What is a LoadSTRINGW and a hccutils. DLL?

Similar Questions

• Windows\System32\LogiLDA.dll what is this file and I need this file? The message says it can't find the module.

  What is this file and I need this file? The message says it can't find the module.

  Hello

  You have recently uninstalled software Logitech?

  Follow the steps in the solution here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/specified-module-could-not-be-found-logildadll/9c227c15-D0D6-4e24-946f-ac0dbbbb10d1

• Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  We are the WEC2013 portage for a controller ARM. The operating system works very well.
  We have made our development using SYSGEN_FSREGRAM and SYSGEN_FSRAMROM.
  We are now developing driver SD card. We have helped in SYSGEN_SD_MEMORY, SYSGEN_SDBUS, SYSGEN_SDHC_STANDARD, and FAT in the catalog items for SD card.

  We did our sdhc.dll to our platform.

  We get the following error,

  PID:00400002 TID:004 B 0006 + SHC_IOControl (0xa5838f80, 0x00071c24, 0 x 00000000, 0, 0xac67fc70, 16, 0xac67f928)
  PID:00400002 TID:004 B 0006-SHC_IOControl(rc = 0)
  PID:00400002 TID:004 B 0006 FSDMGR! MountStore: Failed to open store "SHC1;: error = 31

  Can we do something else?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• What is error code--c:\windows\ipajahoz.dll

  I have a Dell with windows xp. What is error code--c:\WINDOWS\ipajahoz.dll?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• What is LMS.exe and UNS.exe? My computer is infected?

  I found a couple of processes running on my computer Norton Internet Security has NOT detected as a threat, but I became very suspicious of. The first is LMS.exe, FileSize 262 144 bytes, located in "C:\Program Files (x 86) \Intel\Intel (R) engine management Windows\"another file is located in this directory 'NTService_license.txt'. "

  LMS service is defined as "Intel (r) Management and Security Management Service Local Application.

  I have no idea what this program was to my computer! I became suspicious when I noticed the LMS.exe process has been using 30% of my CPU at all times, and continued to increase its use of memory. It is reloaded when the process was killed. I was able to prevent what is happening with the administration tools in my control panel. I've now disabled this service.

  The other process has been listed as 'dependent' on LMS.exe, it is called UNS.exe, FileSize 2 314 240 bytes, located in "C:\Program Files (x 86) \Intel\Intel (R) engine management Components\UNS\. Several other files in this directory, they are: "DTMessageLib.dll, gSOAP_license.txt, IntelAMTUNS.config, OpenSSL_LICENSE.txt, readme.txt, StatusStrings.dll, xerces_LICENSE.txt, and xerces - c_2_7.dll.

  UNS.exe is defined as "Intel (r) Management and security user Notification Service Application.

  All files of text APPEAR official and containing the establishment against any damage to your computer.

  Any help would be appreciated, thanks.

  Please, look at the LMS. EXE http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/beb79a3d-a850-4559-93b3-3c87cb5bb74f . itconcerned

• What happened between Firefox and Roboform? FF no longer mentions RF in its modules!

  What happened between Firefox and Roboform? FF no longer mentions RF in one of its modules.

  I'm having the same problem. RoboForm contacted and they act like they have no idea there is a problem.

• my firefox browser does not load at all no matter what page but explore and google chrome. How to repair?

  my firefox browser does not load at all no matter what page but explore and google chrome. How to repair?

  Hello, these questions can also be caused by security/firewall software which does not correctly and therefore blocks updated versions of firefox: solve connection problems to websites after Firefox update

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• on the left are 3 red balls, yello, green, who go around in a circle. When I click it it says download assistance, what is it for and how can I learn more about them?

  to the left of the URL are 3 balls, red, yellow, green, who go around in a circle. When I click it it says download assistance, what is it for and how can I learn more about them?

  An add-on (extension) for download videos from Youtube-like on your hard drive

  • See-> https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/
  • See-> http://www.downloadhelper.net/index.php
  • See-> http://www.downloadhelper.net/documentation.php

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• What software is better and safer to protect my Mac

  What software is better and safer to protect my Mac - OSX El Capitan 10.11.3? I was bombarded by MacKeeper advertising claiming recently that my Mac has "serious" problems and offering discounts of wholesale so that until recently the MacKeeper said my system was well protected and works well!

  MacKeeper is considered malware: never install or use it. No Web site can analyze your Mac for "problems." If your Mac does not appear no matter what strange behaviour, it is not necessary to make "clean-up" operations

• When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop DMG

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• What is POP, POP3 and IMAP, when I set up my email account in the HP ePrint App?

  I did as much research as I can do regarding the implementation of the HP ePrint App e-mail accounts.  If you do not see your e-mail information listed here, feel free to post below or contact your internet service company provider, by phone or e-mail, or to anyone else who might know this. I am sure there are many others that could be added, but this is a pretty comprehensive list.  I hope you find what you need to complete the setup of your e-mail applications.

  I noticed information differs from site to site, but as I've learned over time, masking the area and companies buying other companies, I just studied all the information that I could find and also if one of the names of hosts or ports does not work, then you can continue see below on this page to see if this information is the same. At that point, if you do not find what you need here, I would say that you have done all you can do before contacting appropriate for your information by email support team.

  Most of the links is active and those listed below should send you directly the pages I pulled this information since then, but only a few of them came from the real support of the sites themselves (Apple support was vague, as well as Microsoft, Macintosh and commonly used Internet services providers). Save you time by searching here first.  I hope that you will find what you need in this one-stop-shop and if you get an email that is not listed here, please report it below and I'll add it to this original document.

  Finally, as this information comes to the forum and other non-official sites, I want to add that it is a document of copy/paste/edit-for-easy-read I created in my spare time. It is a very long document, so I do is recommended to use the search and find keys to find the email that you need, but the upper part of this definition has as to what the servers, ports and are host names and the basic setup in case you need to know what are these options and their meanings.

  Here are the most common settings needed to implement most of the Clients POP3/IMAP e-mail or devices:

  The following information below can be found at http://www.swestcom.com/Support/q4.htm

  "What is POP3?

  Post Office Protocol version 3 (POP3) is a standard messaging protocol used to receive e-mail from a remote server to a local e-mail client. POP3 allows you to download e-mail messages to your local computer and read them even when you're offline. »

  "What does IMAP mean?

  The Message IMAP (Internet Access) protocol is a messaging protocol that is used to access e-mail on a remote web server from a local client. IMAP and POP3 are the two most common of messaging Internet protocols to retrieve emails. The two protocols are supported by all e-mail clients modern and web servers.

  "Main difference between IMAP and POP3:

  The POP3 protocol assumes that there is only one client connected to the mailbox. On the other hand, the IMAP protocol allows simultaneous access by multiple clients. IMAP is suitable for you if your mailbox is about to be managed by several users. »

  "What is SMTP?

  SMTP simple Mail Transfer Protocol () is the standard protocol for sending emails across the Internet. SMTP uses TCP port 25 or 2525 and sometimes you may have problems to send your messages in case your ISP has closed port 25 (How to check if port 25 is open?). To determine the SMTP server for a given domain name, the MX (Mail eXchange) should have more information."

  "When you set up:

  • POP - choose that POP-UP and the port entering the default server to 110
  • IMAP - choose IMAP and the port entering the server by default to 143
  • All other parameters are the same.
  • Username = [email protected]
  • Password = the password you set up when you set up your mailbox
  • = Incoming mail server mail.yourdomain.com
  • = Mail server outgoingsmtp.yourdomain.com
    • Outgoing requires the authentication of the server (typically found in the settings or advanced options)
    • Do NOT select "Log on using Secure Password Authentication".
    • Use the same username and password as incoming or select "use same settings as incoming.
    • Outgoing server port= 2525 or 587
      • It is subject to change according to individual preferences of your ISP.

  Note - Replace with your domain name for "yourdomain.com" and replace the first part of your e-mail address for "user".

  Email ports
  For networks, a port means endpoint to a logical connection. The port number identifies what type of port it is. Here's the e-mail ports by default for:

  • POP3 - port 110
  • IMAP - port 143
  • SMTP - port 25
  • HTTP - port 80
  • (SSMTP) - port 465 secure SMTP Protocol
  • Secure IMAP (SSL IMAP4) - port 585
  • IMAP4 over SSL (IMAPS) - port 993
  • Secure POP3 (POP) SSL - port 995.

  It is just to recap, a series of ports for people who need this information when you configure the HP ePrint app so that they could see their email from the app, I've collected over time.  I am sure that other applications also need this information.  Although long, I couldn't find a more complete place to retrieve this information.  Feel free to post additional information, faulty information or other associates subject below that it is simply a collection of data and it would be virtually impossible to test all of them. Thank you!

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• How can I know what is a plugins and if I really need it?

  I didn't even know I had 'plugins '. After seeing just a list, I want to know what they are doing and if I need them (so I can clean my system if I don't). For the most part they say technically that they are. It does not help... :))

  You can always google the name of the plugin and you're sure to get an explanation somewhere in the top 10 hits. If you are sure you don't need a pug you can always uninstall it. If you come across a site that uses it, it will ask you to install again.

  If you use several browsers always transfer your settings from one to the other may have collected plugins you no longer need.