What does REFRESH do? What is its purpose?

Similar Questions

• What is the SmartHeap library, and what is its purpose?

  Recently installed a version of Corel Draw 8 on an Acer laptop with Windows 7.  Program seems to work very well.  Laptop seems fine, but it comes up with a "smarheap library mem_bad_handle" notice whenever the laptop is started.  It can be removed without problem, but I don't know what this means, and what needs to be done.  Thank you.

  Installed with Corel, trying to repair the installation of Corel

• Windows Vista player - D labelled "Recovery" what is its purpose? Why is it complete?

  This computer is 3 years old. Until recently, the D drive was essentially empty. Now, it's almost filled to capacity.

  Hello

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• What is the purpose of the record $Recycle.Bin?

  Original title: $RECYCLE. BIN folder in the HP recovery partition

  I have a $RECYCLE. BIN' folder in my HP recovery partition. What is its purpose and when is created (it says it was created on 24/01/2011) or modified (modified 19/09/2012)? I also noticed that the "date modified" this issue is very close to the first date of start of the user. Also I did a system recovery and the "update" of the file remains the same. Why is it so?

  It has three subfolders (4, including the Recycle Bin). The "modification date" for these issues seem very remote. one is dated 24/01/2011 the other 17/11/2011 and the last 11/01/2012. What are these subfolders for? the date of creaton of the trash is identical to its "update.

  Sam.

  See paragraph 10 of the http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&cc=us&lc=en&dlc=en

• What is a try... catch... Finally and its purpose?

  Hello

  I'm new to AS 3.0. Can any body explain to me on the use of try... catch... Finally and its purpose

  any help or tutorials pls.

  Thanks in advance,

  @flash

  It is used to encode something that might not work and when it fails instead of having an unhandled error, the error is handled in one of the directions taken or the branch finally.

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• What is the purpose of srvsvc.dll?

  Hello

  I came across the srvsvc.dll file and after some further research, I've identified this dll in the form Server Service DLL from Microsoft.  The problem is that I can't find any documentation that clearly indicates that that is the purpose of this DLL.  I read on some forums that this dll is responsible for remote sharing features, but I can't seem to find an answer very clear.  I was hoping that someone out there could explain either what the main purpose of this DLL is or point me to documentation that explains it.  I've Googled it many times and most of the success is not to explain its function or go into great detail on this subject.  I want to really just in a few sentences just describing the srvsvc.dll.  I would appreciate greatly any help out there, anyone can give me.  Thank you.

  Hello

  Are you facing any problem with the srvsvc.dll file?

  This service is responsible for loading the server at startup services. However, some viruses can usurp to be file system.

  LanmanServer (Server service, SERVICES. EXE loads SRVSVC). DLL.

  Reference: http://technet.microsoft.com/en-us/library/cc751441.aspx

  Note: the Information provided in the link is for Windows NT.

• What is the purpose of Livecomm.exe and Skydrive.exe

  What is the purpose of the two of them?

  Is Livecomm required on W8 for synchronization of Skydrive?

  How can I permanently stop Livecomm?

  It sounds like a great answer but is not an answer to the question. Files exe is at the heart of the app for Live services. The suspended state may or may not be defined according to the app. If no activity is required by an application, then it will call to suspend. It can also wake up and not be suspended. Suspended has nothing to do with anything. All EXE can be suspended, but metro apps call to suspend design.

  A metro app is an executable that runs in the sandbox of Metro. Other than that, it is still an executable and still works as a. Consider a process running under the control of the session the subway, but it's still just an app with a new fancy name (aka Apple). If I look at the Task Manager will see all kinds of processes that are suspended. Many have nothing to do with the subway.  What I'll see intermittently, is the "communication Service" is suspended. This is the main task for the mail of active components and contacts. He works intermittently to query for updates. In the meantime, it hangs. When you look at the splash screen or metro you don't see it, but it is always the case.

  I suspect that the suspended status does not appear when we first open Manager tasks because the Task Manager is not completed update. I can force it to switch by flipping back. but it just will not be suspended for a fraction of a second.

• What is the purpose of the program Interface travel stop?

  At the time confirm ship, an Interface program travel stop gets submitted. What is the purpose of this program?

  Interface travel Stop - stop Interface very essential travel plays in the Oracle order management application.
  This is the simultaneous program triggering interface > Submit Request. Judgment of travel of the interface.
  Or you can also trigger this program competed at the ship to confirm uncheck the? Reporter Interface? checkbox. By default, this check box is clear only.

  Stop of trip interface has 2 parts
  1. He treat data for order management.
  2. it processes data related to inventory. (and we have separated CP for this also? The inventory interface?).

  In the first part, it is the point on the oe_order_lines_all as well as wsh-delivery_details table and once this part correctly executed only then SECOND phase of ITS triggered. If the FIRST part error for some reason then the 2nd part is not raised, and even if you try to send? The inventory Interface?, he's not going to get you data. Reason? It will validate and check if oe_interfaced_flag in the wsh_delivery_details table is there or not. If N or X? Interface of stocks? Let's not get this folder for the treatment.

  I have observed that in most of the time users submit trip interface stop while the ship confirm, but there are significant cases where favorite client to run it as a planned process without specifying delivery # or Trip #, because their volume of orders is very high and they want to run this process for a time of the day.

  Please note that unless this execution process, workflow for the command line is maintained to notified SHIP_LINE and will not progress to complete billing and finally. So while deciding trigger for this program, you will need to make sure that when you want customer invoice.

  A little advice I give here is, never try to stop the execution of this program, unless you have a very valid reason. Any stop its will result in stacking the data in the State of the workflow notified SHIP_LLINE and as soon as you start again after a stop running it will take a deep dive based on your performance.

  Source:
  http://eoracleapps.blogspot.com/2009/11/interface-trip-stop-its-in-order.html

• MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  The following is from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.5-13-mid-2012-unibody-usb3-specs.html

  In addition, the 6 Gb/s it is SATA III

  Standard hard drive:

  500 GB (5400 RPM)

  Int. HD Interface:

  Serial ATA (6 Gb/s)

• What is the purpose of the files the (Inbox, trash, etc.) who are also in the default account?

  What is the purpose of the files the duplicate (Inbox, trash, etc.) who are also in the default account?

  Check here

  • http://KB.mozillazine.org/Local_Folders

• What is the purpose of the "this is awkward window?

  What is the purpose of the "embarrassing window" at startup. Why can not simply open the page in the homepage as in the past? Thank you.

  If you have submitted reports of incidents, so thanks for posting the ID of one or more reports of recent incidents that have a prefix 'bp ':

  • BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

  You can find the ID of the submitted crash reports on the Subject: hangs page.

  • You can open the Subject: hangs page through the address bar, you open a Web site, or open this page through the "help > troubleshooting information.

  See:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter
  • https://support.Mozilla.org/KB/Mozilla+Crash+Reporter

• What is the purpose of the feature 'Love' in music?

  In order to better manage my large collection of music, I decided to use the "beloved".  I began to select the pieces to follow using the feature, but after they are played on my iPhone6 or Nano the designation 'Likes' disappears and I'm left with nothing.  Why is this happening? What is the purpose of this feature?

  It is intended for future fuel recommendations and has nothing to do with the organization or management of a collection. For this you should use playlists or music categories in MY music (Albums, artist, etc.).

• What it the purpose of the Blue Coast "thermometer" I keep seeing in Firefox on mac? Where is the setting for this? I'm looking for a way to get rid of it?

  This embarrassing symbol keeps appearing. I would like to understand its purpose and how to use it or eliminate it. Several times I could eliminate is dragging them slightly to the left but that does not work today.

  This looks like an icon that you get if you drag a tab to move it to a new location. This icon should disappear when the move is completed, but apparently that didn't happen if it remains visible.

• What is the purpose of VTEncoderXPCService and why should I use so much CPU?

  As you can see in the image as an attachment, it consumes about 300% of the power of my CPU:

  

  This causes in turn my MacBook Pro CPU to heat and speed up the rotation of the fan.

  What is the purpose of this process? Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  Thank you.

  Why is it so CPU intensive even if the Photos app is sitting idle in the background?

  As you probably know, the conditioned XPCservices which can access the sandbox of a request and securely communicate with him. When you import new media or migrate a photo library, it will create thumbnails and previews of media in the library.  'S done it by background processes began to take photos. These will be run and is same photo is apparently inactive. After the importation of the new media, it is best to keep the pictures running overnight to get background processing as long as you don't need a mac for other tasks.

  VTEncoderXPCService and VTDeoderXPCService convert your videos. If one of them is hogging all processing power, this may mean that you have a lot of videos in your library requiring a conversion or one of your videos is damaged or uses a codec that cannot be treated by pictures. Have you recently to import new videos or migrate a library with videos?

  If a video cannot be treated, remove it from your photo library.  To find the culprit, try to read your videos into pictures.