What is a printer port

Similar Questions

• No port USB001 virtual in the drop-down list of printer ports

  I started this question in Twitter, but due to character limited in Twitter, I decided to bring the issue to this forum. How can I add a USB port to the list so that I can connect a USB printer. I tried to follow a suggestion by a Microsoft support engineer by selecting the Local port, but it led me to an assistant who would set up my printer as a network printer. my computer on a network, is not autonomous and the printer will not be on a network either. I searched the Internet for the parallel port of PC USB printer port converter but could not find the type that could be a solution. I would be grateful if someone could come up with a suggestion to help me. What point a hopeless case?

  Unfortunately, it's a very difficult situation to deal with.  The best way to install a virtual USB port is to use the printer installation software that comes with (or can be downloaded for) the printer.  What happened when you tried that?

  Sometimes, you can install another printer connected by USB (which will install the virtual USB port) and then move things more.  You - or have you ever had - any printer connected to the computer via USB?

  You sought a parallel to USB converter means that your computer has a physical parallel port but no physical USB port (or at least no functional and available USB port)?

  What is the brand and model of your printer?
  What version of Windows (XP Home, XP Pro, etc.) you have, including the service pack?

  I went through a long thread on this topic about a year ago.  The original poster has succeeded ultimately in the installation of the printer.

  You can take a look for a few suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/how-can-i-manually-add-a-usb-printer-port/38424e6c-87f8-4b93-b197-c0d2f70368b8?msgId=e40296bd-71c9-40be-acdf-dfd7597808fe&page=1

• the printer port does not recognize hasp key

  I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3.  I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key.  I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP.  I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp.  Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.

  Thank you

  Greg

  If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS.  Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar).  Restart again and press the key when the message is displayed.  You will have only a few seconds.

• Printer ports does not. Drop-down list is empty

  All my printer ports are gone!  They still exist in the registry - but when I go to try to choose a port for a printer to use the list is empty.  I can add a new TCP/IP port and it shows in the Ontario Regulation, but not in the list.  Help!

  Round trip that far with the system restore is not a good idea. System Restore is best used to solve immediate problems. I would no more than perhaps a week, week-1/2. Which printers are installed and how – local or network printers? The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have? MS - MVP - Elephant Boy computers - don't panic!

• Printer port configured incorrectly, how to remove or reconfigure

  I am setting up a new system of Windows 7 Home premium and made a mistake when setting up the new machine to access one of my existing home network printers. I have incorrectly set up a new printer port and need to know how to remove it.  When I try to install the network printer now (rightly), the wizard tells me to choose another port name because what I used already exists.  The port name is unique to my existing print server (DLink DP-G321) and should be used for this printer.  Can someone tell me how to remove the bad port configuration, or get the wizard you want to replace it?  I suspect that this may require a registry hack, which I have no problem to try with the correct instructions.  Thank you

  The 720C will not work on x 64 machines.  I contacted HP in this regard.

  "HP DeskJet 720C" is HPVDJ720. GPD.

  [HPVDJ720. GPD. CIM]

  E-mail address is removed from the privacy *, @HPVUD50. DLL,@HPVUI50. DLL,@HPVIMG50DLL,@HPVDB720. DLL,@HPVSCP50. DLL,@HPV700AL. DLL,@HPVDJ7XX. GPD,@HPVDJ720. GPD,@HPVNAM50. GPD Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• options of the printer, check the printer port option.

  I have 3 printers, when I click on the printer properties---> ports---> there 'Add port, port to remove, configure port' options are disabled. Please let me know I can help them.

  Hi, Sridhar.bb,

  The printer model?  HP, Epson, Canon?

  This should be posted in the performance and Maintenance forum.  See the menu drop-down

  http://answers.Microsoft.com/en-us/Windows/Forum/performance?tab=unanswered

  How to enable Plug and Play detection for parallel port devices in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/254664

  The personal firewall and Open Ports

  http://h30507.www3.HP.com/T5/network-inkjets-from-the-inside/personal-firewalls-and-opening-ports/BC-p/41147?JumpID=reg_R1002_USEN

  How to make changes in your Compaq Presario PC setup (CMOS)

  1. Close all running programs and choose Start , stop , and restart the computer .
  2. When the Red Compaq logo appears, press F10 on the keyboard to enter setup.
  3. Press the right arrow key to select Advanced Options . This will display the configuration options.
  4. Press the arrow key down:
     • Enable/disable or make changes to serial port information, stop in the field there and press ENTER to display the options.

     • Enable/disable the parallel/printer ports, stop in the parallel port field and press ENTER to display the options.

     • To change the type of parallel/printer port, stop in the field of devices Configuration option and press ENTER to display the options.

  5. Use the down arrow key to select the parameter and press ENTER to select change.
  6. Press the F10 key to save the new setting and exit the configuration, and then press the Enter key to choose Yes to save the settings.
  7. The system will end from in Windows.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00035717&CC=ad&DLC=en&LC=en&JumpID=reg_R1002_USEN

• I have an AO722. What type of HDMI port is on it? In or out? Windows 7 64 bit if necessary.

  I have an AO722.  What type of HDMI port is on it? In or out?  Windows 7 64 bit if necessary.

  Thank you!

  Hello

  It's an HDMI output to connect to an LCD TV (for example).

• Impossible to see or set the printer ports for printer Lexmark Z35 with Vista

  I've been using a printer Lexmark Z35 with Vista Home Premium and then it stopped working.  When I go to the control panel of configuration/printers look at the properties of a printer (even PDF printer), when I click on the Ports tab, nothing happens, it just hangs.  I left alone for 45 minutes and it is still stuck.   I searched online but could not find anything on this.

  Uninstall and reinstall the printer.

  See:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Then, download and install the latest vista drivers for the Lexmark support site.

  See also:

  Installation of Printer Ports
  http://TechNet.Microsoft.com/en-us/library/cc775439%28WS.10%29.aspx

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  RIP!

• What is the printer that HP 7525 works with the windows 8.1 operating system?

  What is the printer HP 7525 Photo Smart works with the windows 8.1 operating system?

  Hi Alex7171,

  Yes it does, you can follow this link to download drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5286643&I

• What are TCP/UDP ports must be open for version 4.8 of the VPN Client?

  What are TCP/UDP ports must be open for Cisco VPN Client version 4.8 working?

  Thank you

  Normally, you need the following ports and Protocol:

  UDP 500

  UDP 4500

  ESP

  In this case, you are using IPSec over TCP, you must open the port TCP 10000 or any other port that you want to use for (its configurable) IPSec connections.

  -Kanishka

• COM3 showing in Device Manager but not in the list of printer port

  I have a Datamax Allegoro printer that uses a USB series converter. The poster converter as installed correctly (in devices and Device Manager) and received COM3.

  When I go to change the player of the printer to use the COM3 port, it is not in the list. How can I get the COM port appears in the list of printer ports?

  Note: this port was already there, but anyway when I was working on some of the settings (I changed the adapter to use COM1 temporarily as a test, then when I went to change it back, it was gone). I tried to uninstall the driver for the adapter and then re-install again, it did not work.

  Thank you.

  Use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Good luck.

• How can I configure reader adobe XI as one of my printer port? Help, please.

  How can I configure reader adobe XI as one of my printer port? Help, please.

  Adobe Acrobat (Windows only) comes with a virtual printer that allows you to create PDF files. The free player does not work.

• Cannot add the new printer port for Central Output Server 5.7 under Windows Server 2012

  I am my output of an old Windows box to a new server migration and have problems with the new ports.  I have 6 installed instances and the last looks OK, but all the others get errors when all output is sent to them, even a Windows Test print. I have them all the same thing, with the format \\.\pipe\jetform\server5 configuration port

  When I installed the software, I installed all 6 instances then went through and added 6 local printer ports - it seemed to configure them OK this first time.

  My test was then on the 6th and last instance and went well.

  When I wanted to test the other forums, I found all simply erroneous jobs on the queue for the printer.

  If I have one of these printers connected to the 6th port, it worked fine.

  I deleted one of the ports that did not work and I tried to re-add. Then I got the message "the system cannot find the file specified."

  I tried to add the port via the registry - he added, but would not yet print.

  Then I noticed in the output server control center, when I tried to stop Central and start one of them, I got the error "unable to connect to the channel named"\\.\pipe\jetform\server5.ctr"

  I use a domain account that is configured to run Adobe services, he is a Director of field with all required fees

  I modified the local security policy to enable users to add printer drivers.

  And I have now run out of ideas! Someone at - it a?

  Thank you

  This was traced to one of still having ini files a record of the proceedings of last name installed (i.e. SERVER6).

  So it's fixed

• What are the default ports in the firewall of the ESX ESX Server groups

  Hi all

  Greetings to all!

  <! [endif] > <! [if gte mso 9] >

  I'm new to vmware. I have some experience in Linux. I need to work with EXES

  Firewall. Can someone help me with firewall ESX.

  Suppose for example, that if I need to block some ports or open a

  port to a particular network. (Clamping server)

  And I would like to know what groups of ports in ESX

  Server and what are the default ports

  ESX Server available groups

  While the physical switches have ports to which you can connect, virtual switches have groups of ports. The types of Group 3 port are machine virtual port group, port console and vmkernel service groups

  Méhul

  PS: If you find answers correct or useful, please consider giving points!

• What are the different ports used by BTA?

  Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?
  
  I am aware of the following:
  
  9001 actually mentioned when you configure a load agent
  1099 mentioned when you configure a data collector
  1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
  4444 -? necessary for the agent to load
  7071 -? necessary for the agent to load
  
  I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):
  
  7073
  8083
  8088
  
  I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.

  Ian

  Oracle.port.RMI = 4444
  Oracle.port.http = 8088
  Oracle.port.empstart = 9001
  Oracle.port.uil2 = 7071
  oracle.port.dataCollector = 7073
  Oracle.port.WebService = 8083
  Oracle.port.JNDI.rmi = 1098
  Oracle.port.JNDI = 1099
  Oracle.port.HTTPS = 8433

  You can change the ports

  - \EmpAppServer\server\default\conf\oracle.propertie

  The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:

  * 9001 (the agent communication port)
  * 1099 (Datacollector Comunication Port)
  * 8088 (for running scripts OpenScript)

  Concerning

  Alex