What can I do I have problem with my debit in Greece card

Similar Questions

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• I have problem with my iphone 6 s when I want to download on AppStore or go to error code wiil online games just 1009 I don't no what to do? Please help my ios is 9.3

  I have problem with my lphone6s when I want to download or go online or on wifi error come (code 1009) Please help I don't know what to do?

  1009 error means that you are trying to download on the app store in a

  country other than the one you are located in or from one another AppStore

  that you have an account. That error can also mean that you

  are in a country that is blocked.

  In which country are you physically located? In which country is your

  iTunes account? Which store AppStore/iTunes to the country you are

  try to download from? What VPN do you use?

• I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...

  I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...

  Where did you buy this phone? 4G has already worked on this phone? Whatever the carrier said when contacting you? Have what troubleshooting you tried?

• I have problems with my iTunes account, I can't sign on the App Store and change my password, how can I fix it?

  I have problems with my iTunes account, I'm unable to download apps from the app store or any other product related to Apple. I changed my password and still does not work. How can I fix it?

  How and when did you try to connect for example you just enter the new password when you try to download something, or if you have completely connected exit since the change of the password and try to connect again: what to do when you have changed your Apple ID email address or password - Apple support ?

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• I have problems with downloading the Lightroom app! What is the location of the appropriate installation?

  I have problems with downloading the Lightroom app! I have already many programs Adobe works on my PC and I have a cloud of Adobe license. But now, with the installation of Lightroom, I get the following error:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF014...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.

  ERROR: DF014: unable to create the symbolic link to ' \\XC-DC-01\Users\Patricia\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).

  When I go to the solution, then it says: rerun the installation. Select a different installation location.

  
  

  But I tried to select all the other folders on my computer for the last two weeks and it still not working? Update other programs is not a problem, then I don't understand what goes wrong? What is the location of the appropriate installation? Why it changed on my computer?

  Can you help me with a solution? Thank you!

  Hello

  Please see Exit Code 7 Installing and errors ' Exit Code: 6 "," Exit Code: 7 "|"» CC, CS6, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Hi, I can't save all plunge on Icloud? This is the new update of softwer have problem with that?

  Hi, I can't save all plunge (6 IPhone / IPhone 5 / and my ipad on Icloud? is the new update of softwer have problem with that?)

  (1) disconnect from the iCloud and reconnect and try backup

  (2) backup on iTunes then restore the device to factory settings. Try the backup in iCloud. If it works, restore your device from the backup you made to iTubes

• I think I'll have problems with registry - I can't add or remove programs, when I rebooted until windows starts I have SEEN 150/150 REGISTER... any ideas

  I had to restore my computer from these problems, had problems with wire4less router cause took off so wireless cause I got no internet.  Has worked with the provider, Charter and got back internet but do not add or remove programs - have problem with printer HP TrayApp, s if lack but cfan can't add restricted cause - restricted user-entered and gave access, but still does not work.  Will try F8 and start the repair to see if it works.  Any ideas?  HELP... l.Thanks

  Thanjs - I did take it to someone to clean.  Always have problemd with printer but am back to him.  Thanks for all your suggestions.  I guess I've done too many bugs diffedrent and messed up.

• Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to Inte

  Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina

  Hi Nina,

  This link might help: cloud creative activation and troubleshooting of sign-in

  Kind regards

  Sheena

• I have problem with my account. I did uptade my assinature to 27/08/2015 and my photoshop is blocked, because the date for uptade is with 22/09/2015. I need urgently. What do I do? Thank you

  I have problem with my account. I did uptade my assinature to 27/08/2015 and my photoshop is blocked, because the date for uptade is with 22/09/2015. I need urgently. What do I do? Thank you

  Hi Camila,

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• I have problems with the installation of Add-ons for InDesign CC 2015. How can I reinstall InDesign CC 2014?

  I have problems with the installation of Add-ons for InDesign CC 2015. How can I reinstall InDesign CC 2014?

  There's direction at the bottom of this blog post: http://indesignsecrets.com/avoiding-problems-installing-indesign-cc-2015.php

• I have problems with the mail (El Capitan)

  I have problems with the mail

  See writing an effective communities of Apple support question.

  Without knowing what are these problems there is no way we can really help you.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• I have problem with concept in labview

  I have active control of noise from project using speaker to cancel the noise I have problem with the cancellation of any suggestion I will apperciate that. the code attatched so you can see and tell me what's wrong thanks in advance

  Hi Ali,

  I have problem with the cancellation

  What kind of problems? Could you describe them a bit more detailed?

  What is evil

  No doubt 'evil' is the part of your code:

  

  Why dou you need 4 functions where a simple IndexArray will do the same job? (This style of programming is called Rube Goldberg...)