What is ctr/pass_setup_1_7 Win32 Cabinet Self extractor
just that! nothing more... simple question.
Hello
1. what exactly is the problem you are having with the firm Win32 Extractor?
2. do you get an error message? If Yes, what is the exact error message?
On Win32 Cabinet Extractor:
The Windows .cab files contains files that install the program. Because they are compressed files, you cannot use the contents of these files without checking out them from the CAB file.
Because the contents of cabinet files is normally inaccessible, the Extractor is a program used to remove these files, you can use them.
Whenever you use your computer; There is a risk that one of the Windows files can be damaged, either by a virus or a hardware failure. The extractor of the Cabinet allows you to recover a single file to replace the one damaged without having to reinstall Windows from scratch.
Tags: Windows
Similar Questions
-
December 14, my computer started to have the blue screen of death. I had downloaded porn movies and reg (I'm single :-)). I didn't know I was asking REALLY bad things that can happen to my computer. I could get in on safe mode and download superspyware, malware, optimizers, and memory settings. I now can open Windows XP, but only for a few minutes before the CRASH produced big timeownload title and wanted to d! I sand wa to download from my USB (recorded here until knew more...), but try it gives me a msg "unable to operate as an external device doesn't work does not correctly. Can you helpme download or have the best advice for a solution to my problem of computer - memory and several start-up/corrupted files I am sure. Always get the msgs. «the memory could not be read...» ».
Hello
The issue seems to be caused by a Virus/Malware.
I suggest that you download and install a complete analysis of the system using the Microsoft Standalone System Sweeper Beta.
Microsoft Standalone System Sweeper is a recovery tool that can help you start an infected PC and perform offline analysis to help identify and remove rootkits and other malicious software developed
To download the Microsoft Standalone System Sweeper click on the link below
-
Error code 40 unable to unzip file with MS self extractor
Try to use self extractor to run the fix, but get the 40 error code
Hello
1. what patch you are trying to install?
2. What is the number\article of the fix knowledge base?You may have a corrupt hotfix package or may have downloaded the wrong fix for your operating system platform. You must make sure that the hotfix you download is X 64 (64 bit) and not a 32-bit (X 86) as you're running vista 64-bit operating system.
Please see if you can copy the file downloaded to another computer and try to unpack. Or try to download another package and see if you can decompress this file.
Kind regards
Afzal Taher
Microsoft technical support engineer -
Hi, I use windows vista and erase something and I can not install programs of see the internet.it with winzip Self-extractor header corupt.also during the instalation error it can not find file c/user /? / App
Hello
1. in the place where you try to download this file?
2. you are trying to download the zip file?
3. this happens with all files or any specific file?
Switch error header corrupt is due to corrupt Self extractors (and corrupted, and .zip files) that were introduced in the file during the download.
Normally, the download of the new file solves the problem. If, however, repeated attempts to download the file do not result in a good copy, your computer may be infected by a virus
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
-
What does the "AUTO" in PARALLEL (self)?
What does the "AUTO" in PARALLEL (self)? I know what is the PARALLEL indicator. Usually, you either would not include something in parentheses after the suspicion or would you include a number in order to establish the statement of principles. What happens when you use AUTO instead of a number for the declaration of principles? I can't find an online article that explains this.
Thank you.
"
PARALLEL
(AUTO
): The database calculates the degree of parallelism that can be 1 or greater." If the calculated degree of parallelism is 1, then the statement runs in the series. » -
VMware vSphere: what's new in vSphere 4; Self-Paced
I take a VMware Infrastructure 3 environment: install and configure V3.5. Can I take the VMware vSphere: what's new in vSphere 4; Self-Paced or should it be instructor?
If you're not a VCP3, but attended one of the sine qua non
classes (VI3: install and configure;) VI3: Secure deployment &
Analyze; or VI3: Fast Track).Take and pass the exam of VCP3 OR attend the VMware vSphere4: what's new course.
Take and pass the VCP4 exam.
Self-paced course is not enough, the new class with instructor is the only class that meets this requirement.
It was announced last week that the VCP3 exam will remain available until the end of March 2010 and the last day VMware have deferred the date limit for holders of VCP3 obtain the VCP4 without having to attend a vSphere instructor course - you now have until the end of January 2010.
Scott.
-
-
What is a Trojan: win32 / alureon, FV and how manually delete it please
I ran microsoft security scanner, and he partially removed this virus, but also said that it should be deleted manually, help please
Hello
This should help you to remove it.
"How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?"
http://support.Kaspersky.com/FAQ/?QID=208280684
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Also use this method to remove the malware.
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
I can not get my web cam to work at the all.why is this.can I do something.
Hello
Reboot - and you may need to use the clean boot method to determine what type of program
is the locking of the camera. Often, it is a program of e-mail or something like Skype
which is not to release the camera when closed or still running in the background.How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx-----------------------------------------------------------------------------------------------------------------------
You may need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
-
Fix KB981013 self extractor PW invalid
I ask hoftix to KB981013 Vista Ultimate x 64 SP2
I used this fix in the past without problems. (16/11/2010)
I downloaded the file several times and even tried 3rd party extraction tool (7zip)
but the password provided is invalid.To test other factors, I asked win7/2008 fix for 981013, he extracted fine, but of course will not be installed.
The KB Article number: 981013
Language: All (Global)
Platform: x 64
Location: (http://hotfixv4.microsoft.com/Windows%20Vista/sp3/Fix307913/6000/free/408817_intl_x64_zip.exe)
Password: DMpFkcRHThank you
-Sean
Hi zampaz,
The hotfix password expires within a very short time, you will need to send another request for the hotfix and check if it works.
For more assistance, you can contact Microsoft by phone.
How and when to contact Microsoft and support Customer Service
http://support.Microsoft.com/kb/295539
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Outlook Express will launch is no longer from the desktop. Tried to download a file to re install outlook express but error indicating that a later version of Microsoft Explorer is installed.
Is there a file with Outlook Express and the appropriate version of the Explorer on which can be downloaded.
Do I have to uninstall Explorer 8, I'm sure I do, and I would then be able to use the file? I have download a file called ie6setupOe that has been 492 kb that I thought was Outlook Express. It is a .exe Win32 Cabinet Self Extractor file
I'm on the wrong track thinking?
Larry
* original title - trying to re install Outlook Express__ *.
Bruce; Thanks for all the advice and be so useful. Now we have all this work and has not lost a large part of all that we could not re create. Larry. I voted and I hope he did publish.
-
MBAM db 1820: F/P Wextract.exe as Trojan.Vundo
c:\windows\system32\wextract.exe (Win32 Cabinet Self-Extractor, by Microsoft) is to be mistakenly detected as Trojan.Vundo. do * NOT * remove it.
I was about to report it, but I see that many others have beaten me to the MBAM forum:
http://www.Malwarebytes.org/forums/index.php?showtopic=11639
http://www.Malwarebytes.org/forums/index.php?showtopic=12129
taken longer than usual... we used to "instant" MBAM patches...
but it's been fixed with database version 1821
-
I am looking for office 2000 sr1a.
I am able to download the file from this Url. But when I run it, it has been unable to download the basic components. I even tried adminitrative put up-to-date, but that also failed.
One of my clients is old application depends on office 2000 SP3 auto answer to users. Until I have install sr1a is not allow me to install updates to rest.
Please give me the link entirely feasible to download the full package on sr1a. I'm totally stuck until I get this update.
Best regards, MCSE 2003 Andy.Inhttp://support.Microsoft.com/kb/245025
"How to get and install the updated Office 2000 SR-1/SR-1 a"
This download is the Extractor(166KB) for she, that will download/upgrade components. .
You download the extractor, open and run it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I still have the original Extractor, and it's 165KBsIt's a Win 32 Cabinet Self Extractor
File version: 1.71.1015.0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Office 2000 Service Release 1 (SR - 1a)
Office 2000 SR-1 provides important updates to Office 2000 in one place. Microsoft recommends that all Office 2000 upgrade to Office 2000 SR - 1 for clients to receive the latest updates and optimal benefits.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If no luck here, try the Office discussion groups:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
See you soon.
Mick Murphy - Microsoft partner
-
I can't connect to my server SMTP with TLS on port (send 465 or 587 / 995 receive) using Thunderbird 31.3 or my OS X 10.10.1 24.6 (Didier) MacBook Pro.
However, I am able to send and receive mail from the same account on my Windows 7 machine using Outlook 2007, using the same settings I configured in Thunderbird. I added the certificate etc.
http://img.Photobucket.com/albums/v631/Napoleon_BlownApart/ScreenShot2014-12-16at121323pm.PNG (Taken when using 24.6)
I am the admin of the server and the password and other settings on the side Server are correct! (I'll take a look at the evolution at the same time. I am already back to an earlier version of Firefox because of sloppy coding and broken features).
Any ideas?
If the server name is a secret, how you expect to receive mail. Please, we have pretty bad without guessing. Seriously what you are done using a self signed certificate, they are free by https://www.startssl.com/
My guess is it of OSX who dislikes the self-signed certificate, how Thunderbird to deal with Windows. As you have a copy install Thunderbird and see if it is a question of OSX.
-
When I click on install to itunes, it goes very well until it will try to install it and then I get a weird error that the basis of this message is a win32 error. Then so I ignore this and itunes is able to be installed, but when I click on itunes, I get an Apple Application Support not found message! Eeek help someone!
Hello
1. What is the version of Windows installed on your computer? For example, Windows 7, Vista.
2. have you done any software or hardware changes on your computer before this problem?3. What is the full win32 error message you get when installing itunes?4 is specific to the program the issue?
Since we don't know the version of Windows installed on your computer, you can read the following general steps.
I suggest you to bring to the version of Windows installed on your computer so that we can better help you.
To work on the issue, refer to these methods.
Method 1:
Run the fixit from the link:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_UninstallMethod 2:
Refer to the steps from the link.Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926NOTE: after you complete the steps suggested in the section (4) Disabling other incompatible software), you must start the computer in normal mode using these steps.For the Windows XP computer:a. from the Start menu, click run. A run (command prompt) window appears.
b. type msconfig in the Open field , and then click OK. The utility of Configuration system opens.
c. click on the tab general.
d. Select the 'Normal startup' option.
e. restart the computer.For Windows 7/Vista:a. from the Start menu, click all programs click Accessories.
b. click run. A run (command prompt) window appears.
c. type msconfig in the Open field , and then click OK.
d. If Windows needs your permission to continue, click on continue. The utility of Configuration system opens.
e. click the general tab.
f. Select the 'Normal startup' option.
g. restart the computer.In addition, you can also ask your question in the Apple discussion forums.
https://discussions.Apple.com/community/iTunes
Hope the information is useful.
-
I have my screen somehow super-sized (all grown) and I get it do normal - what I do?
I hit the button somehow and? don't know what else and the supersized TI-self screen. It's as if I hit the script enlarge for the hard drive to see and don't know how to get back to normal. I am working on a Toshiba Satellite A135-S4407.
1. set again the screen resolution
http://www.Vistax64.com/tutorials/84291-screen-resolution.html
2. set DPI scale
http://www.Vistax64.com/tutorials/84233-DPI-scaling.html
3. do a system restore, if possible.
If you remember a date at which the screen was ok, and if it's in the list of restore points, do a system restore and choose this date or before as your restore point.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Maybe you are looking for
-
I need to reinstall my operating system to windows 7. Firefox works fine. All I need is a procedure to save the configuration of Firefox and bookmarks to facilitate the configuration process when I re - install Firefox later. Thank you
-
I'm trying to decide between two iMacs, costs are roughly equal: 27 "iMac3.2 quad core i5 16 GB 1867 MHz DDR3 SDRAM AMD Radeon R9 M380 with 2 GB of video memory OR 21.5 "iMac i7 QuadCore 3.3 16 GB 1867 MHz LPDDR3 Intel Pro Iris 6200 graphics card Ref
-
I was unable to run examples or software by using all of the IMAQ USB files. I tried to repair my installation of IMAQdx and always get the same thing. When the file is loaded, my computer search IMAQ USB Grab acquire and can't find it. I want to use
-
Crash of LabVIEW with nodes of Boolean property
I work with a set of Boolean buttons and when I call a node property for the button and try to set the class for the reference entry in a script of NI845X I2C or configuring LabVIEW 8.0 give me a tile of error indicating that: LabVIEW .exe has incoun
-
Power surge merged data Works in Word files.
How can I restore the text files & Works in their respective places? Thank you