What are TCP/UDP ports must be open for version 4.8 of the VPN Client?

Similar Questions

• What TCP/UDP ports must be open on a firewall for adobe reader and Flash Player?

  What TCP/UDP ports must be open on a firewall for adobe reader and flashplaer to work properly? This would include the update, which connects and no matter what subset of functionality.

  The Acrobat family uses TCP, HTTP/HTTPS for all traffic. Ports and the following processes can be active on a client computer in Windows:

  AdobeARM.exe - automatic updates - port 443

  AcroRd32.exe - brand messages - port 443

  AcroRd32.exe - links in documents - whatever that is specified in the URL

  Acrobat.exe - brand messages - port 443

  Acrobat.exe - links in documents - whatever that is specified in the URL

  AdobeCollabSync.exe - review Tracker data - port 443

  The same ports are used by the components of program on OS X.

  There is no listen to incoming ports for all elements of the Acrobat family. Automatic updates are not pushed, and there is no server in the software process.

• What are TCP IP ports are used by CRIO

  MIO

  Which ports or a range of ports are used for the cRIO by OR for:

  LabVIEW development system

  OR MAX

  RAD tool

  Network browser OR

  Manager of distributed system of NOR

  Configure us the firewall settings and VPN connections and understanding these elements is very important to us.

  Thanks in advance.

  There are a few posts about this already on the forums - you might find them useful:

  http://forums.NI.com/T5/real-time-measurement-and/exactly-what-ports-are-used-to-communicate-with-a-...

  https://forums.NI.com/T5/real-time-measurement-and/cannot-access-cRIO-behind-NAT-firewall-with-Max/t...

  I believe that UDP (beforehand) and TCP (for communications) is used by MAX.

  You might also consider using a tool like Wireshark network sniffer to see what links are used.

• To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the

  Im trying to open an excel file from a shared Web site, I used to be able to open them in Excel, when I used Internet Explorer, now all I see is the spreadsheet on a Web page, when I try to open the file in Excel (there is a tab that asked do you want to open in excel) I get a message "to open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser. must support opening files directly from Excel in the browser. »

  You have Excel installed?
  
  If so, can you use Internet Explorer for the Web site?

  As far as I KNOW, Microsoft is not an add-on for Firefox can be opened from Excel in Firefox. It may or may not work properly depending on whether this Web site uses a MIME type for files it delivers.

  Another way to handle that would be via Open Office or free agency; both are open source (free) that allows to display files XLS (Excel) , and both programs have a Mozilla browser plugin to allow Firefox to open the 'Calc' of these programs.

  http://en.Wikipedia.org/wiki/LibreOffice
  
  http://en.Wikipedia.org/wiki/OpenOffice.org > http://en.wikipedia.org/wiki/Apache_OpenOffice

• WHAT ARE THESE FILES IN MICROSOFT VISUAL STUDIO FOR & DO I NEED?

  I DON'T KNOW WHERE TO POST THIS QUESTION. I'VE LOOKED EVERYWHERE TO TRY TO FIND AN ANSWER - I LOOKED IN THE VISUAL STUDIO FORUM & DIDN'T SEE MY QUESTION HERE. I JUST NEED TO KNOW IF I NEED THESE FILES & WHAT ARE THEY? I USE THEM KNOWINGLY TO ANYTHING. THE ONLY MICROSOFT OFFICE PROGRAM I USE REGULARLLY IS A NOTE.
  SUDDENLY I HAD A SHOW PLACE FOLDER ON MY DESKTOP ONCE OPENED TAKES ME TO A FILE TO INSTALL MICROSOFT VISUAL C ++ 2008 REDISTRIBUTABLE. I INSTALLED IT & IT PUT A LARGE NUMBER OF FILES IN MY 'COMPUTER' FOLDER - NON AT ALL CERTAIN FILE, JUST BELOW ALL OTHER FOLDERS. THERE ARE 9 FILES EULA WHICH TALK ABOUT THE BETA OF MICROSOFT VISUAL STUDIO 9. I DON'T EVEN KNOW WHAT IT IS, SO MY QUESTION IS WHAT IS IT & DO I NEED? TAKES A LOT OF SPACE. IVE ALSO GOT A FOLDER FOR MICROSOFT VISUAL STUDIO 8 FOLDER IN MY PROGRAM FILES TO COMPUTER FOLDER - HAVE I NEED THIS

  Sunday, August 8, 2010 21:56:30 + 0000, VANITY999 wrote:

  I DON'T KNOW WHERE TO POST THIS QUESTION. I'VE LOOKED EVERYWHERE TO TRY TO FIND AN ANSWER - I LOOKED IN THE VISUAL STUDIO FORUM & DIDN'T SEE MY QUESTION HERE. I JUST NEED TO KNOW IF I NEED THESE FILES & WHAT ARE THEY? I USE THEM KNOWINGLY TO ANYTHING. THE ONLY MICROSOFT OFFICE PROGRAM I USE REGULARLLY IS A NOTE.
  SUDDENLY I HAD A SHOW PLACE FOLDER ON MY DESKTOP ONCE OPENED TAKES ME TO A FILE TO INSTALL MICROSOFT VISUAL C ++ 2008 REDISTRIBUTABLE. I INSTALLED IT & IT PUT A LARGE NUMBER OF FILES IN MY 'COMPUTER' FOLDER - NON AT ALL CERTAIN FILE, JUST BELOW ALL OTHER FOLDERS. THERE ARE 9 FILES EULA WHICH TALK ABOUT THE BETA OF MICROSOFT VISUAL STUDIO 9. I DON'T EVEN KNOW WHAT IT IS, SO MY QUESTION IS WHAT IS IT & DO I NEED? TAKES A LOT OF SPACE. IVE ALSO GOT A FOLDER FOR MICROSOFT VISUAL STUDIO 8 FOLDER IN MY PROGRAM FILES TO COMPUTER FOLDER - HAVE I NEED THIS

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  Programming software is Visual Studio. If you do not, you do not have
  need him.

  But to be on the safe side, before deleting, why not burn these
  files on a CD? That way if something later complains of not
  Here, you can put back them.

  Ken Blake

• Lightroom mobile app must be opened for CC to synchronize?

  I started using Lightroom Mobile and downloaded > 600 images from my phone, which must be synchronized to the computer and Lightroom CC.

  It seems that everything in the middle of download of CC images, no more images are synchronized. I check my account cloud and I see that all the images are in the collection in the web pages (cloud).

  When I run the Lightroom app on my phone - sync then continues on my CC Office install.

  Is it necessary that the Lightroom app be open on my phone for CC to synchronize? Or is the question that mobile actually has not added all the images in the cloud - although the cloud shows the correct number of images? So that even if the cloud page shows that there are > 600 images in my collection, it has yet to receive all the data and therefore the CC synchronization cannot continue?

  Currently, synchronization is limited to a few minutes while Lr Mobile is in the background.  -Guido

• Now that the utility install cleanup is no longer available, what are my options to uninstall a program that cannot be uninstalled using the standard method?

  I have three programs which cannot be uninstalled using the standard method (Control Panel > Add / Remove Programs); they are Adobe Reader 9.3.4, update of Java 6 and Java 6 update 24. What are my options for removing these programs from my system? I did a search on the internet and all the answers say to use the standard method, or they point to the Microsoft Installer Cleanup (msicuu2.exe) utility. I found sites that claim to have the software available for download, but I am wary of loading the software of a site, that I don't know.

  I have three programs which cannot be uninstalled using the standard method (Control Panel > Add / Remove Programs); they are Adobe Reader 9.3.4, update of Java 6 and Java 6 update 24. What are my options for removing these programs from my system? I did a search on the internet and all the answers say to use the standard method, or they point to the Microsoft Installer Cleanup (msicuu2.exe) utility. I found sites that claim to have the software available for download, but I am wary of loading the software of a site, that I don't know.

  Revo Uninstaller (free): http://www.revouninstaller.com/revo_uninstaller_free_download.html

  The MS Installer Cleanup Utility is available at http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html , that it is a safe to download site from.  Based on warnings from Microsoft on the cleanup utility, however, you might well advised to make a backup disk image or at least a backup of the registry before using it.  C:\WINDOWS\ERUNT is an easy to use free registry backup tool.

• IP address of the VPN client must demonstrate external IP of ASA 5505

  Hi guys,.

  We have a small project with the Government which has some difficult requiment with security.

  Current situation;

  1 site the Government has allowed a public IP address of our company to access their server in-house.

  2. in our office, staff can connect to their server using RDP by Cisco ASA 5505 I configured with two or three clicks.

  3. this ASA was outside (public) Government of authorized IP address.

  Request amended;

  1. given the increase in the tasks, our staff must have access to the Government of the home server.

  2. Government will not grant vpn access to them directly.

  3. they ask us to provide our staff VPN then RDP access to the Government site.

  I have install VPN and it connects very well with no problems just for the connection itself.

  But if I check using www.whatismyIPaddress.com, he demonstrated local IP address that they got by their ISP not CISCO ASA 5505 outside the interface.

  The problem is unlike Microsoft ISA 2006 VPN which shows the external public IP address when a client connects to the VPN server, Cisco vpn client shows that it is the local IP address that is not in its list in the Government site.

  I'm more like Ms. guy then Cisco as I did ' t have a lot of chances to play with Cisco, sorry about that.

  Is that what I missed in the middle of config or needs a setting more to achieve this?

  How can I make client VPN to show it's IP address to the interface of Cisco ASA rather than the IP address of the local ISP?

  Thanks in advance,

  Charlie

  have you added "same-security-traffic permit intra-interface" like I said in the previous post?

• Cannot ping via the VPN client host when static NAT translations are used

  Hello, I have a SRI 3825 configured for Cisco VPN client access.

  There are also several hosts on the internal network of the static NAT translations have a services facing outwards.

  Everything works as expected with the exception that I cannot ping hosts on the internal network once connected via VPN client that is internal IP addresses have the static NAT translations in external public addresses, I ping any host that does not have static NAT translation.

  For example, in the example below, I cannot ping 192.168.1.1 and 192.168.1.2, but I can ping to the internal interface of the router, and any other host on the LAN, I can ping all hosts in the router itself.

  Any help would be appreciated.

  Concerning

  !

  session of crypto consignment

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group vpnclient

  key S3Cu4Ke!

  DNS 192.168.1.1 192.168.1.2

  domain domain.com

  pool dhcppool

  ACL 198

  Save-password

  PFS

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set-SECURE 3DES esp-3des esp-sha-hmac

  !

  Crypto-map dynamic dynmap 10

  86400 seconds, life of security association set

  game of transformation-3DES-SECURE

  market arriere-route

  !

  card crypto client cryptomap of authentication list drauthen

  card crypto isakmp authorization list drauthor cryptomap

  client configuration address card crypto cryptomap answer

  map cryptomap 65535-isakmp ipsec crypto dynamic dynmap

  !

  interface GigabitEthernet0/0

  NAT outside IP

  IP 1.2.3.4 255.255.255.240

  cryptomap card crypto

  !

  interface GigabitEthernet0/1

  IP 192.168.1.254 255.255.255.0

  IP nat inside

  !

  IP local pool dhcppool 192.168.2.50 192.168.2.100

  !

  Note access-list 198 * Split Tunnel encrypted traffic *.
  access-list 198 allow ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255

  !
  Note access-list 199 * NAT0 ACL *.
  access-list 199 deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255
  access-list 199 permit ip 192.168.1.0 0.0.0.255 any

  !

  Sheep allowed 10 route map
  corresponds to the IP 199

  !
  IP nat inside source map route sheep interface GigabitEthernet0/0 overload

  !

  IP nat inside source static 192.168.1.1 1.2.3.5
  IP nat inside source static 192.168.1.2 1.2.3.6

  The problem seems to be that static NAT take your nat exemption.

  The solution would be:

  IP nat inside source static 192.168.1.1 1.2.3.5 sheep map route
  IP nat inside source static 192.168.1.2 1.2.3.6 sheep map route

  HTH

  Herbert

• How the PopUp open for every 15 minutes until the user saves data

  Hi all
  
  I'm working on an application where I need to open a popup for every 15 minutes until the user saves data and stop after users register data. I'm not able to get the idea on how it could be done. Please post some views in which it could be done.
  
  Thanks in advance.

  Hello
  an alternative is the uncommittedDataWarning property is one out of the box functionality, but don t has setup time.

  https://blogs.Oracle.com/Shay/entry/warning_of_uncommitted_unsaved_changes

  If not, you can use an af:poll in combination with a pop-up message

• Ports must be open on my router to allow function on SBS 2008 Remote Desktop?

  It works very well internally, but there is no response when I try to access it from the Internet.

  Hi Dick,

  The question you posted corresponds to remote desktop Services, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• What are some editing apps good free photo for Mac, other than the Photos of Apple?

  Hi everyone, I'm looking to see what free apps, you guys use for editing photos?  I have a photography class to come and play with options other than the use of pictures of the Apple app.  Nothing against the app, I just learn more.  Thank you.

  Strange question to the users of the forum pictures - of course, the answer is Photos for Mac

  Photos is optional and if you don't like it, then, Google is your friend

  LN

• What dependency service or group must be enabled for ICS start the firewall can be turned on

  Uninstalled BitDefender 2012 and installed Microsoft Security Essentials.  I tried to activate Windows Firewall and got: "Windows Firewall setting cannot be displayed because the associated service is not running. You want to start the Windows Firewall / ICS (ICS) service. Press Yes and I get Windows cannot start the Windows Firewall / ICS (ICS) service. This option is OK. Hit that and I will return to the window Security Center in Control Panel. Tried to manually turn on ICS and got error 1068: the dependency service or group could start. What service and / or the Group?

  It was more than a notice of an answer to the question I posted earlier to not be able to activate Windows Firewall once I uninstalled Bit Defender and installed MS Essentials.  Sorry that if I crossed all the protocols forum this is my second attempt to get a question an answer, luckly I kind of figured it by myself.  Thanks for the response if and the offer of future assistance.

  I you merge your two threads, but your problem is perhaps due to incomplete removal of BitDefender.

  -steve

• Material: What i7 processor and motherboard can pay me for my construction Assembly of the machine?

  I work with the PC. I am running with a first-generation i7 980 x, a processor in a motherboard that is nice, but dated from 6. I was not told that the second generation i7 half price was a processor much better for video. Nevertheless, I held five years after my investment.

  Recently, I wanted to upgrade and my neck of the bottle is in my hard drives. I have one zero RAID but it is only syncing Seqential reads 295 MB/s and writing 304. When I run the process on one screen and work first on the other, I see that whenever there is a hiccup during playback, and what hard drive not show up where my RAM and CPU are not.

  To set the soft hard drive configuration that I have; I wanted to set up a RAID 0 SSD some for awhile. But I've been holding. I'm glad I did I think because now I want to jump on the PCI. E 3.0 SSD. My current motherboard's PCI. E 2.0. It is also a neck of the bottle in my video card (MSI GeForce GTX 680 N680GTX Twin Frozr 4 Video Card - 4 GB GDDR5, PCI-Express 3.0(x16))

  So I want a new motherboard to unleash the potential of my video card, hard drive and RAM DDR4: Intel 750 series AIC 400 GB PCI-Express 3.0 x 4 MLC internal Solid State Drive (SSD) SSDPEDMW400G4X1 - Newegg.com

  Does anyone have any suggestions on a particular processor and motherboard should I consider? I've been watching this processor Processor Intel Core i7-4930 K Ivy Bridge - E 6-Core 3.4 GHz LGA 2011 130W BX80633i74930K Desktop - Newegg.com or this one I think I like better: http://www.newegg.com/Product/Product.aspx?Item=N82E16819117403

  Still no idea on a very particular motherboard. I guess one with several PCI. Slots E 3.0. I'll be in touch with ASUS to see if they have suggestions based on my desired material (which I have of him up to this day).

  Using CS6 or CC 2015? What the media, how many layers and what kind of effects, if necessary use you? (certainly talk about third-party plug-ins)

  If you are overclocking your 980 x now?

  East of 400 GB really enough workspace for all your files? (media, projects, zero/cache/swap and export)

  I know I am asking a lot of questions, but these things make a difference any on a few recommendations. Workflows and different tax brackets the PC in different ways.

  Recommendations of a general nature you could do now or more later:

  -If you have machines to slot/ports available in your current motherboard, there is no reason to wait for a new system add a PCIe SSD or 2 x 3 table SSD RAID 0 x (those can be convincing solutions still too)

  -Intel 750 1.2 to is on sale at Micro Center now for $649; I find this a really compelling case for that price - very fast, very reliable and compatible with multiple systems (M.2 solutions are more cutting edge, running more hot and seem to be less reliable in reading the user comments)

  -Not the fastest or most recent, making x 2 or x 3 (or more) RAID 0 arrays with the best drives SSD (Micron, Samsung 850 Pro, Intel 730) is a large enough to go so way too long as you have enough ports SATA; Here, too, you could do it now... a SSD RAID 0 array could still be hot fast when compared with your rotation on your old SATA ports

  -If you run CC 2015, it seems to me that Adobe has been out more our GPU if you always use the CS6. So, if you're on 2015 CC, you can upgrade to a 970 GTX or better and continue to use the GPU in a generation of new and future. BTW, I seriously doubt that your GPU is limited by PCIe 2.0, its just not that fast!

  New recommendations to build:

  -Think that Asus x 99 build (Deluxe, x 99-e WS or V Rampage)

  -Intel i7 - 5930 k or i7-5960 x (quick, easy to overclock 8 strands)

  -32 GB of RAM if only use body (64 GB so also use After Effects)

  -new GPU (GTX 970, 980, or 980-Ti)

  -If you do not upgrade to a 99 x new system (that's what I would say from a generation previous fast 6-core CPU), then Samsung 950 m2 512 GB drive can be the way you want to go

  -personally, I like the speed of the drive, but find 400GB, 512GB a little limiting

  Kind regards

  Jim

• Need help Urgent, a Site on the 2 areas, edge of animation works only for a single domain (not the domain clients)

  Hello

  need help with something really strange.

  I create a Restaurant website: www.arkadasch.de

  I test on my server the Site: www.bbaur.com/arkadasch

  As you can see I got the top of the page an element Ede animated.

  When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.

  I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?

  I downloaded the same site two areas and it is always the same. My only he is on the right.

  I have delate my cache also.

  Someone has an idea?

  WOW-found the error.

  The name is written 'o'. and the psd file is named «Özden»

  I have change the name of "ozden" to "zden', delate the German symbol 'o'.

  Modify the edge of animation, save again, insert into Adobe Muse and now it works