What is a way to make the TABS of the browser is entirely independent of each other - and the same question about the browser windows. Thank you!

Similar Questions

• Is there a way to make the snap windows volume mixer all volume of requests to match the main volume?

  I noticed that windows likes to change my settings of volume for some applications, probably in an effort to help me, but it seems to create more problems than it prevents. For example, when I start a game, my itunes volume is lowered. The way I calculate it, this often leads to a variety of different volume levels for different applications after awhile, and if I turn up the volume with my volume key (which increases the overall volume) they only rise proportionally. So if the volume of Chrome is 50% and iTunes' volume is 10% and I increase the volume to maximum, iTunes volume only goes up to 20%, forcing me to manually open the mixer volume and level everything. I noticed the overall volume take a gray line in the whole of the mixer, is there a way to force all applications to align on this gray line and does not move unless I change myself in the mixer? Uncheck everything in the volume control options didn't fix it.

  Thank you.

  The way I did earlier was to move all the sliders up to 100% (look at your ears, however, if you have headphones on - the "bong" sound system is going to be quite noisy!).  After that I did, all volume settings have been aligned on the line grey and synchronized with the master volume.

• I took off a radio player & have now no volume on my ESPN videos or anything else. What should I download to recover the volume. Thank you!

  I have Windows XP on a Dell Inspiron.  Thank you.

  Have you tried reinstalling the drivers?
  If this is not the case, do.
  Browse all steps at the following link:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can also try a system restore to before that the problem began:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• What is the best way to make the window of the program to display in a secondary window?

  What I did to drag the window of the program on my secondary monitor.

  But when I did, I noticed that the window of program on my secondary monitor window is different in that all the icons/buttons (for example the timer/counter... etc) which will usually appear in the program window now are no longer there when the program window is in the secondary monitor.

  I was wondering what a bad way to run the program window to display on a secondary monitor?

  Can I find out the correct way to lead program window to display on a secondary monitor?

  Thank you

  If you use the emission of mercury, then only the video full screen, no button or the menu. If you not anchored and dragged the program for a second monitor monitor Panel, it should not change the buttons he had previously. You can alternate the slot and off the power of the key/tool icon > display the transport controls.

• What is the best way to make the completely white background for the pictures of the products?

  What is the best way to make the completely white background for the pictures of the products?  I just need to show a product on a completely white background.

  Shoot on properly informed white background is easy. Then be tot apply an adjustment layer to whiten the BG, then apply a mask for the domains you want to not so bright.

• What is the best way to make the uniform skin (not necessarily blur it!)

  Hello

  I have some photos where the skin of the leg of the model is not uniform brighteness. Without this vagueness, I tried the clone stamp, but it is very difficult not to introduce new variations of brightness.

  What is the best way to make the uniform skin of brightness (in fact, the same color!)?

  Thank you

  Juan dent

  I know EXACTLY what you mean.  I was doing something exactly on these lines just yesterday.

  It is not trivial, but it is doable.

  For 'hard points', you can try the Spot Healing Brush first.

  But here is a tip that I use sometimes which may well increase overall finesse:

  1. select just the surface of the skin.

  2. selection a little market and soften the edge, just to make sure that you don't mess the edges.

  3. median filter - noise - and set the RADIUS to be big enough.  Look at the image to see the level of smoothing.

  4. change - bland and knock back effect, while it is not perfect, but makes a subtle improvement.

  

  

  

  Then, for clearing-up soft darkening, try the burn and Dodge tools, at a low level of exposure (and possibly with Airbrush Mode).  Work slow.

  Cloning with low opacity can sometimes help as well.

  -Christmas

• Is there a way to make the safari opens a new page every time?

  Hello

  I'm kinda new here and I would like to ask a question. I now use an iPhone as a primary device, instead of Android. But is there a way to make the safari to remove all tabs when you close, and when you open it, it just opened a new page or a blank page? My phone is just laying around sometimes and I let my friends to use. But when I close safari after I order something or when I'm checking my bank account, they can all see when they open up safari...

  All I can think is to close all tabs before close Safari, or use it in private Mode:

  Enable or disable the navigation on your iPhone, iPad or iPod touch - Apple Support

• Is there a way to make the LPT1 port EPP in Windows?

  Original title: is there a way to make the LPT1 port EPP in Windows?

  I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Windows?

  Hi RonaldEchols,

  ·         What is the model number of the device (printer)?

  ·         You use what version of BIOS (Basic Input Output System) and the motherboard?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Is there a way to make the shortcuts for Internet Protocol Version 4?

  Hello

  I have the Internet Protocol V4 settings:

  IP address: 192.168.0.101

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.0.1

  Preferred DNS server: 192.168.0.1

  I want to know if there is some way to make the shortcut for these settings so I can click on this shortcut when I want to configure the Internet Protocol V4?

  Thank you

  Rami,

  Yes, you can do what you want.  See this forum is different for different networks available static IP thread and the thread of TechNet that it links to is it possible to assign a static for each TechNet netowrk IP address

  Once you configure the properties they should stay that way so please can you explain why you want to be able to keep these values reset?

  Denis

• Is there a way to make the character will blink or squint with one eye?

  Hi all!

  Is there a way to make the character will blink or squint with one eye? For example, in the 'Customize-> head' - Section only, I can customize some points on both eyes at the same time, but I have not found a way to make the character 'close' one eye so that it looks as if it is kind of flashing. It is even possible to do it with fuse... or IM just in the wrong place?

  Thanks in advance!

  Fabian Hey!  Fuse face expressions are more than one aspect of this face when you ask 'preview' it have rather intended for the laying of the real face.  We generally recommend leaving the fuse facial expressions and make laying in Photoshop, once you get there!  Here is a screenshot showing where you can access controls of the face in Photoshop.  That being said - I didn't "think that we have a unilateral wink or blink in fuse or Photoshop at the moment.  Might be interesting to post an idea in the forum of ideas for "better facial posing?"

  1. Select the 3D layer in the layers panel
  2. Select the skeleton of the character in the 3D Panel
  3. In the properties of the Panel change to the tab 'face '.
  4. Select an expression of search results
  5. Adjust the expression using the sliders and the offsets

  

• Is there a better way to make the selection on this slider?

  Is there a better way to make the selection on this slider?
  I need to retrieve the test scores max (tesc_code SO1, S02, S03 etc... etc...)
  I get the results presented here, but I wonder if it's a better way to do this.
  The results should be back in the same cursor... e
  

  CURSOR c_sortest_SAT_scores(p_pidm IN saturn.sortest.sortest_pidm%TYPE,
  p_term in saradap.saradap_term_code_entry%TYPE)
  IS
  SELECT   s01.sortest_pidm       pidm_s01,
           s01.sortest_tesc_code  tesc_code_s01,
           s01.sortest_test_score score_s01,
           s02.sortest_pidm       pidm_s02,
           s02.sortest_tesc_code  tesc_code_s02,
           s02.sortest_test_score score_s02,
           s07.sortest_pidm       pidm_s07,
           s07.sortest_tesc_code  tesc_code_s07,
           s07.sortest_test_score score_s07,
           s08.sortest_pidm        pidm_s08,
           s08.sortest_tesc_code   tesc_code_s08,
           s08.sortest_test_score score_s08,
           s09.sortest_pidm        pidm_s09,
           s09.sortest_tesc_code   tesc_code_s09,
           s09.sortest_test_score  score_s09
    FROM   saturn.sortest s01,
           saturn.sortest s02,
           saturn.sortest s07,
           saturn.sortest s08,
           saturn.sortest s09
   WHERE       s01.sortest_tesc_code IN ('S01')
           AND s01.sortest_pidm = p_pidm
           AND s01.sortest_term_code_entry = p_term
           AND s01.sortest_test_score =
                 (SELECT   MAX (s01a.sortest_test_score)
                    FROM   saturn.sortest s01a
                   WHERE   S01.sortest_pidm = s01a.sortest_pidm
                           AND S01A.sortest_tesc_code IN ('S01'))
           AND s02.sortest_tesc_code IN ('S02')
           AND s02.sortest_pidm = p_pidm
           AND s02.sortest_term_code_entry = p_term
           AND s02.sortest_test_score =
                 (SELECT   MAX (S02A.sortest_test_score)
                    FROM   saturn.sortest s02a
                   WHERE   S02.sortest_pidm = s02a.sortest_pidm
                           AND S02A.sortest_tesc_code IN ('S02'))
           AND s07.sortest_tesc_code IN ('S07')
           AND s07.sortest_pidm = p_pidm 
           AND s07.sortest_term_code_entry = p_term
           AND s07.sortest_test_score =
                 (SELECT   MAX (S07A.sortest_test_score)
                    FROM   saturn.sortest S07A
                   WHERE   S07.sortest_pidm = S07A.sortest_pidm
                           AND S07A.sortest_tesc_code IN ('S07'))
           AND S08.sortest_tesc_code IN ('S08')
           AND S08.sortest_pidm = p_pidm 
           AND S08.sortest_term_code_entry = p_term
           AND S08.sortest_test_score =
                 (SELECT   MAX (S08A.sortest_test_score)
                    FROM   saturn.sortest S08A
                   WHERE   S08.sortest_pidm = S08A.sortest_pidm
                           AND S08A.sortest_tesc_code IN ('S08'))
                   AND S09.sortest_tesc_code IN ('S09')
           AND S09.sortest_pidm = p_pidm 
           AND S09.sortest_term_code_entry = p_term
           AND S09.sortest_test_score =
                 (SELECT   MAX (S09A.sortest_test_score)
                    FROM   saturn.sortest S09A
                   WHERE   S09.sortest_pidm = S09A.sortest_pidm
                           AND S09A.sortest_tesc_code IN ('S09'));

  Hello

  The problem is that you to act as a Cartesian product with all the tables (you will get: S01 * S02 * S08 * S09 lines!) Is it really what you want?
  I don't think...

  Wharton, you can do (with no Cartesian product) is:

  CURSOR c_sortest_SAT_scores(p_pidm IN saturn.sortest.sortest_pidm%TYPE,
  p_term in saradap.saradap_term_code_entry%TYPE)
  IS
  SELECT sortest_pidm pidm, sortest_tesc_code tesc_code,
         sortest_test_score score
    FROM sortest
   WHERE (sortest_tesc_code, sortest_test_score) IN (
            SELECT   sortest_tesc_code, MAX (sortest_test_score)
                FROM sortest
               WHERE sortest_tesc_code IN ('S01', 'S02', 'S07', 'S08', 'S09')
                 AND sortest_pidm = :p_pidm
                 AND sortest_term_code_entry = :p_term
            GROUP BY sortest_tesc_code)
     AND sortest_pidm = :p_pidm
     AND sortest_term_code_entry = :p_term
  

  However you absolutely need a Cartesian product, you can do:

  WITH allrows AS
       (SELECT sortest_pidm pidm, sortest_tesc_code tesc_code,
               sortest_test_score score
          FROM sortest
         WHERE (sortest_tesc_code, sortest_test_score) IN (
                  SELECT   sortest_tesc_code, MAX (sortest_test_score)
                      FROM sortest
                     WHERE sortest_tesc_code IN
                                            ('S01', 'S02', 'S07', 'S08', 'S09')
                       AND sortest_pidm = :p_pidm
                       AND sortest_term_code_entry = :p_term
                  GROUP BY sortest_tesc_code)
           AND sortest_pidm = :p_pidm
           AND sortest_term_code_entry = :p_term)
  SELECT s01.pidm pidm_s01, s01.tesc_code tesc_code_s01, s01.score score_s01,
         s02.pidm pidm_s02, s02.tesc_code tesc_code_s02, s02.score score_s02,
         s07.pidm pidm_s07, s07.tesc_code tesc_code_s07, s07.score score_s07,
         s08.pidm pidm_s08, s08.tesc_code tesc_code_s08, s08.score score_s08,
         s09.pidm pidm_s09, s09.tesc_code tesc_code_s09, s09.score score_s09
    FROM allrows s01, allrows s02, allrows s07, allrows s08, allrows s09
   WHERE s01.tesc_code = 'S01'
     AND s02.tesc_code = 'S02'
     AND s07.tesc_code = 'S07'
     AND s08.tesc_code = 'S08'
     AND s09.tesc_code = 'S09'
  

  The lines will be stored in memory to a temporary table before that product happen (should be faster)...

• What can I do to make the program to run in WIndows 7 it says "incompatible".

  Original title: Programs compatibility Application Applications Apps game games Legacy Crash crashes Hang Application crashes.

  I have a window 7 but a version 6.1 program does not run in it. He says it's incompatible with the program. What can I do to make the program work?

  Hi Tony,.

  For you help I would be grateful if you could answer the following question:

  What program are you trying to install?

  I suggest you to install the program in compatibility mode and check.

  Make older programs in this version of Windows

  Most of the programs created for earlier versions of Windows also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try to change the program compatibility settings, by using the program compatibility problems or manually choose compatibility settings.

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the link.

  Help with Windows 7 compatibility issues

  http://Windows.Microsoft.com/en-in/Windows7/help/compatibility#T1=softwarecompat

  Program Compatibility Assistant: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Program-Compatibility-Assistant-frequently-asked-questions

  For more information, see the link

  Find Windows-compatible programs

  http://Windows.Microsoft.com/en-in/Windows7/find-Windows-compatible-programs

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Question 1: Is there some sort of privilege get admin and the State of return permanently? Question 2: Is there a way to make the disk drive C E?

  Problem 1: Window 7 and I have fought each other and Windows 7 is to win. I am the owner, administrator and only users of my computer 7 Professional and I can't do anything that requires an admin and most of the time it excludes me everything to do. I need to use this computer, so before you take a hammer, is it possible to give me permanent permission to admin? I do too many things that require admin to play with the standard user. I have a Windows 7 Professional, Internet Explorer 9, and Google Chrome, drive C has about 120GB and 1 TB E. I don't know why the people that set up this computer for me did it but now I have to fix, because drive C is on the point of falling.

  Problem 2: My C drive was never large enough to handle what I need, the E drive but how to switch the two? I tried the file transfer and some work and some have just done battle with Windows 7 worse and more complicated. Now the system is all messed up. It will not save, it wont recover, it does not work most things because the C drive is full and no matter how many things I delete or remove the C and put on E drive C never goes back down. I am a student adult and I guess I know just enough to be dangerous, but not enough to make a difference but how am I supposed to learn if I don't try?

  Unfortunately, your two statements are incompatible:

  • Now the system is all messed up. I tried to correct things, but there are still so many problems.
  • I really want to start from scratch.

  Your chances of fixing your problems are close to zero.
  The chances of an expert of your fixing problems are slightly higher, but only if let you it sit in the front of your machine and give him lots of hours trying different things.
  Since you seem to be dependent on a work machine, you must consider the following approach:
  1. Back up your data.
  2. Check your backup on another computer so that it is accessible.
  3. Perform a destructive factory restore.
  4. Reload your software.
  5. Create an image of your installation and store it on an external support.
  6. Check if the image is usable.
  7. Wait until the dust has settled (two to four weeks), and then create another image.
  8. Create a new image, once every six months.
  9. Always keep two more recent images.

  Many people skip the stages 2, 5, 6, 7, 8 and 9. Are absolutely essential for a robust installation that needs a quick recovery path. Skip the following steps allows you to save a bit of time at the start but cause a lot of grief later.

• What app do I need to make a movie and change the sound of the film? Thank you Michael

  What app do I need to make a movie and change the sound of the film? Thank you Michael

  Please check the first Pro CC 2015.

• Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX?

  Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX? Just passed from the CS6 in the CC, and it is very difficult to see when they are in fact seen visible.

  Apart from excellent advice from Terri, there is no way to really change how the paths appear - nevermind, I could use those more visible as well.