What are best practices for questions? Will award points to the answers\suggestions

Similar Questions

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• Best practices for retrieving a single value from the Oracle Table

  I'm using Oracle Database 11 g Release 11.2.0.3.0.

  I would like to know the best practice to do something like that in a PL/SQL block:

  DECLARE
    v_student_id    student.student_id%TYPE;
BEGIN
    SELECT  student_id
    INTO    v_student_id
    FROM    student
    WHERE   last_name = 'Smith'
    AND     ROWNUM = 1;
END;

  Of course, the problem here is that when there is no success, the NO_DATA_FOUND exception is thrown, which interrupts the execution.  So, what happens if I want to continue despite the exception?

  Yes, I could create a block nested with EXCEPTION section, etc, but it seems awkward for what seems to be a very simple task.

  I've also seen this handled like this:

  DECLARE
    v_student_id    student.student_id%TYPE;
    CURSOR c_student_id IS
        SELECT  student_id
        FROM    student
        WHERE   last_name = 'Smith'
        AND     ROWNUM = 1;
BEGIN
    OPEN c_student_id;
    FETCH c_student_id INTO v_student_id;
    IF c_student_id%NOTFOUND THEN
        DBMS_OUTPUT.PUT_LINE('not found');
    ELSE
        (do stuff)
    END IF;
    CLOSE c_student_id;   
END;

  But it still seems to kill an Ant with a hammer.

  What is the best way?

  Thanks for any help you can give.

  Wayne

  201cbc0d-57b2-483a-89f5-cd8043d0c04b wrote:

  What happens if I want to continue despite the exception?

  It depends on what you want to do.

  You expect only 0 or 1 rank. SELECT INTO waiting for exactly 1 row. In this case, SELECT INTO may not be the best solution.

  What exactly do you do if you return 0 rows?

  If you want to set a variable with a NULL value and continue the treatment, Frank's response looks good, or else use the modular Billy approach.

  If you want to "do things" when you get a line and 'status quo' when you don't get a line, then you can consider a loop FOR:

  declare
    l_empno scott.emp.empno%type := 7789;
    l_ename scott.emp.ename%type;
  begin
    for rec in (
      select ename from scott.emp
      where empno = l_empno
      and rownum = 1
    ) loop
  l_ename := rec.ename;
      dbms_output.put_line('<' || l_ename || '>');
    end loop;
  end;
  /
  

  Note that when no line is found, there is no output at all.

  Post edited by: StewAshton - Oops! I forgot to put the result in l_ename...

• What is best practices for the mirroring of a vector design (symmetrical)?

  say OK, I'm a user icon detailed (head and shoulders people) for some icons, etc. which need to scale graphics General icons for web and print.

  I can create the silhouette easily by tracing around my sketch in pencil or making it up on the spot. now, I wonder as I used maya (3d) in the past and I could work on one side, while the otherside (x) is created as a pseudo copy until I get an independent form. Is it possible to do this kind of thing in illustrator CS4? What you guys need to do something like that is completely symmetrical? (I'm still stuck on this when in a hurry)... could you explain step by step?

  Thanks for the tips!

  You can do this with a transformative effect, updated to reflect, 1 copy.

  

  In the appearance Panel, select the path and save a style that can be applied to the new paths that you draw.

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• What are the best practices for a new employee to learn inside the instance of their business of Eloqua as efficiently as possible?

  We have companies everything changed at some point in our lives. And we all go through the process in the first weeks, where you feel new and are just trying to figure out how not to get lost on your way in the mornings.

  On top of that, trying to familiarize yourself with your new company Eloqua instance can be a daunting task, especially if it's a large organization.

  What are the best practices for new employees to learn as efficiently and effectively as possible?

  I am in this situation right now. Moved to a much larger organization. It is a huge task trying to understand all the ins and outs not only society, but also of the eloqua instance, especially when she is complex with many points of integration. I find that most of the learning happens when I really go do the work. I spent a ton of time going through the programs, documentation, integrations, etc., but after awhile, it's all just words on a page and not absorbed.

  The biggest thing that I recommend is to learn how and why things are made the way they are currently, ask lots of questions, don't assume not that things work the same as they did with your previous employer.

  Download some base in place level benchmarks to demonstrate additional improvement.

  Make a list of tasks in the long term. As a new pair of eyes, make a list of things you'd like to improve.

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• What is the best way or best practices for access to the session defined in servelt pipeline component?

  Hi Experts,

  What is the best way or best practices for access to the session defined in servelt pipeline component?

  Please, share your ideas.

  Thank you

  ankV

  As performance is concerned, a lot would depend on as to how your design & logic is implemented and you presented search operations to support the specific performance problems. In fact the operation itself can be not expensive than in-house it is somewhat like a search for key/value of the objects in session/application context name. But having said that, Yes, a potential performance problem could be because it's a synchronized operation. So to avoid searches to be performed during each request, caching the results of a search of a component. And in the majority of cases to solve a 'A' component within your component, you must configure a property reference 'A' in the file properties for your component.

• What is the best practice for the enumeration for the ADF?

  Dear all,
  
  What is the best practice for the enumeration for the ADF?
  
  I need to add the enumeration to my request. ex: sex, marital status.
  
  How to deliver? Declarative custom components or is there another way?
  
  Thank you.
  Angelique

  Check out this topic - '5.3 fill view object Rows with static data' in Guide of Dev
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcquerying.htm#CEGCGFCA

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• Best practices for deferred loading collection once but ensuring there?

  I'm confused on best practices for managing the "setup" of the form, where I need a remote call to occur once only once for the form, but I also need to make use of this collection for a combobox that will change when different lines in the DataGrid or clicked. Easier if I just explain...

  1. You click on a row in a datagrid control to modify an object (for this example we will say it is an "employee")
  2. The form you go must have a collection of objects 'Department' charged by a remote call. This collection of departments should only occur once, since it is not common for them to change. The departments collection is used to fill a combobox in form.
  3. You need to understand what Department of the comboBox control is the property selectedIndex by iterating over the departments and find one that fits the employee.department.id

  Individually, I know how I can do all of the above, but because of the asynchronous nature of Flex, I'm having hard time setting up things. Here are a few questions...

  My first thought was just put the loading of the departments in an init() method on the employeeForm who would load as an event on the form creationComplete(). On the component page grid when the event handler by clicking a line of fire, I then calls the setup() method on my employeeForm which stands at which selectedIndex to set to the combobox control looking at the departments.

  The problem is the resultHandler for the load of the departments could not returned (so departments could not be there when "setUp" is called), but I can't put my business logic to determine the correct combobox in the departmentResultHandler because it would mean that I would always have whenever I don't want the fire of the call to the remote server object.

  I have to miss a single best practice? Suggestions welcome.

  Hi there rickcr

  It is pretty rough and you need to make a few storage upward, but take a look below.

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
          Import mx.controls.Alert;
  Import mx.collections.ArrayCollection;
             
  private var comboData:ArrayCollection;
             
  private void Setup (): void {}
  If {(comboData)
  Alert.Show ("data are present")
  populateForm()
  } else {}
  Alert.Show ("data not '")
  getData();
  }
  }
             
  private void getData (): void {}
  comboData = new ArrayCollection();
  The result of this call, the installer again
  }
             
  private function populateForm (): void {}
  fill out your form
  }
  ]]>
     
     
     
         
         
         
         
     
  

  I think this example type of watch you want.  When you first click on tab 2 there is no data.  When you click on tab 2 once again, there is. The data for your combo will be stored in comboData.  When the component gets created first the comboData is not instansiated, just romance.  This allows you to say

  If (comboData)

  This means that if the variable contains your data, you can fill out the form.  Initially it is not so now the else condition, you can call your data and return the result of your data then you can say

  comboData = new ArrayCollection(), put the data in it and remember the installation again.  This time comboData is populayed and is so it will run the method populate the form and you can decide which selected item to affect.

  If it is on a large scale you want to look into the creation of a suitable handler class to handle this, but this simple demo shows you can test to see if the data is different.

  Hope it helps and gives you some ideas.

  Andrew

• Best practices for the application of sharpness in your workflow

  Recently I tried to get a better understanding of some of the best practices for sharpening in a workflow. I guess that I didn't know, but there are several places to sharpen. Who are the best? They are additive?

  My typical workflow involves capture an image with a professional DSLR in RAW or JPEG or import into Lightroom and export to a JPEG file for the screen or printing of two lab and local. 

  There are three places in this workflow to add sharpening. In the DSLR manually into Lightroom and when exporting a JPEG file or print directly from Lightroom

  It is my understanding that sharpening is added to RAW images even if you add sharpening in your DSLR. However sharpening will be added to the JPEG from the camera. 

  Back to my question, it is preferable to manually the sharpness in the SLR in Lightroom or wait until you export or output of your printer or final JPEG file. And additive effects? If I add sharpening to the three places I am probably more sharpening?

  You have to treat them differently both formats. Data BULLIES never have any sharpening applied by the camera, only JPEG files. Sharpening is often considered to be a workflow where there are three steps (see here for a seminal paper on this idea).

  I. a step sharpening of capture which compensates for the loss of sharp in detail due to the Bayer matrix and the filter anti-repliement and sometimes the lens or diffraction.

  II. A creative sharpening step where some details in the image are 'highlighted' sharpness (do you eyelashes on a model's face), and

  III. output sharpening, where you fix the loss of sharpness due to the scale/resampling for the properties of the average output (as blur because of an impression how process works or blurry because of the way that a screen LCD sets out its pixels).

  These three are implemented in Lightroom. I. and II. are essential, and basically must always be performed. II. until your creative minds. I. is the sharpening that see you in the Panel to develop. You need zoom at 1:1 and optimize the settings. The default settings are OK but quite conservative. Usually you can increase the value of the mask a little so that you're not sharpen noise and play with the other three sliders. Jeff Schewe gives an overview of a strategy simple to find the optimal settings here. It is for the cab, but the principle remains the same. Most of the photos will benefit from optimization a bit. Don't go overboard, but just OK for smoothness to 1:1.

  Stage II as I have said, is not essential, but it can be done using the local adjustment brush, or you can go to Photoshop for this. Stage III, however, is very essential. This is done in the export, the print panel Panel or the web. You can't really get a glimpse of these things (especially the sharpening printing-oriented) and it will take a little experimentation to see what you like.

  For jpeg, sharpening is done already in the camera. You could add a small extra capture sharpening in some cases, or simply lowering the sharpening in camera and then have more control in the post, but generally, it is best to leave it alone. Stage II and III, however, are still necessary.

• Best practices for obtaining of all activities for a Contact

  Hello

  I'm new to the Eloqua API and wonder what is the best practice to download a list of all the activities for a given contact.

  Thank you

  Hi Mike,.

  For activities in general, export activity 2.0 bulk will be the best way to go. Docs are here: http://docs.oracle.com/cloud/latest/marketingcs_gs/OMCBB/index.html

  But it can be a complex process to wrap around your head if you are new to the Eloqua API. So if you're in a pinch and don't bother the association of these activities to campaigns and just shoot a little contact activities, you can resort to the use of REST API calls.

  Calls of the activity are visible (from the console Firebug or Chrome), if you open any contact record and go to the tab "activity log". If you put in all the activities, it will trigger a dozen or more calls or you can choose an individual from the drop-down list to inspect this call more in detail.

  Best regards

  Bojan

• vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

  Hello

  I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

  I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

  (I had this pattern HERE - rights go to Paul Kelly)

  My next question is how much of a traffic load is each object take through the network, percentage wise?

  For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

  I need the percentage of bandwidth, if possible.

  If anyone out there can help me, that would be so awesome.

  Thank you!

  -Erich

  Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

  That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

  Sent from my iPhone