What fix for serscan.sys used?

Similar Questions

• FIX for usbhub.sys "NOT DIGITALLY SIGNED"

  Since the last windows update, all on my new HP laptop usb ports are now dysfunctional.  Device Manager shows 'USB hub root' pilot 'usbhub.sys' of microsoft corporation is not digitally signed and therefore does not not (code 52) how microsoft may be able to find the digital signature for its own driver?  Someone knows how to fix this?

  Thanks for your help.  I ended up just using the system to the factory settings restore and reset the onboard computer.  In the end, I had no sound, no usb ports were working, media files would not play and windows update might isn't even check the updates.  System files more and more appeared as "unsigned", including the 2nd driver usb (usbd.sys) who initially does not have his signature.  The system was just explosive.

  It seems obvious to me that something in the directories c:\windows\system32\catroot and/or catroot2 has been altered.  What I read in other forums, it is most likely due to some kind of disturbance during the last update of windows, such as a scan of virus or something, but I really don't know what happened exactly.

  The only remaining problem is now a live windows error when you try to run Halo 2 that existed before that anyway.  What I see also in other forums, there is no solution for this yet, and it's a known problem with Halo 2 and Windows 7.  I'll keep following this see if something surfaces.  Ironically, I was hoping that an update of windows could just include a fix for this.  Has not happened yet, and the last update really did not improve the system. ; P

  It was very disappointing, that I could not restore the system to the point just before the update.  I don't know why it failed, but everything is working now and I did a backup fresh with this default configuration, so at least if it happens again, I should be able to bring it back to that State set up, rather than all the way back to the factory.

  Thanks again.

• Serscan.sys was not found - windows xp on a network with the hp printer wireless

  I am trying to install printer HP6500A more (e710n-z) in home network that has the two cables and wireless PC connected to the router of network

  When installing, I wonder for serscan.sys file for Windows XP * with service pack 3 update

  I can not find my installation discs so looking for download copy

  Did I meet problems by using the version of patch from here?

  The KB Article number: 927436
  Language: English
  Platform: i386
  Location: (http://hotfixv4.microsoft.)

  anyone encountered this? How did you solve this problem?

  Thanks a lot - any help would be appreciated

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/which-hotfix-for-serscansys-do-i-use/ae4455b4-2e92-45b1-9c6f-201cccdecf08

• I have windows fix windows vista ultimate.using happens an error code 0 x 80092003.what what I can do

  my google chrome keeps frezzing up.so I tried windows fix it.this comes up with an error code 0x80092003.each time I try to use fix on any problem why

  Hello

  ·          Who solve what are you trying to use?

  ·          Have you tried to reinstall Google Chrome?

  Step 1: For error code 0 x 80092003, you can see the following Microsoft article. You can use the system update tool and check if this helps solve the problem-

  http://support.Microsoft.com/kb/947821

• I use iWeb for my website (use Go Daddy) but I would like to move to something different and easy even as iWeb (what you see is what you get) any suggestions?

  I use iWeb for my website (use Go Daddy) but I would like to move to something different and easy even as iWeb (what you see is what you get) any suggestions?

  Yes, why not take a look at EverWeb.  It has been designed to be very like iWeb, but with everything you wanted iWeb joined, as a form of contact, drop-down menus etc and much more.

  The layout is very similar to iWeb, and it was deliberately designed to be - have a look here EverWeb.

• How can I fix Firefox 18 and 19 to take too long to close when the custom settings for history is used?

  Hello, please read entire post before responding, thanks!

  I had 12. Firefox (FF) something and he used with happiness when I was getting a new hard drive and start over, I decided to upgrade to the latest FF of the moment, 18.something...

  After going through the implementation of all the different Add - ons etc... and reset the options/preferences (not cool how you reset all those whenever it updates!) The opening time and closing went from 2 to 4 seconds each to 78 seconds to open and 48 seconds to close. In the last two days, I tried (except reset) and read all the suggestions on here does not.

  So I read up on how to uninstall completely any trace of Firefox so I could do a clean install, which did not work, either: the freshly reinstalled 18 FF. ? program still opened and closed at the same time, and had all my info despite my deleting files/sub-sub-sub-records said to hold this info. I disabled everything in FF, still no improvement, so still once I tried to find info on how to completely remove the FF and still nothing it is right for current programs.

  Today I looked again for the info on how to remove completely the FF, found something new to me and tried this, including the complete registry search and remove anything with the name of firefox, then reinstalled FF 18. ?
  Yet all my favorites and info was there, and when I raised my help he auto-mis updated to 19.0 without my permission, even when I don't like other decisions for me for "my good"(d'où le nom d'écran) not OK! ".

  So I tried the reset function to 19.0 FF and it's just that and the opening and closing time lag had gone, back to 2-4 seconds each, which seemed great!, but no.

  When I went back to set up my options and restarted, FF went back to the lag, so I eventually removed/reset everything and all was well again, so I started putting/setting things back one at a time, that's when I found and verified the problem, the history settings!!!
  

  I repeated this 6 times with the same results:
  The value of history to remember, and everything works well, story custom game lag returns without fail.

  My settings in Custom were:

  Accept and remember everything until I close FF
  Clear history the closure of FF.

  In the "Settings" submenu under the closure of FF clear history:
  All 6 boxes are checked for history and no boxes have been checked for data (all default values)

  I watched the process running in the task manager during startup and shutdown FF with these settings, I found that it was not only FF.exe works but also a plugin - container.exe, both eventually stop after about 48 seconds, the plugin container does not appear to run when the story is set on do not forget all the... (I have an incomplete memory on the container of plugin causing problems of this kind in the past, but I can't remember what or exactly when so much...)

  I also tried to leave the setting of history to remember them all and him restarted and tried to erase everything in the menu Tools and FF unresponsive for about 60 seconds and then seemed fine afterwards.

  So, I conclude that there is a problem in the newer versions with the history of compensation in the background while the browser continues to operate, and the likely culprit is the plugin container(again?)...

  So now to the questions...

  Is it possible to set to Custom history and 19.0 FF remain operational during this process and for FF close in a few seconds, as in FF 12. something with the same parameters of the story?
  If yes how can I configure that?

  If no, what is the last version that will work properly with history to remember until FF is closed and then wipe front of re-opening, without waiting for more than a few seconds for everything to happen as it was in my FF12. ? Version?

  Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient.
  

  Thanks for your time...

  (See attached image) That's what worked for me to 19.0 Firefox, and I was able to verify that cookies have been deleted before restart, thanks again for your timely assistance.

• Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Question
  Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Hi Jlhillhouse,

  It is difficult to solve the problems of the computer without knowing all the details. You should look at the link I sent you and especially to Firefox is slow - how to make it faster. I don't know any known issue as you describe, it's probably a very good bet for a response.

• What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions?

  What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions? (Temperature, humidity, etc.)

  Hi jojosalud,

  According to the specifications for the cRIO-9012, the MTBF is 330 481 hours at 25 ° C; Question of Bellcore level II.

  Kind regards

• I'm trying to find what options to license our University has for VDI student use.

  VDA and the use of the student

  Hello

  I'm trying to find what options to license our University has for VDI student use.   With 2000 students we would really here the year 2000 VDA licenses.  Are there other options out there?

  This license information can be found here:
  http://www.Microsoft.com/licensing/software-assurance/Windows-Virtualization.aspx

  It is a peer-to-peer forum. You must contact Microsoft about licensing issues.

• Serscan.sys problem for you to connect to a HP Photosmart Plus printer

  I can't connect my printer HP Photosmart Plus to my laptop via wifi as a pop saying, "the serscan.sys file on Windows xp home edition CD-ROM is needed" how to fix it?

  Insert the Windows XP CD (when asked to) and leave the problem set.

  Also it give it a shot:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

• Fix the size of the MTU for the E4200 using DSL?

  I wanted to check the MTU size manual correct setting for the E4200 using DSL.  An indifferent Linksys Tech told me that the correct MTU size should be manual to 1375. I am running firmware v1.0.01 basically, I have a Mac connected to the E4200 and 2 wireless computers.  I would like to get the best speed of the Internet I can, wire and wireless.  What do you suggest me? Thank you.

  See here

• Is their a fix for the extreme lag by using Telnet on a vista machine?

  Extreme lag with vista telnet, no fix for this issue?

  Hello
   
  • What exactly are you trying to accomplish?
  • What is the error message that you receive?
  • How long you have been facing this problem?
  • What changes were made before the grant took place?
   
  Reply back with more information, helping us to better understand the issue.
   
  See also: http://support.microsoft.com/kb/555375

• ink advantage 4675: missing serscan.sys for installation of the scanner

  I'm trying to get this all in one printer scanner to work with my HP DV6 windows 8.1 x64machine and so far everything I've gotten is grief.
  This was initially the installation cannot find a file to install same (serscan.sys)
  All other posts said I need for an XP operating system file.
  Found one online, downloaded and run Setup to download folder, where he stopped at the second location request to the file where the installer says the file was not signed by microsoft.
  Put the same file in the C:/windows/inf folder and finally installed, but the scanner does not.

  Running the printer HP scanner doctor said there was a problem in the device manage and the unit had to be uninstalled. At this point, the only thing I can figured is the unsigned serscan file which was not duly signed.
  Got a serscan.sys since one machine virtual XP, uninstalled and reinstalled the printer with the new file in the inf folder and now the installer throws an error message...
  return to the downloaded file installed, the device but the printer does not work.

  I think I found the propblem... the serscan.sys downloaded internet and even I got the XP machine.
  Went in Windows/inf and deleted the serscan.sys.

  Then windows/system32 and did a search for the serscan.sys where research has found two files, an old man of about 2014(*i think) in a repository in system32 folder and another who was very new in the folder system32 himself.
  I copied the serscan.sys of the repository and pasted into the windows/inf and the folder windows/system32, a reinstallation of the software of 123.hp.com and everything worked!

• How can I find out what programs has not been used for awhile so I can remove from Control Panel

  Original title: Control Panel

  How can I find out what programs has not been used for awhile so I can remove from Control Panel

  It is removed, it's just in your own knowledge and memory.  If you know that you have not used and don't want that, then you can delete it.  It's entirely your choice

• What IP address will be used for sending a test e-mail in the express IPS Manager?

  Hi all

  I intend to use the IPS Maine e-mail notification feature.

  There is a question confused me. The test Email can work only half the time, again can't.

  I want to know what IP address will be use for this SMTP connection.  Maybe I used an ACL to allow this traffic.

  Does anyone know what the problem is for this?

  My camera is 5585 X with IPS SSP20.

  Hello

  There should be no blocking communication between the host of the EMI and your SMTP server. Check if the communication is fine.

  Kind regards

  Akshay Rouanet