What happened to my follow-up check?

just updated CS4...

track and update basic controls eliminated in the top control bar?

I know that you can get at home, in the menu charater, but is it possible to get them upstairs?  I used which CONSTANTLY and now his party no reason apparent.  There are a lot of empty space up there, I do not understand why these controls are missing.

Thank you!

Somehow the default settings for this changed between CS3 and CS4.

No reason to panic: the right end of the command bar, look for the triangle of the tiny tiny drop. The lowest is to 'Customize... '. ». Given a large enough screen, you can switch on everything.

Tags: InDesign

Similar Questions

  • Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

    If a shortcut is used while Firefox is already open the error will not occur.

    For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

    Hope this helps.

    Olivier

  • What happened to my addon pluggin checker (updated to the 50.0.1) and his party

    If I go to my addons there is no way to verify the pluggins for updates. It shows just the pluggins

    Hello!
    Now, you can check your plugins here:
    https://www.Mozilla.org/en-us/pluginCheck/

  • good night, is that what happens when you open cloud creative design I check your email and get the following email (< deleted by the moderator >) and let my id or enter gives me more options

    good night, is that what happens when you open cloud creative design I check your email and get the following email (< deleted by the moderator >) and let my id or enter gives me more options

    Hello

    Follow please: address error to connect to Creative Cloud Desktop, Email how to pass my e-mail? and CC has a fake email, can not change

    Kind regards

    Sheena

  • What happens if the PC I just downloaded Itunes on &amp; connected to, does it display not all devices?

    What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

    Hello 2sealadies!

    Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

    If you are using a Windows PC

    1. Open Device Manager by following the steps for the version of Windows that you have:
      • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
      • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
      • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
    2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

    The pilot and
    No symbols

    A down arrow
    by the driver

    Exclamation or
    question mark by
    the pilot

    No Apple Mobile
    USB device driver

    You don't see symbols next to the Apple Mobile Device USB Driver

    If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

    You see an arrow down

    If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

    You see an exclamation point or question mark

    If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

    You do not see the Apple Mobile Device USB Driver

    1. Disconnect your device from your computer.
    2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
    3. Reconnect your device to your computer.
    4. If you see one of these sections in the Device Manager, expand them:
      • Imaging devices
      • Other devices
      • Portable devices
      • USB Bus controllers

    Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

    If a single unknown device appears, follow these steps:

    1. Right click on the unknown device entry.
    2. Choose Properties from the context menu, and then click the Details tab.
    3. In the drop-down menu, select hardware IDS.
    4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
    5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
    6. Unplug the unit and remove all the USB devices on the computer.
    7. Shut down the computer, and then turn it back on.
    8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
    9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

    If you still need help, contact Apple technical support.

    Manually update the Apple Mobile Device USB driver

    If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

    1. Choose update driver software.
    2. Choose "Browse my computer for driver software."
    3. Choose "Let Me pick from a list of drivers for devices on my computer.

  • Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
  • Click Next. You should see the disk button.
  • Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
  • Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
  • In the disc window, click Open, and then click Next and then click Finish.
  • Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
  • Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.
  • See you soon!

  • What happened to my hotmail page? I want to again as if it were before it ruin!

    I lost my contacts and controls at the top!

    Hello

    I understand that you need to know what happened to your contacts in Hotmail after upgrade to Outlook.com.

    I suggest to refer to the following article and check if it helps.

    My Hotmail account has been upgraded to Outlook.com


    http://Windows.Microsoft.com/en-us/Windows/Outlook/auto-upgrade-Outlook-FAQ

    If the problem persists, I suggest you send the request in Outlook forums for assistance.

    http://answers.Microsoft.com/en-us/windowslive/Forum/mail

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

  • What happens exactly when I install Windows XP Service Pack 3? If I don't create backups for all the stuff I have on my computer, that all get deleted or something?

    The thing about automatic updates told me that I should install Windows XP SP3, because the one I have is no longer supported? I went to see what I have to do before installing it, and it says that I need to create backups... and I kinda don't know even what exactly is the SP 3 and what happens when I install it? Same thing with Windows Media Format 11 SDK. The explanation I got from Microsoft Support were a little confusing for me, if someone could please give me simple explanations? Thank you!

    Hi Petra "Jimmy."

    You try to install Windows Media Format 11 SDK?

    You can follow these links before you install SP3 on your computer.

    Steps to take before you install Windows XP Service Pack 3

    Learn how to install Windows XP Service Pack 3

    For more information about Windows Media Format 11 SDK, you can check this link.

    Windows Media Format 11 SDK

    If you try to install it, you can manually download and install Windows Media Format 11 SDK from this link.

    Update for Windows Media Format 11 SDK for Windows XP x 64 Edition (KB929399)

    Hope the helps of information.

    Please post back and we do know.

  • I can't rename my files photo and document from one month. What happened and how can I solve this problem?

    I can't rename my files photo and document from one month. What happened and how can I solve this problem?

    Hi robertjefferies,

    You get the error message?

    Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
    Diagnose and repair Windows files and folders problems automatically

    Method 2: Start the computer in safe mode, and then check. To do this, follow the steps below:

    Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Let me know if the problem persists in this mode

  • What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

    What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

    cwalker,

    If it does not, it may be time for the list:

    Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

    The following is a general list of things, try when

    (A) the question is not in a specific file,

    (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

    (C) It is not caused by problems with opening a file from external media (see below).

    You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

    If possible / there is, you must record a current work first, of course.

    (1) close Illy and open again.

    (2) restart the computer (you can make up at least 5 times);

    (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

    4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

    https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

    5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

    Even worse, you can:

    6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

    http://www.Adobe.com/support/contact/cscleanertool.html

  • Go from Stand Alome of subscription - what happens?

    I am currently using a version of the stand-alone Lightroom 5 on my computer. If I change to the subscription of Photoshop Lightroom what happens to all my photos and adjustments? All original photos remain on my computer? A copy of the Lightroom and Photohop program is downloaded on my computer? What is stored on the web?

    Normally, everything that is on your computer remains on your computer.  The new software is installed on your computer.  At a minimum, you need the internet for the following installation is for updates of your installed software and for system Adobe periodically validate your subscription - you need not a continuous internet connection.

    If you need information on how your Lightroom related files could be managed in the passage of the version that you should check with the experts of Lightroom in this forum.  Photoshop Lightroom

  • SkinnablePopUpContainer: What happens when close() is called

    Hello

    When I call close on a SkinnablePopUpContainer, what happens to events for her listeners the variable that contains the reference, the properties defined in it and so on?

    For example, in my app to check if there is a screen I do the following:

    Instantiate

    Popup = new mySkinnablePopUpContainer();

    popup.addEventListener (PopUpEvent.CLOSE, popupClsoe);

    ...

    private void popupClose(event:PopUpEvent):void

    {

    Popup = null;

    }

    And basically, I check if the popup is null. Is there another way to do this?

    Thank you.

    Remove you the earphones and jut certainly reduce to zero any reference you can think. The chances of the object is garbage collected.

    C

  • What happens with browsers?

    I have a strange anomaly. I redo a web site and having as a subdirectory of my site until it's over.

    Could you please visit the following pages:
    [1]. http://www.bowzerbird.com/sorop/win_programs.html
    [the problem with this page, is that on some monitors, there is a big empty space at the bottom of the page: this "view" is NOT the same on each monitor (computers).] I checked the code and have no problem, I do not see the empty space. Can someone help me solve this problem?

    [2]. http://www.bowzerbird.com/sorop/members.html
    The problem on this page is in the left navigation bar, the 6th academic watch SupportFinancial element and is NOT a pause between the words 'Support' and 'Financial'. The links are as follows:
    Teaching support
    Financial support

    In addition, these anomalies are not compatible with the rest of the web site that I design.
    Please help, I'm out with that!

    I noticed in the "strange" things of last year going on with browsers (Firefox and IE) and I never seemed to have as many problems in the past that I have lately.
    Using Dreamweaver MX 2004 has something to do with it? Don't have the $$$ to upgrade at this time.

    Ellen

    Friday, January 25, 2008 03:25:51 + 0000 (UTC), "Bowzetto".
    wrote:

    > Win,.
    >
    > I found the problem. As I said, I created a new navigation bar [just typed each
    > line, created links to them, put each on their individual lines and
    > should not add a tag to the column. And aunt, each page displays
    > properly.
    >
    > Here is the link:
    > http://www.bowzerbird.com/sorop/members.html
    >
    > Try it in Firefox and IE and you will see that which left the navigation bar displays
    > correctly with every link on its own line. Browse the site and you will see
    > each page [NavBar] aligns properly.
    >
    > This is an interesting "dilemma." What happens if someone resizes the page? Everything I do
    > the time and page/graphics still resize proportionately. So yes,.
    > what do you do? Laughing out loud
    >
    > But, once again, thank you very much for the correction on the height tag.
    > Once again, thank you.
    >
    > Ellen

    Yep, good grip - links now all one
    tag between them,
    forcing everyone to a new line.

    And the nowrap on td maintains the text on a line independent of the
    How can someone resize.

    Good for you to work in!

    Win
    --
    Day of Win, Wild Rose websites
    http://www.wildrosewebsites.com
    [email protected]
    Skype winifredday

  • What happened to Sierra Mac Mini mid-2010?

    What happened to Sierra Mac Mini mid-2010?  As a first step, I realized it was the lower end of the system requirements.  Many citations on the support pages and anywhere on the web say "Mac Mini mid-2010 or newer."  But now, after half a day struggling with the installation, I find that he must now be "mid-2011 or newer!  Changed Whaaaa?

    "Never promise what you can't deliver."

    Mac mini (mid-2010), 2.4 GHz Intel Core 2 Duo, 8 GB of memory, running OS X El Capitan 10.11.6

    Hello

    It is said...

    • Mac mini (mid-2010 or more recent)

    See Configuration hardware Mac here > http://www.apple.com/macos/how-to-upgrade/#hardware-requirements

    You may be looking for feature requirements:

    Instant Rebate Hotspot and universal Clipboard

    Supported by the following Mac models:

    • MacBook (early 2015 or newer)
    • MacBook Pro (2012 or newer)
    • MacBook Air (2012 or newer)
    • Mac mini (2012 or newer)
    • iMac (2012 or newer)
    • Mac Pro (end 2013)
  • What happened at the sight of split with iOS 10 on iPad? Before the download, I could open next to safari pages or other apps.

    What happened at the sight of split with iOS 10 on iPad? Before the download, I could open next to safari pages or other apps.

    Still, it works as before, or if.  Check your multitasking general, settings and make sure that it not turns off somehow.

  • What happened to the insertion function. It was on the same line as file

    What happened to the insertion function? It was on the same line as the files, tools, etc. He's gone. If you want to insert a jpg you sent as an attachment. I have read through the help files and that you can't find the answer. I want my old Thunderbird back! Newer is not always better.

    I suspect that you have lost the Mail composition toolbar. Open an entry window, press and hold the < alt > key, type v and check the box for the mail toolbar. I would also allow the Menu bar while you are there.

    Another possibility, if the Insert option is missing in the mail toolbar, is that it is spent in composition in plain text mode. Open the settings page of the account assigned by right-clicking on the account in the left pane, select Composition & addressing and tick the box labelled "Dial using the HTML format".

Maybe you are looking for

  • TrueNotes download EP AT10 has

    The previous fast thread locked moderator.The link provided has nothing to do with the TruNote application that comes witht eh AT10PE-A tablet (Excite write). In fact, I'd be very interested to know if Toshiba intend to upgrade this great app?Thank y

  • DISM 14081 NET3.5 on Server R2 2012 installation error

    Spent several days trying to install NETFX3 on Windows Essential Server 2012 R2, but it holds 32.7% with the error 14081 failed.  First I tried through the features to add, but it doesn't have a lot of time.   Then I mounted the ISO as drive e: serve

  • EMule is blocked, how to fix?

    Network wireless adapter NIC Ethernet network deviceI HAVE A PROBLEM WTH EMULE, WHICH IS BLOCKED HOW TO FIX THE PROBLEM?ELIEL SCHÄFLER

  • I can not start the Windows Firewall service in Windows XP SP3

    I discovered this problem when I installed a new Brother MFC-7860 DW in my network. Although the computer can 'see' the machine, I can't print to it. The error coming from the troubleshooter has informed me that the firewall might be the problem. Now

  • Imageres.dll has been changed. I need a default icons on Vista.

    One of the vista themes I tried changed my imageres.dll, to the extent where I found not by default Vista Aero icons. The theme has been scanned for all adware, spyware, viruses and malware. I don't have a restore point on my computer, and I don't wa