options of the printer, check the printer port option.

Similar Questions

• Can I print by inserting a USB stick into the USB port of a printer?

  Hello

  I'm trying to use someones printer to print my work (I can't connect intot his computer). The printer includes a scanner and a copier and has a USB port on the front. My friend uses a similar printer to print and seems to be able to print documents that she recorded in PDF format by simply putting in his pen USB into the USB port on the front of the printer, options come for her to choose which document it wants to print and off she goes.

  When I put my USB, my USB content are not started, and I have therefore no options to print. The only option of PDF who came, had to print "USB Disk Pro User Manual". I pressed this option, and a manual began printing I cancelled. How is my friend to print when she inserts his USB pen, and I can't?

  Can anyone help with this?

  Thank you!

  The USB port on the printer is made to connect to a computer, not a USB flash key.  At least not usually.  Want to check your owner's manual to find out.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• Can I connect printer to the usb port on the cable Modem CM100

  Hello

  This may seem like a stupid question, but here goes... I know that the usb port on my Linksys Cisco CM100 cable modem is an optional way to connect the modem to the computer. I wonder if I can use the usb port to connect my HP 1020 laser printer instead.

  The printer is not a network printer, and so I know that it may not work, but I have seen a few cases where a virtual port and install it as a local printer got to work.

  If I can connect the printer to the modem, and then he would give me a way to print from my laptop in the other room.  My printer is just beside my modem configuration and the router. I have a Linksys router WGR614 wireless who sees the devices on my network share, so I think he could see the printer connected to the modem (?)

  I couldn't find the answer to this anywhere. I didn't damage my equipment by blindly try this without knowing a little something. (I assume that the heart of my question is, on the CM100 usb port can be used for any usb device)?

  (I have Windows 7 64-bit operating system, in case you need to know).

  Thanks to anyone who can answer.

  djoseph

  A standard print server will allow you to connect a USB printer to your network. There are models wired and wireless depending on how you want to connect to the network.

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• We get 0 x 00000704 error. "The specified port is unknown" during the installation of the printer software.

  Original title: error 0x800f0243

  I tried to install the software for my 9130cw mfc via a wireless connection and I got this error, followed by an error of 0 x 00000704.  "The specified port is unknown."

  Ive had no problem installing the rest of the printer on my other laptop... but now its giving me a problem on these new.  Any help is welcome

  Hello

  Please write to us.

  The question you are faced to could be due to incorrect settings of the printer.

  To better understand the issue, I want to know:

  1. What is the brand and model of your computer?
  2. Have you installed the printer software on the other computer via the wireless connection/USB port?

  Please, try the following steps and check if that helps.

  1. Press the Windows key + R key, type control, and then click Ok.
  2. In all the elements of the Control Panel, click on devices and printers.
  3. Then double click on Add a printer , and then choose Add a network, wireless or Brother MFC 9130cw printer.

  Feel free to write us again if you have other queries, comments or suggestions using your Windows.

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• My LaserJetPro 400 printer is not recognized on the USB ports. With the help of El Capitan OSx

  Since I installed OSx El Capitan, I had intermittent problems with the USB ports to connect to my HP LaserJet printer. I first thought that the older printer was not compatible with the new OSx software, so I've just upgraded to a new HP LaserJet Pro 400 M451dw. same results and the computer is not even connect to the printer. The number of post detailing a similar problem, I would hope that apple now had a fix for this problem...

  It gets very frustrating to say the least.

  Help

  T Cooke

  HI T Cooke,

  Welcome to Apple Support communities.

  The article below provides a lot of information and troubleshooting tips that may help you solve problems with your MacBook Pro grateful and print to your printers.

  OS X El Capitan: print troubleshooting

  Ciao.

• HP Deskjet 1010: Wireless printing through a TG1672G of ARRIS, use the USB port on the modem?

  It is possibel to print wireless with a TG1672G of ARRIS, use the USB port on the modem?

  Hello

  There is no print server function so you can not:

  http://gditechnology.com/manuals/Arris_TG1672G_Data_Sheet.PDF

  Kind regards.

• Where is the USB port on the printer 4500 hp envy all-in-one

  Where is the USB port on the printer 4500 hp envy all-in-one

  So the question for your answer:

  Compatible products for: HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)

  Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550

  And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

  For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

  All the best...

• No port USB001 virtual in the drop-down list of printer ports

  I started this question in Twitter, but due to character limited in Twitter, I decided to bring the issue to this forum. How can I add a USB port to the list so that I can connect a USB printer. I tried to follow a suggestion by a Microsoft support engineer by selecting the Local port, but it led me to an assistant who would set up my printer as a network printer. my computer on a network, is not autonomous and the printer will not be on a network either. I searched the Internet for the parallel port of PC USB printer port converter but could not find the type that could be a solution. I would be grateful if someone could come up with a suggestion to help me. What point a hopeless case?

  Unfortunately, it's a very difficult situation to deal with.  The best way to install a virtual USB port is to use the printer installation software that comes with (or can be downloaded for) the printer.  What happened when you tried that?

  Sometimes, you can install another printer connected by USB (which will install the virtual USB port) and then move things more.  You - or have you ever had - any printer connected to the computer via USB?

  You sought a parallel to USB converter means that your computer has a physical parallel port but no physical USB port (or at least no functional and available USB port)?

  What is the brand and model of your printer?
  What version of Windows (XP Home, XP Pro, etc.) you have, including the service pack?

  I went through a long thread on this topic about a year ago.  The original poster has succeeded ultimately in the installation of the printer.

  You can take a look for a few suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/how-can-i-manually-add-a-usb-printer-port/38424e6c-87f8-4b93-b197-c0d2f70368b8?msgId=e40296bd-71c9-40be-acdf-dfd7597808fe&page=1

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• the printer port does not recognize hasp key

  I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3.  I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key.  I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP.  I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp.  Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.

  Thank you

  Greg

  If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS.  Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar).  Restart again and press the key when the message is displayed.  You will have only a few seconds.

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.