What are the exact steps for the creation of a section?

Similar Questions

• What are the steps to install new disk for Compaq Presario Notebook 61-420US

  I bought a Western Digital Scorpio Blue 320 GB Sata Hard Drive to replace the original fried.  The drive is installed.  After turning on the laptop computer, the error message was "no boot device found".

  I turned off laptop and you press F2.  I am running a test drive, the first version short then long.

  What are my next steps?

  I have the HP recovery discs?

  Thank you!

  Matthew wrote:

  I bought a Western Digital Scorpio Blue 320 GB Sata Hard Drive to replace the original fried.  The drive is installed.  After turning on the laptop computer, the error message was "no boot device found".

  I turned off laptop and you press F2.  I am running a test drive, the first version short then long.

  What are my next steps?

  I have the HP recovery discs?

  Thank you!

  Hello

  The error message indicates that there is nothing to start, it means that an operating system is not installed, or the MBR is corrupted, that is not your case. The hard drive is ok, but you must restore the system using the recovery disks, you got.

  It's simple, change the startup option in the BIOS to CD/DVD-ROM as the first one (press ESC on startup, press F10), then you can insert the No. 1 disc in the optical drive recovery. Save the settings of the BIOS (reboot), then follow the instructions (click on factory reset). It worked for me that way...

• What are the best settings to standard calibration for the XBR65X850C?

  What are the best settings to standard calibration for the XBR65X850C?

  Hi DRATCLIFFE,

  Thank you for your time to write a post.

  We are very sorry for the late reply.

  Change the picture or the sound settings of your TV depends on your preferences and on what you watch/listen to.

  You can use the settings preset for image and sound.

  In addition, to better enjoy your viewing experience, follow these steps:

  • Install the latest software update. The updated software and the driver for your Sony product are available online.
  
  
  • Set the automatic software download setting to automatically download software updates.

  Thank you
  ^ Ron

  If my post answered your question, please mark it as "accept as a Solution.

• In XP, what are the default fonts and font sizes by default under advanced appearance for these items listed below?

  What are the fonts by default and default font for these options size? I've changed them - problems. Also why can't you post a record of original fonts for users of xp with all the fonts required default? It helps users strongly tempted to extract did not work properly.
  Need default font and size for each Option below
  3D objects
  Desktop
  Caption button
  Title bar active for example. (Arial - 8) or NA if nothing
  Resident of the active window
  Context of the application
  Title bar inactive
  Inactive window boarder
  Icon
  Title bar inactive
  Menu
  Message box
  Palette title
  Scroll bar
  Selected items
  ToolTip
  Windows
  Icon spacing:
  Icon spacing V
  Thank you

  Hi Scott,.

  If you change the settings in display properties, you can change it to default by selecting the Windows XP default theme. This will change all default Windows fonts and their sizes.

  To do this, follow these steps.

  a. right click on an empty space on the desktop and then click Properties.

  b. on the themes tab, click Windows XP in the theme box.

  c. click OK.

• Where and what are the registry keys for profiles

  Where and what are the registry keys for profiles. There is a new virus/malware, which is destroy the profiles. It is not only for machines XP, but all operating systems Windows which is destroyed.

  Hi PennyLang,

  ·         What exactly is the problem you are having?

  ·         What is the antivirus installed on the computer program?

  You can run the Microsoft Safety Scanner to check the infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive. What are the steps to achieve this?

  original title: can you help me?

  My laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive.   What are the steps to achieve this?

  My laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive.   What are the steps to achieve this?

  Go to computer stores, get an external hard drive of 1 TB capacity. Ask for one that you can just simply copy and paste to transfer files.

  I have a. Digital WD Elements. 1 TB vapacity. It works very well. No action of fancy, complicated to transfer, just copy and paste or drag and drop files.

  I also use it to make Sysytem Image backup.

• A blackBerry Smartphones MicroSD card corrupt - converted files to the. Extension CH - what are the steps to convert to readable format?

  The microSD is corrupted (8gig) and not readable on Blackberry - using Blackberry Bold 9790.  Copied the files to the Windows laptop using the SD card, but cannot open them.  Majority are photos and videos.  FILE0000. CH, FILE0001. CH... FILE0010.CH.  What are the steps to convert to format for recovery of. CH files on laptop?

  These are files corrupted, made from a checkdisk utility. You can usually convert them to what whatever and I usually just delete them.

• What are the best "bang for buck" upgrades for my MSI m/brd?

  Hello to you all,.
  
  
  This is post multi-question, my apologies if it is not consistent with the Protocol of this forum, I thought that it would be wiser, that post 3 different questions related to this topic. Hope somebody smarter that I can enlighten my brain electronically challenged!
  
  
  Desktop HP My p6320y came w/a updated motherboard MSI 785GM-E51 (FX) military class II. There w/4 DDR3 DIMM slots. According to the manual, I can use "dual-channel" mode What are the advantages and disadvantages between DDR2 and DDR3, & single or double channel?
  Right now, he has two modules of 4 GB memory installed in the first 2 slots (DIMMS 1 and 2)
  The manual States certainly not for Exchange DDR2 & DDR3.  So, if I want to max out my ram, & run it in dual channel mode. I need to complete all 4 slots w/4 GB DDR3 DIMMs for a total = 16 GB of RAM.
  Would execute my M/consultant w/16 GB max. two-channel mode. RAM has make my system perform significantly more fast/visibly better? Or I could use the cost of the 2 memory modules xtra in a different way to give me a clearly observable bump in performance?
  So that had him drive performance, would upgrading my current CPU (phenom quad core AM3 2.7 Ghz) to something more 3.0 Ghz, be worth the effort & produce an observable speed bump?  Or do the two would be too much to kill the M/Board of potential?
  Finally, the manual explains how overclock my FSB in 3 steps: 10%, 15%, 20%. Is this really a Hi-risk for ovr. / CLK. compared to the increase gained? Even on the low setting - 10%? Would be an additional fan counter the rise of heat, which allows a full life?
  
  
  Thank you very much for any advice, Alan

  My preference is a Samsung 840 Pro series SSD. I went from Windows from my hard drive to SSD with EaseUS Todo Backup ver 5.5 'Home' edition (Home supports cloning) which is what you need to do, in addition to your SATA I hope is set to AHCI and IDE mode AHCI is required to support the 'Trim' that all need units SSD to truly free disk space when a file is deleted.

  It was modified a Hervé 65, air, fuel injected, forced exhaust headers, great FI pistons, to the special slippers and cam, suspension, shock absorbers and transmission.

  J W Stuart: http://www.pagestart.com

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• Try to install items with purchased 14 box serial number and system does not... What are the next steps?

  Try to install items with purchased 14 box serial number and system does not... What are the next steps?

  Are you sure have a serial number from the inside of the box, or you could have a redemption code?

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  What is the exact error message?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Can I update my single-user plan in terms of the Adobe creative team? and if so what are the steps?

  Can I update my single-user plan in terms of the Adobe creative team? and if so what are the steps?

  Hello

  Please contact adobe for the same support:

  Contact the customer service

  In the meantime, you can also consult:

  Creative cloud for teams. Adobe Creative Cloud for businesses

  Hope this information is helpful!

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• I am creating a flyer and must add five photos to document and resize them to scale.  What are the specific steps?

  I am creating a flyer and must add five photos to document and resize them to scale.  What are the specific steps?

  

  Without seeing your Flyer available, it is difficult to advise you, but if you want to build the room yourself, illustrated above approach shows how to put an image in the layout, position, and resize it.

  Fig 1. Make a selection on the page layout for the position (and possibly cropped) image format

  Fig 2. Open the image and choose the command selection > all followed by Edit > copy

  Fig. 3. Return to the layout and choose Edition > paste special > paste in the image will be probably larger than your selection when pasted into the Flyer.

  Fig 4. Choose Edition > transform > scale the scale tool appears.

  Fig. 5. Drag the frame to adjust it to a corner of the space of the image

  Fig. 6. Hold down the SHIFT key (to preserve proportion) and drag the farthest corner of scale handle diagonally downwards to reduce the size of the image to fit in the area of selection. Then click on the symbol to Commit in the Options bar to produce the result (Fig 7).

  Repeat for each of the other images...

• What are the benefits (if any) of transcoding to an intermediate editing for post production format?

  I have searched for an answer final to this day and impossible to get something useful.

  My recordings to the AVCHD format that is 24mbps H.264 video and audio camera (I record audio separately so audio is not a cause for concern). I use the following Adobe CC on Windows. I do a lot of green screen work.

  I read on many intermediate codecs designed for video editing. Include DNxHD of Avid, Apple ProRes, Cineform of GoPro, MXF OP1a, among others. As I understand it, these formats offer excellent features help video publishers to do their work.

  I was able to edit files directly AVCHD with Premiere Pro and after affects.

  My question is, what are the benefits, if any, I'd get if I converted my content from AVCHD to one of the intermediate formats before as I have start to change? It would speed up Adobe software? It would provide the best quality in the end? It would make various effects function better?

  Ultimately, all the videos I do will be encoded in the format h.264 for web distribution.

  Please note: I am not asking the workflow easier or more obvious (which is just to work with AVCHD files directly). I want to know if I can gain advantages in transcoding in another format before I in post-production and that these benefits are specifically for each of the different intermediate codecs.

  Thank you.

  Well, every format has its own advantages and disadvantages. Higher end codecs tend to be very large and take much more space, but behave better when apply effects or greenscreen work.

  However, you cannot really improve the quality that comes from your camera, it is an indispensable part of the workflow. You CAN transcode to, say, ProRes HQ and get better results with your fx work, but it will be as good as something turned on a higher end camera.

  Maybe do some tests on a small piece of video. Transcode into several codecs and do exactly the same treatment to all clips, including your original. Then compare them and see if the improvement is worth your time and additional hard drive space.

• What are the best options for the composition of math in InDesign CS4?

  What are the best options for the composition of math in InDesign CS4?

  I tried a few versions of the composition of mathematics test. All have their advantages and disadvantages, but I can't decide on which the plugin/script will be the best in the long run (in taking account of the ePub and MathML).

  
  So far the two best seems to be InMath (if it becomes compatible CS4) or Math + Magic Pro.

  
  The biggest pro of InMath is editable on the screen, but it seems to have some risk: http://InDesignSecrets.com/InMath-update-with-new-reader-functionality.php

  
  Math + Magic Pro works well with CS4, but need of equations to modify in the window of their plugin, and because they are EPS format. The file size and the ability to work with a digital player disappeared.

  And MathType seems pretty useless...

  Someone at - it had positive experiences?

  Not exactly the kerning, but you can move blocks wherever you want with the arrow keys. And you can change the spacing between the elements by changing the spacer between them. There are also defects of spacing.

  Batch edit can be something again. I use 6.0, and I see that the most recent version is 6.5.

  I had problems with files EPS of Mathtype, which may include a preview, but do not include fonts. So, I opened each equation of the word with my default settings (they automatically change the default fonts, spacing, size, etc.), copy, paste in Illustrator and save as have. So when I'm finished, my equations are always vector (if that's what you mean by text).

  Microsoft has chosen to implement a version of Mathtype dumbed-down as the editor of Word equations for many years. So for me at least, long term has already been decided. There are several things wrong with Mathtype, but given the choice between the use of Mathtype to * convert * equations and using InMath or mathemagiques to * recreate * equations, I'll take Mathtype, warts and all.

  Ken Benson

• What are the steps to use COPYAPP in planning

  I should first create a DSN for the target application? The error says "cannot retrieve the entry of the application to the target application.
  What are the exact conditions to execute this utility?

  Your source and target databases are identical, is the first thing you need to have separate databases of sql server by planning an application

  See you soon

  John
  http://John-Goodwin.blogspot.com/