What are the frequencies of the EQUALIZER custom?

Similar Questions

• Hey.Can someone tell me the best setting of the equalizer custom on the "rocket"?

  Im trying to do the quality of the sound of my "rocket" at its optimum level if someone can tell me the best setting of the equalizer custom on the "rocket"? Even if this is not the best can someone tell me what is their custom Equalizer setting?

  any help would be greatly appreciated.

  SR - rox wrote:

  WOW I didn't know custom Equalizer sucked upwards of battery most. I use a set of earbud headphones(not_sure_of_the_model_name).well sansa if you change your song to a slow, you need to change the eq to a slow to get the best result in law?, but it is really tiring to do over and over again? or is there another method?

  Thanks a lot for your answer.

  SR - rox

  No, the speed of the song has nothing to do with the equalizer. The EQ is on the sound, not the speed. Experiment a bit with the presets and you can understand a little better.

  P.S. I wouldn't trade away normal EQ as long as you use the Sansa earphones... they are OK but only capable of so much

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What are the options for 3 bit for Hw_Arm_Sel in PCI-6601 field

  Hello

  I'm programming our own driver to operate the PCI-6601. For our application, we need option arms material. I know, it is possible to use 2 counters for this, but NEITHER-TIO also supports hw_arm. Although it is not explained in the registration document at all, after some tedious verification in the DDK examples I found that the pieces are in the Gi register metering mode. I know that the position of the HW_enable as well as the position of the 3 options sellect bits PIN. What I don't know is what are the options of 3 bits for Hw_Arm_Sel field. I contacted the support NEITHER, but received no support. How can NEITHER sell boards and when a customer who doesn't use LAbview or Measurement Studio, or DDK, but implements its own driver is then so arrogant at least of NOR? Also, how can OR publish only a part of the records of the Board of support and when a customer contacts and request for some records do not get supported at all? I can't predict the missing records, and he is professional enough to document comes in part from records of 660 x Instruments. And, upon request, you have nothing.

  I hope that someone from the community are aware of this Hw_Arm_Sel 3 pin option. Otherwise, there is just one option of the error and the trial. Or simply throw away the jury.

  Dr. Kirco Arsov

  Hey, sory for the delay in my response. It works and it works very well with the description of Joe and Joe, thanks for your great help. I greatly appreciate. Now we finally also have this option as we wanted it and it works fine.

• If I create a WinPE 2.0 distribution (Syslinux or PXElinux) which will take place on one of the machines running 'something Microsoft' what are the implications of license?

  The WinPE Licensing implications

  Hello

  I have a number of customers with machines that are fully licensed with XP, XPe or Vista.
  Each of these clients have a device that we have created, piloted by drivers custom within the OS.  The operating system will sometimes funny (corruption, etc.) causing the device to not function.
  I decided to create a diagnostic utility to check whether the fault is in the operating system, driver or device.  Because the fault could be deep in the operating system, the only way I can see to do is through WinPE
  I searched the net, but can do not seem to arrive at an acceptable legitimate answer... So here's my question.
  If I create a WinPE 2.0 distribution, either for CD, USB or chain loaded from Linux (Syslinux or PXElinux) which will take place on one of the machines running 'something Microsoft' what are the implications of license? Is it legal?
  Operating system licenses are not owned by us, but our customers if we do not have mass of licensing agreements or something like that.
  The plan is to create a unique distribution and add drivers to it that we encounter different machines.  I know it's frowned upon to speak Hirens on a MS site, but something similar to that (I won't use Hirens because I want that it is completely legitimate)
  I called him to the reading of the license with WAIK, but can do not seem to find anything about this.
  Thank you

  Hello

  This is not a question of normal consumption. I suggest you to contact our Legal Department for legal terms Express. http://www.Microsoft.com/about/legal/en/us/default.aspx

  I also suggest that you send your query in TechNet and check.

  http://social.technet.Microsoft.com/forums/en-us/operationsmanagergeneral/threads

• What are the drivers, I need to connect to the internet for a GT5432 of operating Windows XP and not Vista?

  I asked before, but try to reformulate my question. In my opinion, it miss a driver I need or have bad installed. (of the re - install after a storm)

  Charter, my I, said that there is a problem with my drivers or the Ethernet connection. I installed a new Ethernet connection-SMC1244TX. Still no connection.  I called SMC customer support number - they me Charter connected - which gave me the number to the catwalk, who want to $99-149 to ask a question because it is not under warranty, because someone changed the Vista to Windows XP, I thought I found the download for the correct drivers, but when I put my flash drive on GT5432 - I was not able to get the files-now I can't locate the download again.

  So what are the real drivers that I need on the GT 5432 operating Windows XP so you can connect to the internet?

  I just skimmed the old thread. It's too long. I think you should have stayed there.
  This has probably already been given to you in the old net but that's...
  Go to http://www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_USA&productCategory=9&modelNumber=1537&partNumber=0&downloadType=1&knowsPartNumber=false and download the driver. You will need your card, part number. He also says it's a SMC1244TX-1. Don't know if it's the same thing as what you have.

  I can offer help any more than that. If you need additional help, go to the old thread.

• Hardware change - inform them where and what are the details to be informed

  Hello!

  I want to use my hard drive, change the map motherboard and CPU only. Who should I email and what are the details I need to provide to get my two windows xp and vista activated and validated after having reformatted and re-installed?

  If I happen to call by phone I phone number of the customer care person knowing Tamil language?

  Kind regards

  Components

  You must notify anyone.  If you have problems activating automatically after the changes, do it manually.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I update my single-user plan in terms of the Adobe creative team? and if so what are the steps?

  Can I update my single-user plan in terms of the Adobe creative team? and if so what are the steps?

  Hello

  Please contact adobe for the same support:

  Contact the customer service

  In the meantime, you can also consult:

  Creative cloud for teams. Adobe Creative Cloud for businesses

  Hope this information is helpful!

• Our company is buying 14 items first.  What are the options to purchase necessary on 6 different PCs and how much it costs?

  Our company is buying 14 items first.  What are the options to purchase necessary on 6 different PCs and how much it costs?

  hisashiy

  This isn't Adobe. Rather a user to user forum. You must contact Adobe Store Sales for the information you are looking for.

  With it, you will discover licenses in volume compared to purchasing individual licenses. On the individual side, Adobe allows the 'client' use the same bought computers activated serial number on no more than 2 of the 'customer' and then not use both at the same time.

  Premiere Elements is not sold on subscription, as are the applications under the creative cloud.

  Please see the Adobe web site, or the following link contains the contact information you need.

  Adobe | Of requests for the

  RTA

• Seting keyframes to move a mask, what are the Red handles, and why can't I move the mask.

  So, I have a mask I want to track manually. I put a keyframe, and then as soon as I move down the clip in time, the handles on the mask all the Red Tower, I can't move anything. What is c.

  I must be in Auto key. If is not very intuitive to manually follow a mask. Can someone explain what I got. When I put a keyframe, it also always affects a red keyframe at the beginning of a clip.

  OK, so if I put on auto and then change the mask a little to set the first keyframe and make a few adjustments it works fine. TEEN Style!

  I guess that's the best solution. Use Auto and adjust as required.

  But for reference, what are the Red handles that is supposed to mean. And is there a tutorial for manual monitoring mask.

  Also how do a mask drawing good hand, when I click on the + curve and make points, then the expanded mask gets all hexagonal... What is happening with that. you have to start with a round mask and add points and tweak from there to make a mask customized with adjustable smooth edges?

  Seems to be the only way I can hack through for now. Again, please to a good tutorial on the masks and the points, I have an account of Linda, if that helps.

• What are the elements appear on the screen of the ATV 4

  What are the elements appear on the screen of the Apple TV4

  Initially just the settings and a few applications for iTunes movies, music, TV shows etc, then this is all the apps that you download from the store.

• What are the new products by apple

  What are the new features that are available on the market designed by apple. Other than the products of hardware its iPhone, the smartphone and the Tablet I want to know about the software of the computer and online services.

  Here you can find official information on the new products http://www.apple.com/newsroom/

• What are the "exclusive" for the version of the Apple Watch Nike Siri?

  I'm interested in the Nike + version of the series 2 Apple Watch, but not knowing if additional features are really a selling point for me. I have connected more than 2000 miles on the Nike application on my iPhone, so I will definitely stay with the same application on the watch... but what are the commands of Siri for Nike + which won't be available for non-Nike version?

  Hello

  During the keynote of yesterday, it was mentioned that a shortcut to start a race is just tell Siri to 'run '.

  In addition, neither Nike nor Apple has yet specified what are the other commands.

• What are the two icons to the left of the indicator in the mac mail (arrows and circle)?

  What are the two icons next to the flag in the mail from mac (arrows and circle)?

  I can't understand what they're doing. Thanks for any help!

  If you are referring to the registration of the preview, the arrows appear when you Replied (curved) or transferred (right arrow) by e-mail.

  The circle, when rempli filled in blue, indicates you have not yet opened / read the email.

• What are the keyboard shortcuts for MacBook Pro?

  I recently got a MacBook Pro with the Retina display, I was wondering what are the shortcut keys?

  Click here for the list.

  (143852)

• What are the causes my screen to instantly display several small pages?

  What are the causes my screen to instantly display several small pages?

  Your username appears to be rather ironic.

  Given the richness of the information you provided, I guess, whatever the version of Pages that you use, you've opened the model selector.

  Peter