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacO S/rastertoescpII) was arrested with the 206 State (output Interface queue is full)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Tip: try to set the LogLevel "debug" to learn more.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Page = 612 x 792; 9.40 at 603-783

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin ' permissions OK (040755/uid = 0/gid = 80).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / System/Library/Printers/Libraries/USBGenericPrintingClass.plugin ' permissions OK (040755/uid = 0/gid = 0).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0 x 00000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin) (kr:0 x 00000000)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: copy to temp \"/private/var/spool/cups/tmp/0081d57f93b5a\ print file '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE:-connecting-to-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sending data to the printer.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sent 0 bytes...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + cups-wait-for-work-over

  D [27/Sep / 2016:10:04:40-0500] [Job 3] align for banner 1.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2075 (/ usr/libexec/cups/filter/cgbannertopdf) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2076 (/Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdf topdf2) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: \"/private/var/spool/cups/tmp/0081d57f93b5a\"has 1 pages.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: open \"/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd\ file PPD «...»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: PreferredRotation = - 90

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsPageSize = [612 792], cupsImagingBBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width = 612, length = 792, high = 9, low = 40, left = 9, right = 9

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970, cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: colorspace = 1, bitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: the seller matching mode is turned on and the requested transfer color space is sRGB.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: skipBytesPerRow = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bandwidth = 2970, bytesPerRow = 11888, band height = 3715, height = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width of the frame = 2970, height = 3715 bitsPerComponent is 8, bitsPerPixel = 32 bytesPerRow = 11888, bitmapInfo = 5, resolution = (360.000000, 360.000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] HWResolution = [360 360]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] ImagingBoundingBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] margins = [9-40]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PageSize = [612 792]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerPixel = 24

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBytesPerLine = 8910

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: rasterWriteHeader: unable to write the header streams raster: Broken pipe

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bytes written for the side 1 = 0, err = 5

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2077 (/ usr/libexec/cups/filter/cgpdftoraster) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] waiting for read thread exits...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2079 (/ usr/libexec/cups/backend/usb) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end of messages

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer - state = 3 (idle)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer-State-message = "Sending data to printer."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] - printer-motivation = none

  Line 66 # in the above seems to indicate the rastertoescpII utility failed with a status code of 256 and the error message "output Interface queue is full.

  Troubleshooting steps

  To try to solve this problem, I followed the steps described in the article «problems of printer on your Mac»  I have reset the printing system and it does not work.  I have also unplugged the printer, deleted the contents of the folder/library/printers/and then plugged the printer into.

  You will need to check with Epson to see if there is a new driver for your device compatible with macOS Sierra. The old drivers are not compatible. Even with the new driver, some people state that the error is not fixed :-( YMMV.