What is a relationship between the data store and LUN?
Hello
I added 3 LUNS to a data store, but I can't list them since the MOB data store. Could someone tell me how to do it.
Thanks in advance.
Lee
LUNS was formatted as VMFS and created a data store? If not, it will not be displayed. You can search for available LUNS that can be used to create a VMFS with QueryAvailableDisksForVmfs volume
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
Tags: VMware
Similar Questions
-
relationship between the active layer and enable layer
I use AE CC 12.2.1. I think that is not specific to the AE version but something general.
When I read my layer by extendscript property, it shows layer.enabled = true and layer.active = false. If I change layer.enabled from false to true, the active property seems to follow the enabled property also. I don't know the meaning of 'active', because even layer.active = false, there is no problem to manage the layer in AE.
I would like to know something.
1. How do the status layer.active to AE UI even I check it in the source of the script?
2. What is the difference between layer.active = false and true?
3. What is the relationship between the layer active and active layer?
Thanks in advance.
[Moved to After Effects - moderator script forum]
In general, a layer is activated if the eyeball is on in the timeline panel. It is active if the layer is activated and that the model currently is between the points layer and output. You can control the active state. The active state is determined by the active state, in and out of the points and the current time.
There are some exceptions (audio layers, other layers prone, etc.), but that's about all.
Dan
-
I'm looking for the relationship between the unit ORGANIZATION and self-service workflow?
Hi all:
I have 3 UO and 3 files of wft different workflow self-service in the my HR system. How can I know the relationship between the unit ORGANIZATION and self-service workflow? I mean what wft file corresponds to an ORGANIZATIONAL unit?
my environment is oracle 11.5.9. self-service 4.1 | workflow Builder 2.6
for example:
OR 1 = > HRSSA1.wft
OR 2 = > HRSSA3.wft
OR 3 = > HRSSA2.wft
I'm looking for this relationship?
Concerning
TerryTerry,
I mean what wft file corresponds to an ORGANIZATIONAL unit?
Open the workflow designer using wft files and see if you can find any reference to these OUs.
Thank you
Hussein -
How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed
Hi João,.
To help solve the problem, remove the PC from the domain and then connect the computer to the domain.
Click the Microsoft KB Article below for troubleshooting steps.
The trust relationship between this workstation and the primary domain failed
Let us know how it goes.
Thank you
-
Hello
We strive to integrate the OPA attributes to the Cloud Service Oracle tables to store session data for the customer portal users.
We tried mapping the attributes of the OPA with relevant tables of cloud Service Oracle? Is there any installation of additional data to create to retrieve the session data for the particular user / contact?
We managed to save tha data in arrays of cloud Service for users of ananymous and also well regarding customers portal users but to preconfigure data do we need to do any additional configuration / mapping to the contact table?
Please help on the establishment of the relationship between the contact and Global (new table created in cloud Service) tables.
Thank you
Vivek
Hi Vivek,
To load data from the Contact in the the OPA policy template, you must configure the widget of the OPA. For instructions, see the following articles:
- Incorporate an interview that uses data portals in Oracle Service Cloud Customer Portal
- Deploy and configure the sample OPA widget
- Insert the widget to sample in a customer portal page
Obviously, you need to do the mapping in OPM as well, but even if the mapping is correct, you will not be able to load the Contact data unless the widget of the OPA is implemented.
See you soon,.
Jasmine
-
I am new to Adobe flash and tried to create an E-card for a class. My teacher said that it is better just to have a keyframe for each layer in the main timeline and do all the clips of animation and film on the deadlines of each symbol. I'm having a hard time to understand how it works. To illustrate my confusion, let's start with an example. I have a kite I want to start flying to frame 20. The kite is a symbol, so I create movement to 20 image interpolation in chronology of the wing. 20 on the symbol Timeline frame occurs at the same time as frame 20 of the MAIN scenario, or are they completely separate instances of time?
Part of my mission, is should I use code snippets to add an element of interactivity to the Ecard. My confusion about the timeline affects my ability to do so. My teacher said that you need a stop on the first keyframe code to make sure that things will not start before you click the play button. Can I put the stop action on the main timeline or in the timeline of each symbol, or both? Let's say I want to create a button that makes the kite flies when I click it. Where to play action 'go to and play', in the Assembly of the wing?
I would greatly appreciate any help from the community. I'm the kind of person who needs to understand how things work. I searched for days, watch videos and read articles, but I still need to find a resource that effectively dissolved my confusion on this subject. So if anyone knows of any tutorials that explain how the main timeline and symbol timelines coincide, please share them with me. Thank you very much for your time.
(P.S. are CC Animate Adobe and Adobe Flash Professional CC the same?)
Thank you both for responding. Yes, your answers were useful, but a bit Advanced. I hope that you don't mind me asking a few follow-up questions.
For Pete47-
So I put my stop() in the main timeline. How the actionscript in the main timeline code works on the chronology of the wing if the two are separate? Why not put the ActionScript on chronology of the wing? Clearly, there must be an interaction between the main timeline and symbols, right? When you say "you can drag the symbol on the main timeline and it will run when you start", what do you mean by that? Like GETTING started, in the main timeline or in the scenario of the symbol? As you can see I am very confused by there!
For Colin.
I thought that Pete said you want to only have a keyframe in the main timeline. Then, when you said... "you can do it with an interpolation of the main timeline... from the beginning to the final position," why would you animate the motion on the main timeline? Why not in the chronology of the wing, can create another symbol of the tail in this period?
And if the schedules of chronology and main symbol are separated, how SYNCHRONIZE you together different symbols to their movement to work together? And why should it be like that anyway?
I am new to the community here, the last thing I want to say because you two sounds very knowledgeable on the Flash. How did you get your start? Did you start by watching the tutorials, read the manual, or something else?
Once more, you have my abundant thanks for taking the time to help.
-
We have warehouses of data which are seen by more than one cluster. I need a script that will display:
all stores of data seen by a cluster
the virtual machines on the data store
the host of the virtual machine is on
the cluster the host is in
The output I want is
name of the store of data, the VM name, host name, the name of the Cluster
any help would be appreciated
Pretty sure this will do what you need:
$report = @() Foreach($cluster in Get-Cluster){ $datastores = $cluster | Get-VMHost | Get-Datastore foreach($datastore in $datastores){ $vms = $datastore | Get-VM If ($vms.count -ge 1){ foreach($VM in $vms){ $object = New-Object -TypeName PSObject -Property @{ Datastore = $datastore.Name VM = $VM.Name HostName = $VM.VMhost Cluster = $cluster } $report += $object } } } } $report | Export-Csv C:\Temp\VMs.csv -NoTypeInformation -UseCulture
If you only want to shared data warehouses you can then use
$datastores = $cluster | Get-VMHost | Get-Datastore | Where {$_.Extensiondata.Summary.MultipleHostAccess -eq $True}
Hope this helps
-
PowerCLI 5.0 - get the data store and VM information
I am trying to reach the list of virtual machines and their data warehouses in a specific cluster. It seems that the name of the data store does not... Any ideas?
PowerCLI C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI > Get-Cluster "NOMCLUSTER" | Get-VM-name * | Get-hard drive | Export-Csv - NoTypeInform
c:\Scripts\***.csv creation
Get-Cluster * | Get - VM | Select Name,
@{N = 'Cluster'; {E = {Get-Cluster - VM $_}}, '@{N = "ESX host"; {E = {Get-VMHost - VM $_}}, '
@{N = "Datastore"; E = {Get-Datastore - VM
$_}} -
Help with script from beginner to the data store and hard drives
Hello
I am quite new to scripting, and recently, I created a monstrosity below.
The problem is with the results. I have no idea why in the results I get the name of the virtual machine and its data store over and over again until all disks are highlighted.
Any help will be very very much appreciated.
The script:
$raport = @)
Foreach ($i in (Get-Content "Y:\vms.txt"))
{
$rekord = «»
$vm = get-vm-name '$i '.
$dysk1 = $vm | Get-hard drive | where {$_.} Name - eq 'Disk 1'}
$datastore1 = $dysk1.filename.split("]") [0].split("[") [1]
$disks = $vm | Get-hard drive
{foreach ($disk in $disks)
$hd = «»
$disksize = ($disk. CapacityGB)
$hd += $disksize
{$rekord += $vm.name + ";" + $datastore1 + ";" + $hd}
$raport += $rekord
}
$raport | out-file 'Y:\dyski.csv '.
The results in csv:
VM1Name; datastoreName; 60; VM1Name:datastoreName; 50; VM1Name; datastoreName; 40
VM2Name; datastoreName; 45; VM2Name; datastoreName; 40
The results of dream in csv:
VM1Name; datastoreName; 60; 50 40
VM2Name; datastoreName; 45 40
etc.
Try like this
$raport = @)
Foreach ($i in (Get-Content "Y:\vms.txt"))
{
$rekord = «»
$vm = get-vm-name '$i '.
$disk = $vm | Get-hard drive
$datastore = ($disk | where {$_.}) Name - eq "disk 1" hard}).filename.split ("]") [0].split("[") [1].
$rekord = "$($vm.)". The name); $($datastore); $(($disk | sélectionnez-ExpandProperty CapacityGB)-join ' |') »
$raport += $rekord
}
$raport | out-file 'Y:\dyski.csv '.
-
I accidentally deleted the vmdk file that has my OS on it by pressing the "Delete selected items" button in the window of browser data store. Is there anyway to recover? I have a snapshot that doesn't seem to work. There is still the VMDK file in there, but it has now 'delta' be added at the end. Now I get an error message when I try to turn on my VM saying that he doesn't get the vmdk file, of course.
From the screen shots looks you have deleted only the descriptor hard files that can be recreated. To ensure this is the case, please provide a complete list of the files in the folder of the virtual machine and attach the last file.log of vmware(from the virtual work computer) to a post response to view required details.
André
-
List virtual machines within a host, the data store and the specified how cluster?
Hello
I found the code shows but not able to understand. The exit is not what I want.Get-VM | Select Name, @{N="Cluster";E={Get-Cluster -Name "Site1UCSCluster01" }}, @{N="ESX Host";E={Get-VMHost -VM $_}},@{N="Datastore";E={Get-Datastore -VM $_}} |fl
But, the exit wrong that these virtual machines do not reside on Site1UCSCluster01:
Name : CBEDM Cluster : Site1UCSCluster01 ESX Host : Host1 Datastore : CBEDM-DS3-R5 Name : CBEDMTest Cluster : Site1UCSCluster01 ESX Host : Host2 Datastore : CBTEST-DS1-R5
Thanks for your help,
So try like this
$clusterName = "MyCluster" Get-Cluster -Name $clusterName | Get-VM | Select Name, @{N="Cluster";E={$clusterName}},@{N="ESX Host";E={Get-VMHost -VM $_ | Select -ExpandProperty Name}},@{N="Datastore";E={Get-Datastore -VM $_ | Select -ExpandProperty Name}} |fl
-
What ports to use between the server host and ESX license
Hello
I've implemented a standalone ESX host and want it connects to the license server.
Is there anyone knows what port must be open for the connection from the host ESX to the license server?
Thank you!
LAN
27010
27000
See http://vmetc.com/2008/11/06/vmware-vi-35-port-diagram/ for full information
-
Help display information from the data store
Hi, I'm trying to format a table with information from various commands, and I can't find out how to do it.
Basically I want the table to have the following information:
ESX host - DatastoreName - CanonicalName - CapacityMB - MultipathPolicy
The problem is the get-scsilun cli annoys me only the canonical ability and multiple trips, but I want to add the other get-vmhost and get-datastore information
The command I'm ussing is:
Get-vmhost | Get-ScsiLun | WHERE-object {$_.} Seller - eq "EmC" - and $_. LunType - eq 'disc'} | Format-Table-property CanonicalName, CapacityMB, MultipathPolicy-auto | Out-String-width 120
No idea how to do that?
Thanks in advance!
Pablo. -.
Try something like this
$report =@() foreach($esx in get-vmhost){ foreach($lun in (Get-ScsiLun -VmHost $esx -LunType disk | where-object {$_.Vendor -eq "EMC"})){ foreach($ds in (Get-Datastore -VMHost $esx)){ $ds.ExtensionData.Info.Vmfs.Extent | %{ if($_.diskName -eq $lun.CanonicalName){ $row = "" | Select Host,DS,CanonicalName,CapacityMB,MultiPathPolicy $row.Host = $esx.Name $row.DS = $ds.Name $row.CanonicalName = $lun.CanonicalName $row.CapacityMB = $lun.CapacityMB $row.MultiPathPolicy = $lun.MultipathPolicy $report += $row } } } } } $report | ft -AutoSize
The link between the data store and the logic unit number is done by comparing canonicalname the LUN with each canonicalname of the extent of the disk of the data warehouses.
-
Dell virtual disk are larger. You want to increase the size of the data store.
Hello
I started the implementation of a server ESXi 5.5 Update 1 this week. I didn't know Dell shipped the server with two virtual disks instead of one. I realized this _apres_ that I had already created the data store and setup a few virtual machines to the breast. I called Dell who sent specific instructions to increase the removal of the second (empty) virtual disk and add it to the main. In the end, I increased the single VD from 2 TB to 3 TB and I want to give the remaining space in my store of data.
I tried to follow the article here that explains how to do this via the CLI.
Well, he did not altogether. Fortunately, I was able to recover my datastore my setting start and end sectors to their original numbers. But I'm still left with this almost 1 TB of space that I can not attribute to the data store. After that I reread storage adapters in the client, the new Dell disk size resulted under measurement devices. Click on "increase...". ", generates the following error which led me on the way to the CLI method:
Call "HostDatastoreSystem.QueryAvailableDisksForVmfs" to object "ha-datastoresystem" on ESXi '[myservername]' failed.
I will paste my notes that I took everything by jobs. Things have exploded the rails when I put 4 partition size to the largest size. Any help, please?
---
I use that as a guide:
1 use start hardware device management tools to increase the capacity of additional disk to the device. For more information, commit your hardware provider.
This has been done. The new size of the virtual disk is 2791,88 GB (TB 2,79188)
2. open a console to the ESXi host.
Pretty simple.
3. get the DeviceID for the data store to change.
~ # vmkfstools Pei "/ vmfs/volumes/datastore1 / '.
System file VMFS-5, 60 extending on 1 partition.
File system label (if applicable): datastore1
Mode: public
Capacity 1971926859776 (blocks of files 1880576 * 1048576), 1042688245760 (994385 blocks) prevail, max size of the 69201586814976 file
UUID: 534e5121 - 4450-19dc-f8bc1238e18a 260d
Partitions split (on 'lvm'):
NAA.6c81f660ef0d23001ad809071096d28a:4
A couple of things to note:
a. the device for Datastore1 ID is: naa.6c81f660ef0d23001ad809071096d28a
b. the number of Partition on the disk is: 4 ' [...]: 4 "»
c. the prefix, "naa," means "Network address authority" the number immediately after is a single logical unit number.
4. Enter the amount of disk space available on the data store.
~ # df h
Size of filesystem used available use % mounted on
VMFS-5 1. 8T 865.4 G 971,1 G 47% / vmfs/volumes/datastore1
5 team of the device identifier, to identify the existing partitions on the device by using the partedUtil command.
~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.
364456 255 63 5854986240
1 63 80324 222 0
2 80325 8466884 6 0
3 8466885 13709764 252 0
4 13711360 3865468766 251 0
~ #
According to the table in article KB
4 13711360 3865468766 251 0 - primary #4, type 251 = 0xFB = VMFS, 13711360-3865468766 areas
| | | | |
| | | | \---attribut
| | | \---type
| | \---se finishing sector
| \---a starting from sector
partition \---Numero
Also note how the number of section start the old end sector number is + 1.
6 identify the partitions that need to be resized and the size of the space to use.
We want to resize partition 4. I don't really understand the last part of this sentence, however. Read more.
7 the number of sector end you want for the target data store VMFS partitions. To use all out at the end of the disc space, remove 1 of the size of the disk in the areas as described in step 5 in order to get the last usable area.
ESXi 5.x has a command to do this:
~ # partedUtil getUsableSectors "/ vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a".
1 5854986239
This means that we want 4 Partition of "naa.6c81f660ef0d23001ad809071096d28a" to be:
13711360 - 5854986239 (i.e. the end of the disc)
8 resize the partition containing the target VMFS Datastore using the command partedUtil, specifying the original existing partition and the desired end sector:
Using the above information, our command is:
resize # partedUtil ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 5854986239
9 step 8, the partedUtil command can report the warning:
He did not. Displacement.
10. the tables of partitions have been adjusted, but the VMFS data within the partition store is always the same size. Now there is an empty space in the partition where the VMFS data store can be grown.
11 launch this v vmkfstools command to perform a refresh for VMFS volumes.
Fact.
12 reach the VMFS Datastore in the new space using the command - growfs vmkfstools, specifying the partition containing the VMFS Datastore target twice.
vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 '.
It did not work. I got an error:
/ vmfs/volumes # vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' /vmfs/devices/disks/naa.6c81f660ef0d «»
23001ad809071096d28a:4 ".
Cannot get device head way /dev/disks/naa.6c81f660ef0d23001ad809071096d28a:4 information
Also the partition was very different to what I asked:
~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.
364456 255 63 5854986240
1 63 80324 222 0
2 80325 8466884 6 0
3 8466885 13709764 252 0
4 13711360 1560018942 251 0
I fixed it by running these commands:
~ # partedUtil resize ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 3865468766
~ # vmkfstools v
~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.
364456 255 63 5854986240
1 63 80324 222 0
2 80325 8466884 6 0
3 8466885 13709764 252 0
4 13711360 3865468766 251 0
Update:
Since it was such a new machine, not in active production, we have safeguarded the VMs management off the ESXi host. Then flattened the virtual disk, recreated, and then created a store of data with the right size. (TPG this time, naturally.) We put the management of virtual machines on the data store. For Windows virtual machines, we have restored the using AppAssure. Everything is ok now.
Need to add a new item to the list of punch: check what Dell has done the configuration of the virtual disks. :-)
-
Add the total size of data store and space remaining
Hi,
What would be the easist way to add the total datastore size and remaining datastore size to the following.
I do emphasise, esasiest, since I'm as green as can be to powercli, powershell for that matter. I'm trying to learn in babystepsGet - VM $VM | %{ $_. Name; ($_ | get-datastore | select name). Name}
At the moment I get day like this, I get to the above.
DataStoreName (Add info here on DS size?)
vmname
DataStoreName (Add info here on DS size?)
vmname
...
...
...
Thank you!!
The $_ represents the object that has been passed through pipeline (the ' |') of the previous cmdlet.
For example
Get - VM | %{$_. Name}
The cmdlet Get - VM will get all the VMs on the servers of vSphere to which you are connected.
The pipeline ('|) ') said these VM objects one by one to the following code.
In what is a Foreach-Object (alias is '%') who will send the name of the virtual machine (available in the variable $_) to the default output.
On a Select-Object cmdlet, you can select properties of the object that was passed through the pipeline, or you can use what is called a "calculated property. Such a calculated property consists of a pair of hash, name (N) and Expression.
Obviously, name is the name you want to give to this calculated property.
Expression is the block of code that must be executed.
For example
Get-Datastore. Select Name,@{N="CapacityGB; E={$_. CapacityMB/1 KB}}
All database objects are passed to the Select-Object cmdlet.
The Select cmdlet displays the name of the data store, and it will display a property called CapcityGB, which displays the ability to store data in GB.
Notice how the property CapacityMB that is present in the data store object is converted to GB by the code in the Expression block.
The part of the Expression has not always need to do something with a property of the object that was passed.
For example
Get - VM | Select Name, @{N = 'Current time'; E = {Get-Date}}
In this case the Select-Object cmdlet displays the Name property of the virtual computer object that has been sent.
And it will display the current time as the propertyname "current time".
This is an example of a calculated property that has nothing to with the object passed through the pipeline.
I hope that clarifies the code a bit.
Maybe you are looking for
-
Operating system on the new hard drive recovery
Hello The hard drive of my Satellite 1900 303 hangs almost (SMART), and the warranty has expired.Can I put a new hard drive in it and use the old recovery DVDs to put Windows XP on it? (I suspect it works only on the original hard drive) Thanks in ad
-
How can I change the documents/slide keynote impressions? Everything I try just looks bad compared to what can do the PPT...
-
Driver Intel Rapid Storage Technology 10.6.0.1002 - posted
http://support.Lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-74430
-
roll bar does not not on all pages on the internet.
HP Pavilion all-in-one MS214aXC6474 Windows 7 installed. No error message. No changes made to the system. What research of real estate or doing transactions online of the scrollbar will work correctly on the first page on what I am trying to display.
-
What is the difference between containers and hyper-v server windows?
Hello What is the difference between containers and hyper-v server windows? Thank you