What a privilege it must compare the roles and the users of the model

Similar Questions

• What a privilege is necessary for the judgment on the command line?

  I just finish to manage a bunch of files, something I think is sometimes easier to use a MS-DOS prompt with wildcards with. I wanted to put the computer power off and goto bed. I was connected with my normal user account when I published the shutdown command from the command prompt that I used instead of the mouse. To my surprise, I received this message:
  E:\Shared>shutdown s
  The operation completed successfully.
  A required privilege is not held by the client.

  I can understand this restriction for remote clients, but not for the users of the console. What privilege or registry setting would I need to activate this command works for all users of the console? It seems stupid when they can just as easily use Start-> turn off computer-> Turn Off power.

  I'm also surprised with this if the first time I tried it as a regular user in all these years. I use XP Pro, so I can change the local security policy and the security policy templates.

  Can I stop my system with an account standard account standard Windows XP SP3 in command prompt. Was curious when I saw your post.  I'm sure you have checked user account rights.  You have another user account to test?  I would create a user if you have not just to see what happens.

  Just found this, shows your exact error trying to shutdown from the command line.

  http://www.windowsnetworking.com/kbase/WindowsTips/WindowsXP/AdminTips/utilities/Cantshutdownfromcommandline.html

  If you have a Windows XP desktop computer and you try to stop your machine from the command-line by typing shutdown-s you might get the following in response to this command result:

  The operation completed successfully.
  A required privilege is not held by the client.

• the role of multiple users

  Hi gurus,

  I don't know if I'm in the right forum or this thread must be in pl/sql forum, so please move if necessary.

  Im working on 11.2.0.3 windows 7 and must grant a role to multiple users (all users who begin by "OPS$"), but I can't find a solution for me, so I need your knowledge:

  I tried:

  SQL >

  1 start

  2 C1 looping (select username from dba_users where username like "OPS$ % ')

  3 immediate execution

  4 ' grant of TP_RW to | C1. UserName;

  5 end of loop;

  6 * end;

  Start

  *

  ERROR on line 1:

  ORA-00933: SQL not correctly completed command

  ORA-06512: at line 3 level

  what I am doing wrong?

  I got it

  DECLARE

  v_cmd VARCHAR2 (64);

  BEGIN

  C1 in (SELECT username FROM dba_users where username like "OPS$ % ')

  LOOP

  v_cmd: = ' grant of TP_RW to | '"' || C1.username |' » ' ;

  dbms_output.put_line (v_cmd);

  EXECUTE IMMEDIATE v_cmd;

  END LOOP;

  END;

  Chris script just "OPS_USER" with quotes.

  Thank you guys

• Compare the data lines

  I need to compare rows of data and need help.
  WHEN TYPE (is the same)
  And THEN (beginning - end of the #1 ticket #2 Ticket) (if negative, 1)
  OTHERWISE NULL END
  
  Ticket #_Tyoe__Start __End_Test
  1___one___2:00__3:00_0_
  2___one___3:00__4:00_0_
  3___one___2:30__3:30_1_
  
  Basically, I need to know when the start and end times overlap when the type is the same.
  Any help is appreciated. NO MATTER WHAT.

  You must have the Ticket # 1Statut somewhere, can go for a logical column with ex
  CASE WHEN TICKET = 2 THEN THE END OF THE STATE

  If state you your question, we can help you more in detail

• by comparing the average centroid location to the location of the center of gravity measured

  I'm using labview 2015 to design a laser alignment system, using a contoller ag - uc2 and an optical mount piezo driven two webcams. The establishment, is that the webcams are positioned behind the mirrors, which are somewhat permeable, so the webcam will get a shot where the laser beam is pointed. The laser must be aligned manually first, and after that it is satisfied with the alignment, this program will be run once to run in the background. control the position of the laser a few times per minute to correct the thermal drift. After it is first of all, I would like the program to take maybe 10-15 images, to find a location to center of medium severity on each of the mirrors, then switching to compare new images of this center of gravity of the model. My problem is that I can't imagine a way to get a picture of model and have that info Reports to the next iteration of the while loop to the overall program be carried out. I have tried using the structures of the case, which, I imagine, will eventually be the solution, but it did not work as expected. I put the case structure to run based on the value of the indicator loop iteration of the main loop, and I got a while loop in there with registries to raise the center of gravity of this loop and store this information for the next loop to shift. I can see after running the program why my implementation does not work, but I don't know how I can design something that will have an average of several images. I think I should use learn and compare the model, but I don't know how I can convert a cluster (centroid) type of data appropriate for the model comparistion live if you have any suggestions for my existing code or want to offer a different approach, I appreciate it. Also let me know if you need any other screws included.

  In the past, when I had to switch between two 'modes', if you do, I used two consecutive loops while, one for the first mode and one for the second, or I would put Boolean register to indicate that, two modes, the loop was offset.  If you start in a mode, and then more later switch to another once and only once, then you can use a node 'OR' like a lock to power the old way, so the first true feed you of keeps it true until the next time that you run the VI and it returns false.

  I would also add that I looked your VI and the method that you use on average 10 images, while innovating, is usually not a great plan.  Instead of having 10 shift registers build an array of fixed size, just have a table in a shift register, add each new measure at the end and the VI means in the range of mathematics/statistics to calculate the average.

• by comparing the value to the variable null

  Hey guys, quick question. I just want to see if my understanding of the code below is correct:
  
  Declare
  v_variable varchar2 (100)
  Begin
  v_variable: = null;
  
  If v_variable = 'test' then
  message ('test');
  end if;
  
  If v_variable! = 'test' then
  message ('test2');
  end if;
  
  If my interpretation is correct, "test2" message should print but wont 'test' or is it possible that I could get an error if we cannot compare with null values?
  
  Thank you
  
  Thank you.
  
  
  
  
  End;

  You must compare the values null, is null. A comparison of null = or! always = the NULL value and thus you reach your outings:

  $[CHE_TEST@asterix1_impl] r
    1  begin
    2  if null = null then
    3  dbms_output.put_line('result: true');
    4  elsif null != null then
    5  dbms_output.put_line('result: false');
    6  else
    7  dbms_output.put_line('result: else');
    8  end if;
    9* end;
  result: else
  

  The two if the conditions are evaluated to NULL, then the else branch is executed.

  acutally null = null evaluates to null as you can see:

  $[CHE_TEST@asterix1_impl] r
    1  declare
    2    bres boolean;
    3  begin
    4    bres := null = null;
    5    if bRes is null then
    6      dbms_output.put_line('Result: NULL');
    7    else
    8      dbms_output.put_line('Result: NOT NULL');
    9    end if;
   10* end;
  Result: NULL
  

  See
  http://docs.Oracle.com/CD/B19306_01/AppDev.102/b14261/if_statement.htm#LNPLS01324

  see you soon

• Save the model in Oracle Applications

  Once, I fell on the code to save a model of XML in applications. I'm not able to see that now. Can someone please?
  
  Thank you, Tyler

  Try this:

  DECLARE
  errbuf varchar2 (100);
  RETCODE number;
  lv_conc_prog VARCHAR2 (30);
  lv_template_code VARCHAR2 (30);
  lv_template_name VARCHAR2 (100);
  ln_business_group_id NUMBER;
  BEGIN
  errbuf: = 'NO ERRORS ';
  RETCODE: = 0;
  / * REGISTER BI PUBLISHER MODELS WITH PAYROLL * /.
  /* -------------------------------------------- */
  / * FIRST PARAMETER: PLEASE ENTER THE NAME OF DATA DEFINITION * /.
  / * STATEMENT: writer to check (XML) ENTER "PAYARCHCHQW", tips for filing (XML) "PYUSDEPADVXML" * /.
  / * SECOND PARAMETER: PLEASE ENTER THE CODE OF THE TEMPLATE * /.
  / * STATEMENT: THIS MUST MATCH THE MODEL CODE YOU PROVIDED THROUGH "BI PUBLISHER ADMINISTRATOR RESPONSIBILITY" * /.
  / * THIRD PARAMETER: PLEASE ENTER MODEL NAME * /.
  / * STATEMENT: THIS MUST MATCH THE NAME OF TEMPLATE PROVIDED THROUGH "BI PUBLISHER ADMINISTRATOR RESPONSIBILITY" * /.
  / * FOURTH PARAMETER: PLEASE ENTER THE ID OF GROUP OF COMPANIES * /.
  / * STATEMENT: THIS SHOULD BE THE GROUP ID TO WHICH YOU WANT TO RUN CONCURRENT PROGRAMS * /.
  lv_conc_prog: = SHORT NAME, for example: "PAYARCHCHQW";
  lv_template_code: = Code of the model of the XML editor administrator, for example: "PAYARCHCHQW";
  lv_template_name: = 'Custom Check Writer (XML)'; / * This is what appears in the list of values to check Style/deposit advice StyleParameters window check author and notice of filing * /.
  ln_business_group_id: = '999';
  () PAY_US_CUSTOM_TEMPLATE.insert_data
  errbuf,
  RETCODE,
  lv_conc_prog,
  lv_template_code,
  lv_template_name,
  ln_business_group_id);
  / * MODEL BI PUBLISHER REGISTERED WITH PAYROLL. THANK PIECE.*.
  COMMIT;
  END;

• What computer privileges must install and apply the updates for Creative Apps clouds using Windows 7?

  What computer privileges are required to install and apply the updates for Creative Apps clouds using Windows 7?

  When you work for a company that controls the software installed on your computer, it is important to know if IT supports is necessary to install and apply the updates when updates are available.

  It is important to know this information before you buy.

  Thank you for your support.

  ~ Paul Miller

  admin command is required for installation or any changes made to the software from your computer.

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• What is the potential security risk to give 'any analysis' to a role or a user of 11.2.0.3 base data?

  What is the potential security risk to give 'any analysis' to a role or a user of 11.2.0.3 base data?

  Thank you

  Larry

  What is the potential security risk to give 'any analysis' to a role or a user of 11.2.0.3 base data?

  This is a HUGE security risk.

  Any person who uses the ANALYZE statement may accidentally or INTENTIONALLY, destroy the overall system performance.

  Just look at what the ANALYZE statement can do:

  https://docs.Oracle.com/CD/E11882_01/server.112/e41084/statements_4005.htm

  Goal

  Use the ANALYZE instruction to collect statistics, for example, to:

  • Collect or delete statistics on an index or index partition, table or table partition, table held in index, cluster, or scalar object attribute.

  The ANALYZE statement has been deprecated for statistics for the DBMS_STATS package.

  But what happens if the real and accurate data use by your important questions have been removed or replaced with nonsense, invalid statistical totall?

  You could bring your system to its knees INSTANTLY. The system could start making full of HUGE tables table scans instead of using an appropriate index.

  TERRIBLE, TERRIBLE thing to do to grant this privilege unless absolutely necessary.

• "Workflow" for special (Only) Role must qualify the lead.

  Hi all
  
  Leaders must have more than one role, and heads should be converted with the other role. How this can be done.
  
  For example.
  
  'Sales & Marketing Manager' here must qualify the lead and without permission to convert.
  
  Here is 'admin' to turn lead into account and opportunity.
  
  I tried with the help of the lookup function, not managed. need help.
  
  
  
  Kind regards
  Ratan

  There is NO need for WFs whatsoever to control this at the level of the role. Step 4 - privileges has the following features:
  Son of archive
  Convert prospects
  Qualify prospects
  Reject the son

  Just give the privilege that is appropriate to the appropriate role. Not having is not the privilege deletes the button of the screen entirely.

• My iPhone 6plus had 30 GB of free space for a moment, then I must have done something where my space was taken over.  What could have only to wipe the rest of my memory?

  My iPhone 6plus had 30 GB of free space for a moment, then I must have done something where my space was taken over.  What could have only to wipe the rest of my memory?

  The first thing I would check is your photos storage configuration. You have deselected optimized storage. Tap Settings > iCloud > pictures or settings > Photos & camera, then select a storage parameter.

• What formula would I use to add all the other ranks in my spreadsheet. I want to compare the fees and expenses of 2015 since they are incurred for 2016

  On the same worksheet, I want a spreadsheet to compare spending 2015 totals by month in several categories to 2016 expenses when they occur. What is the best way to implement this worksheet? It is essentially a budget, but wants to see how the category spending increase or decrease all the months for 2016.

  Thanks for any help.

  Hi Bruddah,

  I would like to start by rearranging your table so that the amounts from here to 2015 and 2016 switch not in the column, as implied in your question.

  Vocabulary of the numbers:

  worksheet not sentence numbers

  Worksheet: A spreadsheet. Usually abbreviated to 'Document '.

  Leaf: a blank canvas on which are placed the tables and other objects. A Document has at least one and maybe more than one.

  Table: an object consisting of one or more cells, arranged in rows and columns.

  Take a look at the personal Budget template (file > new form model...), specifically the summary in the table of categories.

  It uses the formula: = SUMIF (Transactions::Category, A2, Amount)

  Since you want to compare the volumes in several CATEGORIES at the specific two-year MONTH, you will need SUMIFS, using three test values, pairs of condition.

  Syntax: = SUMIFS (sum of the values,test values,condition,test values,condition,test values,condition)

  I would like to know if it is enough information. If this isn't the case, I'll be later in the day to enter more specific details. In the meantime, a screenshot of your table and the lines of (at least) your transactions table header would be probably useful.

  Kind regards

  Barry

• When I click on the "buy now" button for gift of my friend and itunes, it says that I must contact the support of itunes store to complete the transaction, what should I do?

  When I click on the "buy now" button for gift of my friend and itunes, it says that I must contact the support of itunes store to complete the transaction, what should I do?

  Saiyan Minion wrote:

  He says I have to contact the itunes store support to complete the transaction, what should I do?

  He said the support to contact iTunes.

• That must make the password stored in the JAGENT portfolio, and what JAVA_HOME should I use for the pw_agent_util.sh command?

  I configure the GoldenGate Plugin for OEM. There is a step to create the portfolio. The documentation is not clear on the role of the provided password. If I run the JAGENT as user oracle, it must match the password for the oracle user, or is this separate password? Also, should I use the jdk to OEM agent to set JAVA_HOME?

  ./pw_agent_util.sh - jagentonly

  Pat,

  Morning.  Good to see that someone is working on the use of the plug-in for GoldenGate in OEM12c.

  If you use the plugin 12.1.0.2, you will be much better with the preparation of reports on the processes of GoldenGate.  In order to get the 12.1.0.2 plugin to work, the 12.1.3.0 JAgent is necessary and can be downloaded in the distribution of the Oracle GoldenGate monitor (Agent Monitor configuration Oracle #GoldenGate |) DBASolved).  If you use the old plug-in 12.1.0.1, the JAgent is integrated with the GoldenGate Software (Oracle GoldenGAte(11.2.1.0.1 and later) and Oracle Enterprise Manager 12 c |) DBASolved).  I recommend you take the new plug-in!

  Now to the address that ask you the password. The password is stored in the portfolio under the House of GoldenGate ($OGG_HOME/dirwlt) and is used directly for the JAgent to connect to the EMAgent and connect with OEM.  The password associated with user name is configured in the $JAGENT_HOME (different depending on version, look for the Config.properties).  Then in OEM, the user name defined in the Config.properties and the password in the portfolio must be provided before OEM GoldenGate targets will come.

  The $JAVA_HOME parameter is dependent on the version of JAgent you want to run.  The JAgent 12.1.3.0 to using the JDK 1.7 or higher.  The JAgent shipped using JDK 1.6.

  Thank you

  Bobby