Weird bug Simulator runs several applications of JQuery

Similar Questions

• Satellite L100-120 cuts of sound when running several applications

  I don't know if it is a software problem, but I'm pretty sure that it is. I have an a L100-120 recently, I have not had problems with it. The problem occurred when I tried to use the laptop speakers anymore.

  At first I noticed sporadic sound interruptions when several applications are running (especially Yahoo Messenger). I thought that it was because of the CPU and memory load and I chose to ignore the problem. A week before, while I was listening to music in Winamp, speakers for laptop (Yes, I have a headset, but sometimes, I feel the need to use the speakers) serious interruption occurred on the noise and I was forced to close two processes in a forced manner.

  Then, at each reboot, the Windows theme song was interruptions and grew every song that I played, no matter what I had programs open, and regardless of whether or not I used the speakers.

  I reformatted the HD and the problem disappeared. Unfortunately, today, I met the same problem, the same Messenger - situation of winamp and everything has stopped working properly again. At each reboot Windows high loading times and every song I play interruptions, even if the RAM memory seems rather free.

  I tried: defragmentation, clean registry, anti-virus, own system process...

  I don't know if there is a real problem of YM.

  Hello

  A question: did you play music files from the HARD drive?

  If yes yes maybe that's the problem. I think the noise interrupts because more enforcement are running and access the HARD drive Assembly.

  But it is not if you listen to just the music without running applications?
  It happens if you play the music from the CD?

• cRIO run multiple Applications?

  Is it possible to run multiple applications on a target cRIO?  Would they all need to be part of the same project in LabVIEW?  Can I set more than one as a starting VI or need to create a VI that would start up individule applications?  They are the basics of Ethernet and not to use or share any what I/O.  I looked around, but didn't see much information on this subject.  Thank you!

  Good afternoon Matt,.

  It is possible to run several applications on a target of cRIO as long as they are in the same project and do not exceed the capacity of the target memory. You can only mark a VI the sixth start-up, but, as you said, you have this VI call your other applications. You can find useful the following documentation:

  Programmatically launch an executable file or VI on a real-time controller

  http://digital.NI.com/public.nsf/allkb/A7DBA869C000B5AE862570B2007C4170

  Using VI server to run LabVIEW VI real time stored on a hard drive of the RT series

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4364

  Getting started with the Module time real LabVIEW

  http://digital.NI.com/manuals.nsf/WebSearch/12F0FF18FB1BB533862575AD00696100

  I hope this helps!

  -Ryan S.

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• running an application on the Simulator

  got this message when you try to run my application.

  "" launch firstappproject the device debugging"has encountered a problem.

  There is no such thing as the specified program in the launch configuration file.

  How can I fix this so I can run my application?

  I would like to begin by ensuring that you have built the version of the application you are trying to run.

  1. In the Project Explorer, right-click on your project and select Build Configurations > Set Active > Simulator Debug.
  2. Now build your project by right-clicking on your project and selecting build the project.
  3. Make sure you use the correct type of version on the Simulator going on run > Run Configurations... on the Momentics menu bar. On the main tab, make sure that Build configuration: is set to Simulator-Debug.
  4. Type a name for the run Configuration if you have not already.
  5. Click run.

• Impossible to run my application on Z10 Simulator

  Hello

  I tried to run my application built on 10.1.0.1020 SDk on my Z10 Simulator, it did not work. Then I checked my Z10 Simulator and the version was 10.0.9.1673 which is older than my SDK. I tried on my Simulator of Q10 and it worked. If im a little confused here. Should I update my OS Z10?

  Momentics should provide the 10.0.9.1673 SDK in the update section. It is installed in my Momentics. However, if it is no longer supported you can install a later version of the SDK and a later version of the Simulator. The last Z10 Simulator should be 10.0.10.822.

• Method of application for process by running several times question

  Hi all

  In my controller code, application of process method is run several times, and insertion of multiple data in the table, any body can help me how to solve this problem.

  I have the code in my application process below:

  OAApplicationModule m = pageContext.getApplicationModule (webBean) (OAApplicationModule);

  am.invokeMethod ("InsertRecord", null);

  OAMessageLovInputBean oalovinputbean = (OAMessageLovInputBean) webBean.findIndexedChildRecursive ("ccustatus");

  oalovinputbean.setValue (pageContext, "INPROGRESS");

  String userName = pageContext.getUserName ();

  System.out.println ("username is:" + username);

  OAMessageTextInputBean pUserId = (OAMessageTextInputBean) webBean.findChildRecursive ("item32");

  pUserId.setValue (pageContext, userName);

  OAMessageTextInputBean pchangedby = (OAMessageTextInputBean) webBean.findChildRecursive ("item34");

  pchangedby.setValue (pageContext, userName);

  If ((("on").) Equals (PageContext.GetParameter ("rrchkbox")))

  {

  String whereclause1 = (String) pageContext.getTransactionValue ("whereclause");

  String workordnum = (String) pageContext.getTransactionValue ("workordnum");

  String rrnum = (String) pageContext.getTransactionValue ("rrnum");

  String ponum = (String) pageContext.getTransactionValue ("ponum");

  System.out.println ("whereclause test1" + whereclause1);

  String status = pageContext.getParameter ("ccustatus");

  System.out.println ("CLEMENT LINE STATUS:" + status);

  Serializable param [] = {workordnum, rrnum, whereclause1, ponum};

  am.invokeMethod ("getSearchData1", param);

  am.invokeMethod ("checkSelectedrow", param);

  Vcnt serializable = am.invokeMethod ("processPOData", param);

  }

  Below the code written in AM:

  Public Sub InsertRecord()

  {

  XXDPECONTAINERVOImpl vo = getXXDPECONTAINERVO1();

  vo.setMaxFetchSize (0);

  Line XXDPECONTAINERVORowImpl = (XXDPECONTAINERVORowImpl) vo.createRow ();

  oracle.jbo.domain.Number empNum = (oracle.jbo.domain.Number) getOADBTransaction () .getSequenceValue ("XXDPE_CONTAIN_SEQ");

  row.setContainerizationId (empNum);

  vo.insertRow (row);

  row.setNewRowState (rank. STATUS_INITIALIZED);

  }

  Please help me.

  Thank you Manu for your answer, my question set, in fact it was I have attached several region in the page controller, so whenever the page load is run 3 times and the call to the insert 3 times, so I corrceted it now is workign fine.

  Thnaks

  Deb

• What does it mean when I connect to Facebook and a pop-up out saying ' [JavaScript Application] error: jQuery ("#fb_menu_account", document) .attr ("href") is not defined?

  What does it mean when I connect to Facebook and a pop-up out saying ' [JavaScript Application] error: jQuery ("#fb_menu_account", document) .attr ("href") is not defined? I would like to know what I can do to solve this problem. The site will end up running slow. I tried to clear cookies and cache, but it does not work.

  URL of affected sites

  http://www.Facebook.com

  Fact is always happen in Mode without failure of Firefox. See questions to troubleshoot Firefox in Safe Mode.
  If so, it is probably caused by an add-on.

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• Several applications have frozen or stopped working after connecting to the server for a few minutes

  Hi all

  I am facing the problem with my windows server 2012 R2. After I connect to the server and leave it there for a few minutes:

  • Some of system applications such as device, power, system, etc. Option Manager are stopped working. When I opened them, I have nothing.
  • All my applications c# (.Net Framework 3.5 ~ 4.5) was an error 'could not load file or assembly 'my_reference_libraries' or one of its dependencies. The system cannot find the specified file. ». I'm sure that's not the error I can run the application correctly before this problem occurred.
  • When I open "Manager configuration SQL Server 2014", I get the error "the instruction at 0x0023ae20 referenced memory at 0 x 00000058. The memory could not be read. »

  Strange thing is when this is the case, I can open "Event Viewer" and after opening, everything back to normal. I can open applications, including my c# programs without any error. It's not just my guess that I tried this work many times. Opening every time the "Event Viewer" has solved the problem. There may be other applications system who will be doing that job, too, but I have not tried everything.

  In case the Viewer, I got tons of errors for:

  • GroupPolicy - Group Policy processing failed. Windows could not apply the policy settings based on the register of the LocalGPO Group Policy object. Group Policy settings will not be solved until this event is resolved. View the event details for more information on the file name and path that caused the failure.
  • DistributedCOM - the server {06622D85-6856-4460-8DE1-A81921B41C4B} is not registered with DCOM within the required time.

  What could be the problem? My user session froze? I get trouble solving this for several weeks already and still got no chance.
  Any help would be greatly appreciated!

  Please advise!

  Thank you and best regards!

  Hello

  Any recently installed application? Examine the cpu and memory use?

  Let me you suggest reviewing your material, including memory. Added new hardware recently? A updated driver recently? Please update hardware drivers.

  The following forum might be more appropriate for your question:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• Error: ' ATL. DLL was not found"when trying to run any application.

  Original title: ATL. DLL was not found.

  I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

  Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

  I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

  If the atl.dll file is missing, sfc/scannow will launch but it does not work.

  It's just another wild goose chaseSupport Engineer.

  A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

  You try to run the system restore, you see the following message is displayed:

  Rstrui.exe - Unable to locate component
  The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

  Try to open the event viewer, you see a message like this:

  MMC could not create the snap.
  MMC could not create the snap.  The snap-in may not be installed correctly.

  Name: Event Viewer
  CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

  Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  You can't get on the Internet using any browser.

  You have to somehow replace the missing or damaged file.

  The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

  You can search Windows on your system for ATL DLL and replace the missing file.

  THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

  Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

  The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

  c:\Windows\System32\dllcache
  c:\windows\system32\ServicePackFiles\i386

  Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

  Answered in the affirmative if invited to replace the existing file.

  There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• How to run an application associated with 2 different versions of MFC?

  Hello

  I created an application that generates a DLL with an EXE which refers to several delivered runtime DLLS. The DLL and EXE have been built with VS2012, and the DLL of enforcement delivered have been built with VS2010. When I try to run the application, I get an access violation in WinMain (calling AfxGetThread returns null). Just to check the application, if the supplied runtime DLLs were also built with VS2012, the application runs correctly.

  My goal is to run the application without restoring links there.

  Is it possible to use a manifest configuration, using the file and change references to the VS2010 (made by the runtime DLL) to VS2012, so that the application can be run without the restoration of the links?

  Here is the config file that I created, but did not succeed:

  
    
       
          
             
             
             
             
          
       
    
  

  I don't know if the assemblies Microsoft.VS100.MFC and Microsoft.VS100.CRT names are actually valid and also don't know if I can redirect between major versions of VS.

  I was not able to find examples of work. Any help would be useful.

  Regards, Rob

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Cannot run more applications if you do not use "Debug".

  Hi all

  I currently have a funny problem with beta3.

  When I try run my application via 'Run' the app stucks at the splashscreen 'BlackBerry '. When I use "Debug" it works. Happens on the device and in the Simulator. I have also no log of messages and error.

  To test, I created a new project with the Standard model. Doesn't change anything and I tried to launch it on the 10.0.9.386, Simulator, didn't work. Tried on the Alpha of Dev, does not work either.

  Runs the application in debugging in circuit mode I get the Label "Hello World".

  I am on Mac OS 10.8.2 and upgraded to XCode 4.5 today, but I do not know if what counts.

  Someone knows how to fix this?

  Sorry, but now I restarted complete system, not just the Simulator and Momentics. Now, he still works once, funny.

• Smartphones running blackBerry applications

  Hi people,

  How can I see a list of applications that are running on my Curve 8900?

  Applications stay running when you close them? I recently installed the Myspace and noticed just now that I was always connected and even if I closed the window, I had to log out of the it function menu.

  Thank you

  More no matter what screen > Menu > switching Applications.

  There are several applications that will always run in the background: Home screen, messages, phone, BlackBerry Messenger and the browser.

  Ensure that the browser is not on a web page active.

  To close an application, always choose the Menu > close or exit.

• I can train the UAC? I regularly run several programs and UAC asks EVERY TIME if that's OK.

  I regularly run several programs and UAC asks EVERY TIME if that's OK.

  UAC is designed to collect want programs run without my permission.  Why can't have a list of programs that are allowed to run without hindrance when I'm the one initiating this shit to begin with?

  As far as I KNOW, there are four scenarios in which UAC does not:
  • When it is off (obviously!)
  • When the actions of the programme are not potentially dangerous.
  • When a program is run under a high count.
  • When the program is running under the system account.

  Your statement "UAC is designed to catch programs who want to run without my permission" neglects the main point. UAC is designed to prevent programs from performing potentially dangerous actions such as changing the files/system folders or by editing the registry. In other words, a UAC challenge is never directed to a specific application. She always helps that tries to make a request.

  I think it would be easy for Microsoft create a list of "good guys". I also suspect that it would be just as easy for programs not allowed to populate this list without your knowledge, so beating UAC in no time at all.