What are the double wavy lines in my status bar?

Similar Questions

• What are the causes extra line

  Can someone explain why I get an extra line in the following sql results
  
  Select 'test1 ' | Chr (10) | "' test1 ' double
  Union select 'test2 '. Chr (10) | 'test2' from dual
  
  results:
  _ 'TEST1 ' | CHR (10) | ' TEST1'_
  Test1
  Test1
  * <-source this blank line? *
  test2
  test2
  
  expected results:
  _ 'TEST1 ' | CHR (10) | ' TEST1'_
  Test1
  Test1
  test2
  test2
  
  is any way to get rid of blank line?
  
  Thank you
  Wayne

  Hello

  I guess you want to come in from SQL * more?

  You will need set the record separator:

  SET RECSEP OFF
  

  By default, a single line of the default record delimiter (a white) came out to where the record contains a wrapped line.

  Published by: odie_63 on 19 July. 2010 20:14

• What are the blue lines in the edition of flex?

  What are the blue lines in the edition of flex?

  They are markers of flex tempo... Info of tempo based inserted automatically embedded in the file. If you want to remove

  Edition->-> remove tempo tempo. -then reset flex markers

• What are the options I have to 'in' sound on a new iMac?

  What are the options I have to 'in' sound on a new iMac?

  Almost all recent Macs I've seen have a Line In port which can either accept a stereo 3.5 mm to RCA, stereo input analog line or a Mini-TosLink digital connection for S/PDIF (2 channels).  If you need more audio input or need to enter that is not as intensive machine - you will need to invest in an audio interface.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What are the units of the DAQmx meter?

  Hello

  I created this VI and several others like it, a few months ago, but I forgot some of what I have at the time.  I believe that this VI should measure period, using the counter on the chassis of the acquisition of data.  Can someone tell me the units of the measurement period?  I think it's seconds, but I am trying to find a way to understand this!  The period values are generated by the DAQmx READ function in the WHILE loop.  What units that work out in the table?  What are the units of the elements of the array, essentially?  See the attached VI.

  In addition, how do you know?  I opened the DETAILED HELP for the DAQmx Read (minimum 1 D NSamp DBL) shows the VI but, I can't find anything on the units of data coming out of the Terminal marked data with the orange wire, which is actually an array of periods, and we take the average of the most recent measures period 15 or more.

  I had a suggestion months ago for a line OR manual containing a description of the measures of buffering EdgeCounting, but when I went to find it, the link had been changed by NEITHER, so I find that manual, but I think the answer is probably there because I remember this manual is very helpful when I've done it before.

  Thanks for the tips.

  HI dav2010,

  When you create a virtual channel, you must specify the units of the task of counter uses.  There are several options that are listed in help here:

  http://zone.NI.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxcreatechannel/#DAQmxCreateChannel%28CI...

  I'm not on a computer with LabVIEW now, but I think the default should be ticks, which is the number of ticks the time base of your device.  You can find this information in your hardware specifications.

  Kind regards

• What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives?

  What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives? -Dell Vostro 1710, my wife had to be returned to Dell, I installed its Vostro hard drive in my Dell Vostro 1710 SAME, but I don't get a menu starting double when I turn on my Vostro. (Both Vista Business operating systems are licensed separately).

  I would like to start his drive hard so that it looks like 'his' office on 'his' computer.

  Thanks for any advice.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/how-do-i-set-up-a-dual-boot-vista-and-xp-with-2/d1e95c26-0e48-4a8d-9e0f-526da19dce52?tm=1336794280998

  The easiest way is to use the DualBoot Pro.  He has the tools to write the necessary code automatically.  It is excellent for managing the tasks you want to do.

  However, you have a potential license problem.  Even if your Dell has the exact code in the BIOS to activate the copy of Windows on the hard drive of your wife, the computer is only allowed for an OEM copy.  If Dell is back after repairs then you should be OK once you have turned on the hard disk in his computer of your wife. You can delete the entry of additional start with DualBoot Pro menu,

• What are the programs should run at startup

  Paltalk I still have started from. went to windows to resolve problems by saying that I owe a lot running at startup

  Hello

  These methods allow to check what you have running at startup and use only those you need. Many
  programs will load in a start-up but really they do not need to be loaded automatically
  to work properly.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What are the best "bang for buck" upgrades for my MSI m/brd?

  Hello to you all,.
  
  
  This is post multi-question, my apologies if it is not consistent with the Protocol of this forum, I thought that it would be wiser, that post 3 different questions related to this topic. Hope somebody smarter that I can enlighten my brain electronically challenged!
  
  
  Desktop HP My p6320y came w/a updated motherboard MSI 785GM-E51 (FX) military class II. There w/4 DDR3 DIMM slots. According to the manual, I can use "dual-channel" mode What are the advantages and disadvantages between DDR2 and DDR3, & single or double channel?
  Right now, he has two modules of 4 GB memory installed in the first 2 slots (DIMMS 1 and 2)
  The manual States certainly not for Exchange DDR2 & DDR3.  So, if I want to max out my ram, & run it in dual channel mode. I need to complete all 4 slots w/4 GB DDR3 DIMMs for a total = 16 GB of RAM.
  Would execute my M/consultant w/16 GB max. two-channel mode. RAM has make my system perform significantly more fast/visibly better? Or I could use the cost of the 2 memory modules xtra in a different way to give me a clearly observable bump in performance?
  So that had him drive performance, would upgrading my current CPU (phenom quad core AM3 2.7 Ghz) to something more 3.0 Ghz, be worth the effort & produce an observable speed bump?  Or do the two would be too much to kill the M/Board of potential?
  Finally, the manual explains how overclock my FSB in 3 steps: 10%, 15%, 20%. Is this really a Hi-risk for ovr. / CLK. compared to the increase gained? Even on the low setting - 10%? Would be an additional fan counter the rise of heat, which allows a full life?
  
  
  Thank you very much for any advice, Alan

  My preference is a Samsung 840 Pro series SSD. I went from Windows from my hard drive to SSD with EaseUS Todo Backup ver 5.5 'Home' edition (Home supports cloning) which is what you need to do, in addition to your SATA I hope is set to AHCI and IDE mode AHCI is required to support the 'Trim' that all need units SSD to truly free disk space when a file is deleted.

  It was modified a Hervé 65, air, fuel injected, forced exhaust headers, great FI pistons, to the special slippers and cam, suspension, shock absorbers and transmission.

  J W Stuart: http://www.pagestart.com

• What are the inner workings of the grid in forms?

  Hi, I have some doubts, I want to know what are the inner workings of the grid in forms.

  1. how forms followed the value change in the grid?

  2. when we run the query that we will get the selected lines, then we changed some values in certain fields in the grid, how it follows the change in value? .how he knows the process is update or insert?

  It is this that my concept, when we realized the request forms will be store values in the tables with rowid.i thought a lot more, but I can't any idea on it.any help me?
  

  You just want to understand the functioning of the forms or you encounter some difficult techniques in certain areas?  If you have a hearing problem, please describe, and we can try to help.  If you try just to know how it all works, I would recommed referring to Forms Builder online help.

  In help, search for information on GET_RECORD_PROPERTY.  This part of the documentation provides a pretty good explanation as to what is happening and how to determine the current state of a folder.

  In short, when you make a change to a field that represents a recording of the db, a SELECT for UPDATE is issued.  This causes the recording to be blocked.  Actually change value, we monitor internally.  I won't go into the details on how we do here.

• What are the parameters of video export HD video format DVD.really emphasizing me.my shakes a lot.thank you.

  What are the parameters of video export HD video format DVD.really emphasizing me.my shakes a lot.thank you.

  Please see What are the parameters of video export HD video format to DVD.really noting me.my shakes a lot.thank you.

  (Double post)

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael

• What are the steps to convert any Plugin jQuery Plugin Apex?

  Dear Apex Experts,
  
  What are the steps to convert any Plugin jQuery Plugin Apex?
  
  Best regards

  Yes, you need to write make it two lines to say apex plsql and jquery and so on.

  So, just download the plugin above and install as an example and look into the plugin definition in the shared components.

  Look at the rendered (PLSQL) function

• What are the best export settings for a first Pro CS4 video HD?

  Hello!

  I had so much trouble with this issue and that's something that continually frustrates my boss. I have a HD video what are the settings for it

  23.98 FPS

  1920 x 1080, then a few lines down he says 1408 x 792

  16-bit,

  2 channels

  48000 Hz

  What should be the parameters when I do a new sequence?

  When I look into the window in Premiere Pro I constantly have to "shrink" the image to fit the window, is that something I should do or he says that the configuration of the sequence is bad?

  But more importantly what should be the parameters of export? I exported a long video of 4 minutes and the size was 1 GB, I know that it's too big.

  I need to export without losing quality and export another one which is consistent with the limits on the size of Youtube and Vimeo.

  Vimeo is 500 MB per week, sometimes I download 4 videos per week. I think that Youtube, you can download 500 MB at a time.

  I need to get the smaller size with lose the least possible quality AND the best export quality settings, so I suppose I have 3 separate issues.

  What are the best settings of sequence for HD video?

  What are the best export settings for HD without losing quality?

  What are the best export settings for the size of out about 500 MB with losing the least possible quality?

  Thank you!

  http://forums.Adobe.com/thread/713070

  On the thread that above, I used the 5th anwer, and it will take about 7 hours to export a 4 minute video :/

  All your questions are answered here.

  http://forums.Adobe.com/community/premiere/faq_list?view=discussions

• What are the advantages and disadvantages for the largest block size and

  What are the advantages and disadvantages for the largest and the smallest block size block size?

  Smaller size of block

  Benefits
  Relatively large GoodHas air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block, for small lines with a lot of chance of chaining
  access.
  Reduced block contention.
  Disadvantages
  A relatively large air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block of chaining.

  Larger size of block

  Benefits
  Lower overhead, so there is more
  room to store the data.
  Allowed to read a number of lines in
  the buffer with a single I/o cache
  (according to the size of line and block size).
  Good for very large or sequential access
  lines (for example, LOB data).
  Disadvantages
  Waste of space in the buffer cache, if you
  random access to small lines and have a large block
  size. For example, with a size of 8 KB block and 50
  size byte of the line, you will lose 7 950 bytes in the buffer
  When you make a random access cache.
  Not good for the index used in an OLTP blocks
  environment, as they increase the claim to block
  on the leaves of index blocks.