What add-on that I can use to create multiple messages (wholesale several messages)?

Similar Questions

• Satellite P100-488 - what memory modules that I can use

  Hello

  I want to upgrade my memory from 1 GB to 2 GB, but I can't find the correct specifications for the 1 GB memory current installed on my laptop.

  Indeed, I could only confirm that the frequency is 533 Mhz, but my question is: what type of memory should I use? PC2-4200 or PC2-4300?
  I am unable to find the information of the current type used on this laptop.

  Thanks in advance.

  Hello

  This site of memory should help you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29973&ft=m&St=3

  According to this website of the Satellite P100-488 supports DDR2 667 MHz (PC2-5300) memory modules and you can upgrade it to 4 GB max.

  I hope I could help!

  Greetings

• Re: Satellite Pro M40: what memory modules that I can use

  Hello

  I was hoping someone could point me in the right direction.
  I have a Satellite Pro M40 part number: PSM46E-00H002EN

  I really want to upgrade the memory, but I don't know what to do.
  I know I want two 1 GB ones but I do not know what kind.

  I looked and there seems to be so much of.

  Could someone tell me exactly what I want or give me a link to buy.
  I would be grateful rerally.

  Hello

  I think you should check this page from memory Satellite Pro M40:

  Memory for Toshiba Satellite Pro M40
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26119&ft=m&St=3

  It is said that you could use the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules and you could upgrade the memory up to 2 GB of RAM

  Good bye

• Satellite 2800-200 - what external enclosure that I can use for HARD drive

  My daughter has a laptop of Toshiba S2800-200 eldely.
  It is broken where the mains cable between the machine and she has been quoted £100 for repair!
  She has already bought a new computer repair is not an option.

  Toshiba, however, contains some files (photos, music etc, mainly) that she would like to keep, but get the files of the computer laptop and on its new machine is a problem.

  My thought is to buy a cheap USB basket somewhere like eBay, remove the hard drive and use the caddy to download photos. etc on his new computer via the USB port.

  To buy the correct caddy I need to know the full spec (diameter, capacity, etc.) of the Toshiba hard drive and I don't have a clue!

  Can someone here point me to the spec of the drive on a Toshiba S2800-200 please?

  I guess the Satellite 2800 series is supported by the IDE HDD controller and HARD drive would be also a 2.5 IDE HDD.
  That's why you should look for a USB IDE HDD box

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• What is the longest cable that you can use for a webcam If you want to move a piece

  What is the longest cable that you can use for a webcam If you want to move a room, you want to use as a granny cam

  I get up to a cable of length more camera more and then peripheral is not is not recognized. I Yawcam program on my computer which is optimal

  for a web camera to use invisably.

  According to the official FAQ USB. page here:

  http://www.usb.org/developers/usbfaq#cab1 ,

  5 m is the maximum length of a USB cable. A lot of points 3 and 4 on the above page dealing with how to deal with scenarios beyond this length.

  Personally, I have only ever went up to 4.8 m and it was with an external hard drive (which had its own separate power supply).

• I dropped only $60 on an add on that I can not install because it says I need Dreamweaver 9 or higher. Well, I have 11.1 - CC downloaded and this is what I get? WTF?

  What the subject line - I just dropped $60 on an add on that I can not install because it says I need Dreamweaver 9 or higher. Well, I got 11.1 - downloaded CC and followed the instructions and this is what I get? WTF?

  The extension manager is obsolete. Resources articles are available here: Adobe and here Adobe Exchange.

• Whats up mobile devices that I can use my new creative cloud subscription on?

  Whats up mobile devices that I can use my new creative cloud subscription on?

  Hello

  You can install apps cloud creatives on up to 2 mobile devices.

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Is it possible that I can use a mask from a sequence?

  Hi, it is a strange question, I don't even know if the AE can make it happen, but that's why I ask you, I have this video, full of layers, but there is only one layer with fire, the thing is I want to add ' Turbulent move "in the fire layer but also affect the character which is behind this , but only in areas that touch the fire, is possible to do this?

  

  Before dialing the layers that you want to apply move a turbulent to. Inside the pre-comp duplicate the layer of your character so that you can use the double as a matte. Add a new solid for turbulent displace. Put double your character above the turbulent dispersion layer and use it as a matte. Try a simple necklace to adjust the limit of your matte. Now, apply a pot turbulent move and change the layer and the adjustment layer.

  I think this will give you what you want.

• Camileo H10 - SD card that I can use?

  Hello world

  I'm new to Toshiba products.

  I just bought one of your cameras film (Camileo H10) and I can't find any help online.
  The questions I wanted to ask you were,

  (1.) what class (for speed) of the SD card allows the camera.
  2.) is there somewhere I can fill my warranty online

  Hello!

  The cards that you can use are mentioned in the user manual normally.

  I have good experiences with Kingston and SanDisk cards. I use every two years and never had problems with both.

  Good bye

• Is it possible that I can use at the back of my machine product keys to activate a Windows XP SP3 as a copy authentic?

  real operating system

  I bought 8 computers to set up an Internet Café which is windows xp professional authentic, one day, I was attacked by a power serge that crashed all my hard drives in the computers and had nothing to recovery... I replaced all the hard drives and surprisingly enough my original CD with the real BONES has a lot of scratches and can install the operating system. The version I have is only SP3 and is not authentic. I always authentic labels with product keys of the defective operating system stuck in each of the computers. Is it possible that I can use the product keys for SP3 as a copy is authentic?

  You need get the good one, the CORRESPONDENT XP installation CD.

  So, if all COA stickers indicate an OEM version of Windows XP Pro (MS level does not count), so if you can get a real GENERIC OEM Windows XP Pro installation CD (MS level does not count), simply use the product key on the COA sticker.
  You say that the version available is "not true." Because I don't know what you have, with the exception because it is not a true generic OEM XP Pro installation CD, I recommend that you do NOT use. Although hard to find, there are reputable dealers who sell this authentic CD. You can also borrow one from someone you know. Alternatively download the file .iso for him, but ONLY if YOU KNOW WHAT YOU DO! Fortunately there are values of hash MD5 and SHA1, published online to verify that you have the right pair. But if you don't know what you're doing, you could very well end with something that's plagued malware!

• Code 12 Mobile Intel (r) Express Chipset Family 995 cannot find enough free resources that it can use. Must disable another device.

  I know what this means, but do not know how to fix it!  What other device safely disable to make this work?  Any help will be appreciated.  Thank you!

  See this:

  Code 12: This device cannot find enough free resources that it can use
  http://TechNet.Microsoft.com/en-us/library/cc732199 (v = ws.10) .aspx

  Try running the Fixit mentioned on the link under "additional information."

  If this does not work, try this:

  Go to Device Manager, under the display adapter, double-click on your Mobile Intel (r) Express Chipset Family 995 to see its properties. Click on the 'Resources' tab, under "Conflicting device list" note the device in conflict. Look for the device in Device Manager, if its listed under "other devices" right click and uninstall the device. Alternatively, you can "update driver software... ' or 'Disable' the device.

  See the links in the reference below:
  Resolve conflicts the Windows Device Manager
  http://support.verizonwireless.com/CLC/devices/Knowledge_base.html?ID=48051

  Troubleshooting of conflict of devices with Device Manager
  http://support.Microsoft.com/kb/310126

  Resolve hardware conflicts
  http://www.annoyances.org/exec/show/article07-003

• This device (graphics card), cannot find enough free resources that it can use. (Code 12) __NetBook ASPIRE ONE - display adapter resource conflict?

  This device (graphics card), cannot find enough free resources that it can use. (Code 12)
  NetBook ASPIRE ONE - display adapter resource conflict? Can't find the other conflicting H-washer? Graphics Intel Graphic Media Accelerator 3150.
  If you want to use this device (graphics card), you will need to disable one of the other devices on this system. I bought this camera 6 weeks, I can't get the maximum. Set-up for my graphics cards. 800 x 600-32 bit only. Please tell me what to do. And ASPIRE or Windows7 customer service phone #. Thank you.

  Hi athe43,

  Below I've listed the details of error Code 12 and the article with additional information:

  Code 12

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  Recommended resolution

  You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the device in conflict.

  Turn off the device in conflict

  1. In the device properties dialog box, click the general tab.
  2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.
  3. Follow the resolution steps provided by the wizard to resolve the problem.

  http://support.Microsoft.com/kb/310123

  This article was originally for XP however the description still applies.  Also, please see the following article on the opening of the troubleshooter of hardware for Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hope that helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Realtek PCIe Gbe family controller works only with Code 12: this device cannot find enough free resources that it can use.

  Original title: Realtek PCIe Gbe family controller does not work

  so I can't access my internet so I use my phone... because ot said a (code 12). and "this device cannot fing enough free resources that it can use." and I don't know what I can and can not turn off so that it works... I also believe that he has stopped working after I said would be a windows update in June... someone help... ITA has windows 7. the model is a center of thinking lenova

  Lori

  I go to the Lenova support website and download and reinstall network controller (Realtek PCIe Gbe) drivers for you computer model.

  http://support.Lenovo.com/en_US/downloads/default.page?selector=expand