Will not get my Acer iconia 7 b1-730hd past Acer logo when I try to start. Any help, it was beautiful!

Similar Questions

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me, thanks

  I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me thank you all

  Hello

  Please quit Setup and then exit the creative application of cloud.

  After that, restart the machine.

  Let us know if that helps.

  Kind regards

  Bani

• How can I add a footer to the main section that will not get push off-page?

  Generator 10.1.2.2.0
  ORACLE Server Release 10.1.0.5.0
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  
  Hi all
  
  I want to add a footer frame in the main section of a report that will not get pushed off the page by an extensible framework above it, which can develop vertically, but will still allow the extensible framework continue on the next page (and print another foot on this page as well. I paint a blank on how to do it with anchor or frameworks encompassing etc points.

  Extend the extensible framework until the footer frame. Change the elasticity vertical expandable framework to contract or fixed. In this case, pull-out frame will be printed until the foot of the page and will then continue on the next page.

  I hope this helps.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

  I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

  There are a number of options available when you choose to import files to your catalog in Lightroom (library)

  1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

  2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

  3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

  The original image file will be located at the location of your choice.

  There are no image files in your catalog (or library) file the original files are in the location you choose.

  If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

• I bought LR6 upgrade of LR3.6 that my new camera is not compatible. I could download LR6 on my PC but when I try to install I get error messageeven after many unistalls and reinstalls: setup initialization failed. This may be due to a m

  I bought LR6 upgrade of LR3.6 that my new camera is not compatible. "I could download LR6 on my PC but when I try to install I get the error even after many unistalls and reinstalls:" setup initialization failed. This may be due to a missing file. Download Adobe Support Advisor to detect the problem". Of course, that no longer exists. Help, please... Thank you

  Hi Lilianh71023988,

  'Could not initialize installation' could indicate a corrupted download. If you haven't done so already, try the following steps:

  1. Uninstall Lightroom 6: How to manually uninstall the Lightroom
  2. Use the Adobe Cleaner tool to remove the remains of program use the Adobe Creative Cloud cleaning tool to solve installation problems
  3. Download a new copy of Lightroom 6 to install Photoshop Lightroom
  4. Try reinstalling the program.

  If, after re-downloaded, you keep getting the same error, I recommend you to review the installation log files to identify the specific error: Troubleshooting Adobe Creative Suite install problems with log files.

  Let us know if you need help.

  Best,

  Del

• When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC. If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC.

  If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  I webxite who has problems, and I get to him because I can't start Dreamweaver.

  Help! Help!

  If you bought it, you have the version under license.  You have not forever.

  Creative products of cloud is not the serial numbers.  You enable product Cloud by logging in with your Adobe ID and password.

  Nancy O.

• I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?

  I am running windows 8.1 and lightroom 5.7. AutoPlay will not work... period even though my settings in Control Panel. Try DVD and opens in Lightroom only! Any thoughts?

  OK I tried. No configuration work at all. And it is a purchased the LR in a group, set current online copy! I am at a loss. While I love the edition is a computer after all and I think I'll have a bit of scrap Lr if I can't solve this problem.

• How can I get my printer spooler running I get error 1075 when I try to start it

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you see something like this:

  Cannot start service on Local computer print spooler.
  Error 1075: The dependency service does not exist or has been marked for deletion.

  Error 1075 means "ERROR_SERVICE_DEPENDENCY_DELETED".

  This means that there is some Service think that it depends on to start the Print Spooler Service that is missing.  It's maybe the printing or drivers that have been uninstalled software.

  If really, the dependency service exists and simply not work (dependence, Services must be started and running), you will get an error like this:

  Cannot start service on Local computer print spooler.
  Error 1068: The dependency service or group could start.

  You now or you already had all of the installed Lexmark printers?

  If the Service print spooler used to work well, do you have added or removed all printers since he worked?

  To view your Services, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Highlight the Print Spooler Service, right-click and choose properties you can see what is happening.  You will be especially interested in the startup (generally set to automatic) type and the items listed in the Dependencies tab.

  Always print spooler Service usually depends on the remote procedure call (RPC) Service is running, so if the remote procedure call (RPC) Service is not running, find it in your Services, launch it and set the startup type to automatic.

  If the remote procedure call (RPC) Service is not listed as a dependency for the Print Spooler Service, you can add it.

  You must see what Services depends on your Print Spooler Service, and then restart them (and their startup type automatic value), or if you have the dependency Services listed for items that are more installed on your system, you must inform the print spooler that she needs more of them to start.  Registered Addiction Services that are no longer needed must be removed.

  For example, I said to my Print Spooler Service depends on the remote procedure call (RPC) Service, and also depends on the Service Jose (and of course there is no Jose service).

  When I try to start my Print Spooler Service, I get an error 1075.  It's logical.

  If I look at the Print Spooler Service properties Dependencies tab in the applet Services however, it does not list the Jose Service as a dependency, but if I query the Print Spooler Service broken from a command prompt, I can see what ir really depends on to start and it looks like this:

  [SC] GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                               : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  Jose
  SERVICE_START_NAME: LocalSystem
         
  I need to delete the Service jose as a dependency for the Print Spooler Service (and leave just the rpcss Service), then the Print Spooler Service will start.

  If you don't see the problem in the Print Spooler service dependencies tab, see what are actually of a command prompt window Print Spooler Service dependencies.  To do this, click on start run and in the type box:

  cmd

  Click OK to open a command prompt window.

  In the command prompt window, query the spooler to print (spooler) Service by entering the following command:

  sc qc spooler

  Whatever it is listed under needs of DEPENDENCIES is running before starting the print spooler.

  If there are DEPENDENCIES listed for things that are more installed, you can fix it, but first of all, we need to know what is indicated, then we can remove the ones that are not needed.

  If you make adjustments, do not forget to restart your system and make sure that changes "stick".

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• When I try to start the time service Windows, I get a message:

  When I try to start the time service Windows, I get a message:

  ------------------------------------------------------------------------------------------------------------

  Windows could not start the time Service Windows on the Local computer.

  Error 2: The system cannot find the specified file

  any idea please?

  The question is similar but not identical.
  You can have a look. See if the answer in this thread will help:
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6bbea43f-5575-4E78-9b52-ac766632bfc2

  Answered by: Martin - Support Engineer
  Date: June 20, 2009. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'

  Original title: login as administrator WARNING

  When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'. It never happened to me before, and I can't launch the Simulator. I tried to create a different user account has administrator rights, and then reinstalling the Simulator in this account. It did not work. I don't know how to remove the windows updates and I can't return to my windows to a previous state. Flight Simulator start in "Safe Mode" is no help either. Can anyone give me any help would be greatly appreciated. Thank you in advance.

  Wonders will never cease! I also, lived the same issues with FS2004 and CFS3 which began some time in the past months. Located at KB3086255 was updated and deleted and everything seems to work again.

• When I try to start my LR3, I get an error screen

  When I try to start my LR3, I get a screen with "Lightroom has encountered an error during the Conference since the cache of the ' perceived and has to leave." Lightroom today to solve the problem at the next launch. So I close LR3 and re - start, but things happen and I get the same message... What can I do?

  With the help of Windows Explorer or the Mac Finder, go to the folder that contains your catalog file. There will be a subfolder whose name ends with Previews.LRDATA. Delete this subfolder. Do not remove anything else.

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.