Weird happening with line spacing

Similar Questions

• Problems with line spacing - not able to adapt

  Having some problems with line spacing - I work in a file that I've not been created.  The phenomenon that occurs is as follows: I have a block of text, when I increase or decrease the foreground one point at a time, nothing happens. As I continue to increase, the line of text will suddenly blow up about a quarter of an inch.

  For example, I 8.5pt type whose main value to auto (10.2) - I hit increases by increments of 1 point, the line does not, only when I get to 13pt we must answer and bumps up to about 1/4 in. I continue to increase by increments of 1 point 13, and line does not respond until I reach 25pt, how the line of bumps down on another 1/4 of an inch.

  This could be the cause?

  It's not downtown... The text is printed to line up on the starting grid.

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• Weird happening with the photoshop layer duplication

  Hello

  I use PS on Mac OS 10.10.2 2014.2.2

  I'm trying to reproduce certain layers of text from one file to the other - I highlight layers in 1 file, right-click to "duplicate layer" and select file 2. Layers appear in the layers palette in file 2, but are not on the file - I checked to see if they are behind another layer and double clicked on 't' icon to see if I can choose the type. I cut all the other layers and duplicated text layers are certainly not there. Just for good measure, I dragged and dropped the layers and it works. I also tried to make a copy of file 2 to see that if the file has been corrupted - it does not either. Finally, I tried to reproduce the other layers of file 1 file 2 - it DOES not work. Finally finally, I created a totally different text layer and tried to copy that - it does not work!

  I uninstalled via CC and re-installed PS (do not check ' delete prefs *)-same problem.

  Anyone got any bright ideas?

  Martin

  Engineering - you can the rest of the day off!

  I, however, am a fool. File 1 is 1500px deep, 2 file 1000px. Duplication of layers in this way place layers EXACTLY in the position that they were in the original - in this case 300px under canvas. All - weel, revealing reveals all

  Thousand thanks

  Martin

• A jpg still print with white lines spaced, but I replaced the color cart.

  A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

  Hello

  That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

  A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

• I need help with my text Document rich Wordpad for it prevents line-spacing

  I have a Windows Vista laptop. I use the Rich Text Document Wordpad, and he started DINA4 my horizontal lines. I don't know how to stop the line spacing when I hit the enter key. I just typed simple features. What is going on? What should I do?

  To the only space in Wordpad, follow these steps:

  (1) select (select) all of your text. You can do this quickly by pressing CTRL + A

  2) press CTRL + 1

  This will be simple space all the text that you have already written.

  Mike

• Weird problem with control of the ring and foot

  So I have some sort of weird issue with a control of the ring and a chart. I'm with LabWindows/CVI on a Windows 7 computer. The part of the program I'm looking at is basically to navigate through data - there are several "transition" (rehearsals experience), and you can choose the one that you want to watch in the list.

  Normally, you would select transitional in the list, it plots the data, then it is done, basically. However, all of a sudden (don't know how long it spent for), when I select anything except 'Average', he made all the tracing and such, then it changes control of the ring to 'Average' (it is not plot the average data or generate all the reminders that I can tell).

  Now the thing the more bizarre as you can see below, it seems that the switch happens just when I draw something on the chart:

  

   

  So, it's just weird. The code in this section is here:

     if(uidc.polyon) {
              polynomial_subtraction(curr_data, np, uidc.polyord, 0); // 0 Skip for now
          }
  
          // Scale the curr_data for gains, then pre-scale the FFT data
          // to have no change in the power spectrum (multiply by (2/np)
          for(j = 0; j < np; j++) {
              fft_data[j] = curr_data[j]*2/np;
              curr_data[j] = curr_data[j]*uidc.fgain[i] + uidc.foff[i];
          }
  
          uidc.fplotids[i] = PlotY(dc.fid, dc.fgraph, curr_data, np, VAL_DOUBLE, VAL_THIN_LINE, VAL_NO_POINT, VAL_SOLID, 1, uidc.fchans[i]?uidc.fcol[i]:VAL_TRANSPARENT);
  
          // Prepare the data.
          FFTEx(fft_data, np, npfft, NULL, FALSE, curr_fft);  // Do the fourier transform
  

  DC is a structure that I use to better organize some UI controls and uidc is for display RAM variables, then dc.fid is the Panel that is embedded in the tab "FID", dc.fgraph = FID_Graph and corresponds to the chart control. Control of the ring is actually in a child Panel, dc.cloc [0]. FID_Graph has a point, it can produce, but the reminder is empty (no not coded something there yet).

  I have also considered that perhaps something in another thread (I don't think there is, but whatever) I see is the cause, however, this behavior still happens on that line. I tried to break in different locations, on hold, then continues, as well by adding a loop containing Delay (0.01), a loop of 100 times. Always happens after the conspiracy.

  Does anyone have any idea why this might be happening?

  Hi Paul,.

  I don't have a solution, but I wanted to point out that, even if you see the ring to change its value only when you call the function of tracing, that doesn't say what this function call that really changes the value of the ring. In CVI, some drawing operations are batched, for performance reasons, and the Panel updates only visually at certain times. One of those moments when you draw a chart data. Yes, the ring changes visually at this time there, but it is probably just 'catch up' a change earlier.

  As you are looking through the code, when the value of the ring, you can use the term > command update UI to force the update panel, so that you don't have to wait for the tracing function and see if all goes well this change happening earlier.

  Luis

• Text tool: < enter > Causes wide line spacing

  Sometimes when I type in the text with the text tool and I touched < entry > for a line break, line break is single-spaced, you expect when entering text in any text editor.

  But often hitting < Enter > causes a line break, which is about six times larger than the font size. Weird.

  How can I cause the tool text always acknowledge < Enter > as a single space, compared to the size of the font.

  Change the line spacing of the character Panel. In the example below, the type, the size is 12pt and the leader 14pt (12/14).

  

• How to change line spacing in a text box?

  I can change everything in changing global Styles, but I want to change the spacing between the lines for one of my boxes of text, just for this box. Can't seem to find a way to do it. To be more precise, in a page of text, some lines of text are single-spaced, and some are typed double-spaced. I don't know how it happened, and I don't know how to cancel it. I want that it all be single-spaced. If I click on 'Edit Page content' and then select the text, I get a menu bar, things I can do with this text. But none of this seems to control line spacing.

  Hello

  There is actually a difference in spacing of text - Maj + entry is a single line, enter is a paragraph break. You may need to adjust the spacing in this way!

• Fill the shape with lines

  I'm really new to illustrator, and I need to know the answer to this question quickly. If I did a weird form with 5 different lines how would I fill? Really, nothing happens when I select the rows, and then select a color.

  Thank you for answering my question

  I'll assume that you used the online tool to make the shape.

  Shape to fill it must be what is called a closed path that you now are five open paths.

  Here's what you can select all the lines and use the command or order J to join the end points and then fill it out.

  But the right way to make the shape you want to do is to use the pen tool.

  More about the pen tool and the tool online and watch videos.

• Satellite L500/00W - gray screen with lines appeared twice

  Hello

  2 weeks ago, I bought a laptop Toshiba Satellite L500/00W and today I was reading something online that this grey screen with lines to come...
  He did so twice already... I do worry...

  This could be the cause? How should I do? This happen to anyone else?

  Thank you
  Lily

  Hello

  I m not L500 owner so I can't tell you if that happened or not.
  I A200 and U400 for my company and I didn t have shown such symptoms in the past

  He signed strange s if the display changes the brightness and display vertical lines.
  It might be a problem of display or something with the graphics card.

  If you see this new symptom then I would recommend connecting the laptop for external monitor to check if the same would be visible on the screen 2.

  If the same would be seen on 2nd screen there is a big chance that and GPU would be affected.

• How can I change the default settings of the line spacing in Word Pad to: unique, space no space after a paragraph

  I need to change the default line spacing values to: simple space and NO space after a point, but it doesn't seem to be a way for that.
  Thanks for the tips.

  Press Ctrl + A to select your entire file, and then click the paragraph Options (the button at the bottom right in the paragraph on the Home tab group).  Uncheck "Add 10pt space after paragraphs."

  To create new documents this setting is already selected, follow these steps:
  1 - Create a new empty file, then follow the steps above to disable the spacing option.
  2 - save the file in the folder C:\Windows\ShellNew with a file name as "new WordPad file.
  3 - follow the steps on this support page to create a link from the context menu to create a new file based on this template: http://support.microsoft.com/kb/140333
  4. whenever you want to create a file with this option already set, just right-click on your desktop or in a folder and choose New > WordPad file.

• Is there a button auto double text line spacing?

  Hello!  I am writing a manuscript which is to be presented with text double-spaced.  While I have not physically go through all 40,000 words and insert another space is a button or function I can use to do this for me?
  Your help is much appreciated, thank you!
  TAM

  Hi Tam,

  Writing a manuscript is identical to any work published, the extra space is required between the 'lines' no letters.

  You don't say which application processing, you use to type your manuscript in. If you use Microsoft Word then, Yes, there is a button that will double space your lines for you.

  If you use Word 2007 I suggest you open your manuscript, and then press CTRL + A (that is, hold CTRL on your keyboard down and press A. This will select 'all' your text. Then go to the Ribbon of the toolbar (make sure that the Home tab is selected) and click the button that has lines on it and one up and down (this is located next to the button text justification and the trainer of paint (paint can)). Click on it and select 2.0 your lines will be double spaced throughout your manuscript now.

  If you use Word 97 or 2003, then you will find the key to line spacing on the formatting toolbar (it is the one with the police, the font size, bold, italic, thereon). Once again, the button is right next to the Justification button. The procedure of double spacing is the same as Word 2007.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org;

• Reformatting line spacing in Windows Mail

  All of a sudden, when I composed an e-mail message in Windows Mail and press enter, double spaces. It's never happened before and I don't know how to reformat the line spacing to give me only spacing when I hit the button enter. Does anyone have a solution or a fix?

  In a message to format HTML, enter often means 'new paragraph', which should be typed.  Try holding Shift when you press ENTER.  Often, this means 'new line '. Brian Tillman [MVP-Outlook]

• Want to change the WordPad default values for font size and line spacing

  I use WordPad quite heavily because it is simple and fast.  But the new version of W - 7 seems to not allow you to change the default values for the font, size and line spacing.  The default values are not suitable for a large part of what I do and I'd like to find a way of quickly and easily, either make the changes permanent or change this to open with a single click of mouse or at most two.  Any suggestions?

  It is the "best" solution to workaround.  After you change your Default.rtf custom, simply move it to your system32 directory and add the "Default.rtf" at the end of the location of your target on the property sheet for your file WordPad.exe.

  Every time that you open its default location in the directory c:\program files\windows NT\Accessoires WordPad.exe, it defaults to now your Default.rtf custom.