What can I do to make my Satellite L750 run faster?

Similar Questions

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• What can I do to make the program to run in WIndows 7 it says "incompatible".

  Original title: Programs compatibility Application Applications Apps game games Legacy Crash crashes Hang Application crashes.

  I have a window 7 but a version 6.1 program does not run in it. He says it's incompatible with the program. What can I do to make the program work?

  Hi Tony,.

  For you help I would be grateful if you could answer the following question:

  What program are you trying to install?

  I suggest you to install the program in compatibility mode and check.

  Make older programs in this version of Windows

  Most of the programs created for earlier versions of Windows also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try to change the program compatibility settings, by using the program compatibility problems or manually choose compatibility settings.

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the link.

  Help with Windows 7 compatibility issues

  http://Windows.Microsoft.com/en-in/Windows7/help/compatibility#T1=softwarecompat

  Program Compatibility Assistant: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Program-Compatibility-Assistant-frequently-asked-questions

  For more information, see the link

  Find Windows-compatible programs

  http://Windows.Microsoft.com/en-in/Windows7/find-Windows-compatible-programs

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• What can I do to make my wifi signal is getting better?

  What can I do to make my better wifi signal?

  The distance is the problem more obvious - there is a certain optimal range that the wireless signal can travel. If the network is covering an area larger than the router is able to transmit, or if there is a lot of corners for everyone and walls to penetrate, performance will take a hit. Interference is also a big problem, especially for those living in densely populated areas. Signals from other wireless networks and electronics can impact speeds, that can the physical obstacles, such as walls.

  You can always look at your router administrator interface to see how many devices are connected. Or use a network Analyzer to see if you have unknown machines on your network. If it is a network that is open, close it. Configure security - preference WPA2, WEP is not as strong and put in a password that is difficult for others to guess.

• Before that I only had to type "IMDb" and press enter and put me to the site immediately, but now all these links come first. What can I do to make it like it was before? And my Norton safe password does not appear in firefox.

  Before that I only had to type "IMDb" and press enter and put me to the site immediately, but now all these links come first.

  Or I used to type 'youtube' and after knocking entered, I was took directly to the homepage of youtube.

  What can I do to make it like it was before, so it takes me directly to the site? Second, my Norton passwords and user names for all sites that have been stored in my 'Norton safe"does not appear in the browser. This will be available soon?

  Try to define your topic: config entries for:

  • Keyword.Enabled - > true
  • keyword. URL->http://www.google.com/search?ie=UTF-8 & sourceid = navclient & gfns = 1 & q =
  • Browser.Fixup.Alternate.Enabled-> true
  • Browser.Fixup.Alternate.prefix-> www.
  • Browser.Fixup.Alternate.suffix-> .com

  and then restart your browser and try again supernatural imdb.

  You must use 'supernatural imdb' rather than "supernatural imdb" because you want the domain before the page for research work best.

• I have a bank I have to use Google's browser instead of safari to be able to download and view my monthly statement.  Auto-complete in safari on id and psd won't AutoFill to this browser.  What can we do to make it right?

  I have a bank I have to use Google's browser instead of safari to be able to download and view my monthly statement.  Auto-complete in safari on id and psd won't AutoFill to this browser.  What can we do to make this right?

  I have safari 9.0.2 have a MacBook Pro.  OS X El Capitan version 10.11.2 for operating system

  If they are having problems with the Safari browser, you must contact the Bank to know if their site is compatible with Safari.

  Good day.

• What can I do to make my Photoshop work?

  Hi, I'm a mac user. I bought the Creative Cloud student and teacher edition year version on September 9, 2015, but I can not activate and validate it. He said that the subscription cannot be found. Now, I can't use Photoshop and the rest of the Creative Cloud products. What can I do to make it work this time the my Photoshop?

  

  

  

  If this isn't what you expect to see under your account, contact adobe support during the time pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  Yes, Photoshop should work fine without the internet connection, as this is the standalone version.

• My CS6 after effects of Premium Suite CANNOT be used with OSX 10.10.2?  What can I do to make this work?

  My CS6 after effects of Premium Suite CANNOT be used with OSX 10.10.2?  What can I do to make this work?

  Install the After Effects CS6 (11.0.4) updated:

  http://Adobe.LY/DVA_updates

• I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  Copy the program through a new machine will not work.   Install it using installation files and activate using the serial number assigned to the license.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

• Any 1 can show or learn how to optimize and run faster my WRT160N

  Hi there pipol any1 can show how to optimize my router WRT160N run faster? my firmware downgrade already to build 8. also my setting is WPA2. I had only to the laptop connected to this wireless router, 1 is N and another G. sometimes I feel my connection is slow, and also each time I visit this site my connection linksys was teeming I have not now why? but the other site I do not feel one. Thanks in advance for help.

  Try to make the settings wireless advanced as change the beacon interval = 50, Ahmed Frag = 2306, Ahmed Rts = 2307 & then also reduce the MTU size to 1365 in order to increase the speed on the pc.

• I did all the changes suggested in the config: to get this tab of the tile to disappear, but nothing changes. What can I do to make it go away permanently?

  I have my preferences configurΘ for dΘmarrer FF with a blank page. Today he just start with the white page then immediately open a tile top page in another tab.

  I made the topic: config thing (including promising to be careful) and have browser.newtab.url value: blank and browser:newtabpage.enabled set to false. But everytime I open a new browser window, I still get a tab opening top tile. And whenever I click on a link in a page, the link will open and a tile tab will open immediately above.

  It drives me crazy. I want things back to normal and this thing tab tile disappear permanently. I never want to see him again. What can I do else? Thank you.

  If you click on the Details link for more system next to your message, you will see that you have the extension "MySearchDial". You must remove this first, since it is installed in the Windows and Firefox will keep finding.

  Open the Control Panel, uninstall a program, then click on the column heading "installed on" in order to put the most recent additions at the top. Search for MySearchDial and anything that seems suspicious or unnecessary that was installed at the same time, probably as part of the bundle undisclosed. Out the trash as much as you can. Then you can proceed to clean up your browser (s).

• Where can I find drivers for my Satellite L750-21F?

  Hi all

  I have a Toshiba laptop without OS and I want to install my Windows 7 (64 bit) but I can't seem to find the drivers: s
  Any help or links please?

  Here his name and code:
  Satellite L750 - 21F
  Product code: PSK30E - 05H00EG4
  I do not particularly see to install WiFi drivers: s
  Any help would be really helpful thx

  You can download the drivers on Toshiba http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp page
  WLAN driver can be downloaded from the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Do you know what WLAN card inside?

• How can I turn on keyboard on Satellite L750 light?

  I just bought this laptop new earlier today. the light of the keyboard did not work at all since I put the laptop on. I tried holding FN + Z (with the eco on and outside position), but it did not work.

  I tried to type 'keyboard' and 'light' in the start search bar too, but I still have not found the settings to turn it on.

  Help, please!

  It's really hard to type in the dark...

  Hello

  What Satellite L750-xxx you have exactly?
  Are you sure that your laptop model is equipped with the keyboard backlight?

  As far as I know not all models support this feature.

• How to make this simple sql run faster?

  Here is a very simple sql, but it takes too long to finish as an hour or more, and the problem is in the table. It's a huge table with 17660025 lines.
  In addition, upd_dt is indexed.

  select distinct (dstn_type) from ims_ets_prty_msge where ims_ets_prty_msge.upd_dt > sysdate - 30;

  Execution plan seems to be no problem: (is 9i, and I do not think that it would not perform better if the UNIQUE HASH is used instead of SORT UNIQUE)

  -----------------------------------------------------------------------------------------
  | Id  | Operation                    |  Name                    | Rows  | Bytes | Cost  |
  -----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT             |                          |     6 |    78 |  1409 |
  |   1 |  SORT UNIQUE                 |                          |     6 |    78 |  1409 |
  |   2 |   TABLE ACCESS BY INDEX ROWID| IMS_ETS_PRTY_MSGE        |   856K|    10M|    10 |
  |*  3 |    INDEX RANGE SCAN          | IMS_ETS_PRTY_MSGE_INDX5  |   154K|       |     2 |
  -----------------------------------------------------------------------------------------
   
  Predicate Information (identified by operation id):
  ---------------------------------------------------
   
     3 - access("IMS_ETS_PRTY_MSGE"."UPD_DT">SYSDATE@!-30)
   
  Note: cpu costing is off

  Here is some info on the table

  NUM_ROWS BLOCKS  EMPTY_BLOCKS AVG_SPACE CHAIN_CNT AVG_ROW_LEN
  17129540      455259     622           502             455278      188

  The thing is that we must make it run faster.
  And all I can think is to create a bitmap on dstn_type (low cardinality) index and partition the table using upd_dt;
  
  So my question would be is anyway that we can get a better response time without having to make that kind of change?
  Or is this kind of change really help?
  
  Any thoughts would be appreciated!
  
  Thank you

  Have you thought about putting an index on (upd_dt, dstn_type)?

  With the query you posted, and this index, it should be possible to use a full scan of the index, no visit to the table at all.

  A bitmap index would not be a good idea, if it is an OLTP application / table.