What I need to create and publish a magazine for iOS and Android?

Similar Questions

• Need to create and add RDM disk while calling reconfigVM

  Hello

  Now I create RDM disk help createdisk method and then added the disk of the virtual machine by using the reconfigvm method using vsphere sdk in c# but I need to create and add the disk while calling the reconfigVM only. I searched and found a code as example.

  diskSpec.operation = VirtualDeviceConfigSpecOperation.add;
  diskSpec.fileOperation = VirtualDeviceConfigSpecFileOperation.create;

  ". According to my understanding, vmdk file can create while adding the LUNs as disk RDM using both add and create function, but then I try these i couldn't succeed. If anyone has tried what can you share your code or suggestions please.

  Thank you

  Vijaya

  Vijaya,

  I guess that how you specify the devicename property is invalid. You just need to assign the devicename you recovered in QueryConfigTarget to the devicename of the backup file.  Please refer below snippet for adding disk:

  Request for more information on specific devices that can be used to back up virtual devices

  CTAR ConfigTarget = cb.getConnection () .getService () .queryConfigTarget (envBrow, hostmor);

  VirtualMachineScsiDiskDeviceInfo [] arrSCSILun = (VirtualMachineScsiDiskDeviceInfo []) ctar.getScsiDisk ();

  HostScsiDisk drive;

  If (arrSCSILun! = null) {}

  for (int i = 0; i)< arrscsilun.length;="" i++)="">

  disc = arrSCSILun [i] .getDisk ();

  If (disk == null) {}

  continue;

  }

  else {}

  deviceName = arrSCSILun [i] .getDisk () .getCanonicalName ();

  }

  Add a disk
  VirtualDeviceConfigSpec diskSpec = new VirtualDeviceConfigSpec();
       
  diskSpec.setFileOperation (VirtualDeviceConfigSpecFileOperation.create);
  diskSpec.setOperation (VirtualDeviceConfigSpecOperation.add);
       
  VirtualDisk disk = new VirtualDisk();
  VirtualDiskRawDiskMappingVer1BackingInfo diskfileBacking = new VirtualDiskRawDiskMappingVer1BackingInfo();
       
  diskfileBacking.setFileName("");
  diskfileBacking.setDiskMode ("persist");
  diskfileBacking.setCompatibilityMode ("physicalMode");
     diskfileBacking.setDeviceName (deviceName); It's the devicename you got above
  System.out.println ("DeviceName assigned is" + deviceName);
  disk.setKey (new Integer(-101));
  disk.setControllerKey (new Integer (diskCtlrKey));
  disk.setUnitNumber (new Integer (0));
  disk.setBacking (diskfileBacking);
  disk.setCapacityInKB (1024);
       
  diskSpec.setDevice (disk);

  And to set the loglevel, please visit: http://kb.vmware.com/kb/1001457

• Can I install a new edition of retail XP on an existing OEM edition or what I need to reformat and start all over again?

  Original title: Windows XP

  Can I install a new edition of retail XP on an existing OEM edition or what I need to reformat and start all over again?

  Hi billavery,

  1. which type of installation do you want?
  2. is it repair install or clean install?

  Yes, you can install the retail version of XP on an existing OEM edition.
  See perform a repair Installation
  See How to install or upgrade to Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I put in a new windows xp en my cable internet is not werking why is that what I need to down load drivers from dell for this

  I put in a new windows xp en my cable internet is not werking why is that what I need to down load drivers from dell for this

  Your Internet drivers are not part of XP. If you bought the device from Dell, you have other records besides that reinstall drive? I had 3 machines from Dell and they all came with the CD of drivers among others.

• Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Help, please.

  Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Please help., Hello, I want to DPS magazin for IOS and Android with a lot of text notes. There are about 200 notes per article. The idea is to make windows pop-up as EPUB 3.0. Help, please.

  Remember that only you can create an iPad app using your simple editing solution (which is included in your subscription CC). So you need a Pro or business of DPS version to be able to create a Android version.

  You can create pop-ups in InDesign using slide show options and a multi-state object. But it's all manual work, then you're going to spend a lot of time on this point, also depending on the layout of your design.

• Hello. I started with the DPS. Is it possible to publish a magazine for a limited specific target group? For example, in a Department of a large company? Or for the heads of the different services? If so, how should I do? Thank you for your help.

  Hello.

  I started with the DPS. Is it possible to publish a magazine for a limited specific target group? For example, in a Department of a large company?

  Or for the heads of the different services? If so, how should I do? Thank you for your help.

  The short answer is Yes.

  Click on the request of consultation in link Digital Publishing Suite help | DPS pricing options to receive a quote for your project of the DPS license.

• I need to create and download a calendar to creative cloud

  I need create and download a calendar that I can use on creative cloud. I'd appreciate any help, thank you

  I don't know what kind of feature, you need with the calendar, or what product you wanted to create in it.

  This might help?

  http://www.Adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&EXTID=1046667

• Can someone help what API allows to create and update resources

  Hello
  
  I need the API to create and update the details of the resource.
  I want to update roles, groups etc claims those are the tab in the form of resources.
  FMB is called JTFRSDEF.
  
  Kind regards
  Javed Khan

  Use JTF_RS_GROUP_MEMBERS_PUB.update_resource_group_members and JTF_RS_ROLE_RELATE_PUB.update_resource_role_relate.

  Thank you
  Shree

• My DPS can I publish my magazine for other platforms tablets then. As a web browser?

  With the InDesign Digital Publishing Suite, you can export your document/interactive magazine for iPad, Android and Blackberry. But you can view this interactive content even on a laptop or PC (as in a browser) or you must have a Tablet?

  Yes, by selecting the web viewer feature in your account of the application.

• What ports needed to catalog and the business of Recovery Manager

  I have a server I have the Enterprise Manager configuration and recovery catalog on.  I have another server I want to manage.  The part of business manager seems to work very well, I was able to start the agent on this server and promote it.  But when I create the backup job and then try and tell him to use the catalogue of recovery I get a tns error, I think it's really a problem with my firewall.  I'm trying to find out what ports I need to open for the catalog recovery and Enterprise Manager to work.  That's what I have now.

  Ctlg Rec / EM Svr - all ports open-> Svr2

  Ctlg Rec / EM Svr < - just the port 4899 - Svr2

  4899 is the agent of the EM.

  Can I also open Svr2 1521 port to my Rec Ctlg / Server EM?  Or all other ports?

  2 server needs to connect to the catalogue of recovery via the TCP port that you define in the earpiece of your recovery catalog server.

• What else needs my Mac, and how to configure it?

  Just installed Premiere CS4 on my Mac - 2.66 GHz Intel Core 2 Duo, with memory of 4 GB 1067 MHz DDR3 and 1 TB hard drive. I want to edit files on a JVC GY-HM100 camcorder.

  The addition of USB 2.0 external hard drives help me to handle HD video? How should be arranged and accessed by the process and creating files? Is it a good idea to add more RAM, say to another 4 GB?

  Sorry if this is a bit Basic. It is very new, but exciting!

  Disk Boot OS & programs, including the queue page (or what we call in terms of MAC), the media on the FW800 and now it becomes difficult. Do you keep your project on the boot floppy or the FW800? I suppose that the startup disk is better from a speed standpoint, but then you will need to use the FW drive for your files to preview/zero as well. I would like to use the USB for backups and exports only. But check that if export has completed successfully on the USB key before you delete a project finished, USB can be tricky.

• Need to create and adjustment layer to compensate for the unwanted hue caused by lens

  I'm looking for help to set up an adjustment layer to compensate for a specific lens coloring problem. Basically, I use a GoPro (on a drone) but I got a flat lens of spare parts. The sharpness is good, but the lens has a well-known problem: it translates into a pink coloring around the edges/corners. Most of the time it is barely perceptible, sometimes he jumps. It also depends on the screen, that I use for example. My TV seems to bring out a lot more than my laptop.

  Here's an example - look at around 0:35 0:40 http://vimeo.com/117790732

  And to try to get an idea where the question is on the frame, I took a picture of the example of the grass Frost, very early in the morning. I then crank up the saturation to 100% and this is what it looks like:

  

  I would like to be able to compensate for this. This should probably do with an adjustment in Photoshop layer that I can then import in Premier Pro. Can anyone advise as to how to do?

  Any help will be appreciated.

  Thank you

  Jacques

  

  Since any change in RGB channels influence the tonal scale, perhaps to the laboratory, with m/g-b/y juxtaposition and distinct tone level would be a logical choice. Here, a few sweeping curves (and a rough mask, sorry about that) need to be addressed.

  

  The adjustment layer that results can be changed in the opacity according to the saturation of the chromatic aberration.

  EDIT: Posted quickly. End of shadow of channel tweak L. red dot needs a white dot in the mask to eliminate].

• Need help creating automatic setup of WiFi for XP Win 7, etc... Get errors on XP

  I have 100s of Win 7 and Win XP computers and I need a way to automatically configure WiFi. Some will be made for students and others for personnel etc. I did hours of research on this mega and using a Win 7 PC to create export to a USB key that is susposed to work on all versions of XP upwards. But, of course, it isn't. This works for Windows 7 and Vista, but not for XP.

  Here's what I did...

  1 a tried using the XP "Wireless Network Setup Wizard" to my XP PC. But it is defective and not allow you to create an installation WITHOUT any encryption, of course it is not acceptable as our WiFi does not use it. We use a system of Access Point Aruba which forces authentication VIA AD/connection on the first attempt to navigate the web. No encryption AT ALL as much as the WiFi client installation is concerned. I also did a profile exactly as I want only it except that I put in bogus WEP settings so it creates the SMRTNTKY with the WSETTING file. WFC file in it and then edited the. WFC to remove file but then it wouldn't work which is NOT ACCEPTABLE.

  2 went to a Win 7 PC as it does from there is supposed to work on Vista and XP too and had no problem using the option 'Copy this network on a USB flash drive profile' and it works perfectly for Win 7 and Vista, but - error on XP with the following message...

  The wizard found no information needed to set up a network, or the information was not usable. Try to rerun the wizard to your original computer.

  After reviewing the files generated between the XP method to export a WiFi profile to a USB key and how to Win 7 well, I found the following differences, all related to security settings. Of course, it's a bug or a design defect and a BIG problem for the IT Pro.

  Here's what my two WSETTING. Resemble WFC files.

  For XP I have:

  
  
     
          011C0F3E-EB0F-46B8-BA95-267ADEA25EC3
          0B4E59B8-8317-46B2-B8C2-C46850162E6C
          The Microsoft Wireless Network Configuration Wizard
     
      Student
      ESS
      0
      0
     
          Open
          WEP
          12345
          0
          0
     
  

  For Win 7 I have:

  
  
     
          01BC3658-4F27-42D1-92F7-3F7CF581A75E
          0B4E59B8-8317-46B2-B8C2-C46850162E6C
          The Microsoft Wireless Network Configuration Wizard
     
      Student
      ESS
      0
      0
     
          Open
          None
         
          0
          0
     
  

  There seems to be ONLY two lines which differ between the two files and are as follows...

  For XP:

  WEP
          12345

  For Win 7:

  None
         

  As you can see that the difference is in the security settings that I don't use. (This is a choice made by the powers above me and I have to work with that. MS should keep in mind at ANY moment the IT pro should have the last say on optional parameters is NOT MS)

  It seems that Microsoft, when they created this tool never intended be used by computer professionals as they force the settings for the IT Pro to decide at ANY TIME, not Ms.  IE to use WEP/WPA etc, or NONE.

  So am I missing something? How do I create an automated way I can run thousands of times without error on XP, Vista or Win 7 to configure profiles WiFi which will have NO apparent safety, but who actually do?

  I would VIA reg setting if I knew where to find all the reg settings to do, but the hours of Googleing gave this info. Everything seems to point to the network VIA USB method profile, which would be perfect if it worked on XP. If there was a simple file I could copy from a master system of its many clones then it works. I could wrap it in one. BAT file or use INNO Script to create a file of configuration etc. Many ways I could do if I could find any files, settings, etc., I would need control.

  It shouldn't be rocket science. I've seen where Microsoft has said they recognize the need for professionals like me to be able to automate this process for any tech user, but then the tools thay do aren't for the professionals that they take away the option of PROFESSIONAL (on-site tech who knows the most, is NOT MS) to decide, using their knowledge intament businesses must make choices about the use or non-use of WEP etc (it's a theme common in MS assistants, just look at the hack job SYSPrep is based by default on the local Administrator profile profile, a MAJOR mistake and a security risk, rendering it useless in a corporate environment where the local Admin profile is preconfigured with options parameters, links, etc. to the things a pro IT does not that the general user to see or to do but they need on the local admin ONLY)

  Thanks for any help you can give.

  Ralph Malph

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads?sort=firstpostdesc

• Need to create a superior version number for app store

  Hello

  I have an update for an application that has been published with the individual license. Now, I need to download an app with a version number higher DPS 1.1 for the Apple app store to accept the download.

  Problem: I can not find anywhere to set the version number of app.

  (I mean not the adobe number 27/26, but that version which is in iTunes Connect)

  When I click on 'create the app' and updates in the Manager it generates a new application with a higher number in the following order: 1.0.0 1.0.1 1.0.2 1.0.3

  But I need to set manually. Where can I do this?

  Thank you

  Mikkel

  Yes, you must contact the DPS Support for this.

• Need help updating my kiosk multi-folio for iOS app

  I have trouble to iOS . After waiting a ridiculous 8 days for a review of my app update was rejected. With such a long time to wait, I really need to know that my next presentation will be OK.

  If anyone knows if there are step by step details how configure a viewer application to update iOS with iTunes subscriptions? It is a business account.

  My application is an application of newsstand that offers only free folios.

  It seems that there is a mixup of details with my In App Purchase. Here is the statement of rejection:

  2.2

  We found that your application exposes one or more bugs, when reviewed on iPad iOS 7.1.2 running on a Wi - Fi network, which is not in conformity with the App Store Review Guidelines .

  When we signed up for the free membership, the transaction has not completed. The activity indicator turns constantly. We have attached a screenshot for your reference.

  (I guess it was down to the mixup with the IPA)
  

  3.3

  We also found the metadata of your presented In - App purchases, such as the name, description or screenshots, is not exactly your In - App purchases.

  Specifically, we noted:

  the name of the free subscription is 'Number 1'. It's invalid, but also confusing, when the user tries to subscribe from the 2nd edition.

  Please review the metadata of your purchases In - App submitted specific and unique to each product In - App Purchase.

  
  

  Thanks in advance for any help you can offer.

  Hello

  I'll leave article 3.3 for a more precise description should simply help...

  For what is 2.2, have you tested the developer version (ipa file) on your device? If so did you buy subscription using a test iTunes Connect user?

  If they feel the issue, there is a good chance for you to experience as well.

  This rotation indicator generally point to an incorrect subscription referenced in your viewer product ID (i.e.: the Apple, as opposed to the product ID for the subscription ID)