What is Java (tm) runtime environment 6 update 7

Similar Questions

• Sun Java Runtime Environment 6 Update 18

  Sun Java Runtime Environment 6 Update 18

  Sun Java Runtime Environment 6 Update 18
  JRE 6 Update 18
  The JRE is required to run applets and Java and JavaFX applications. This special release provides key fixes a few

  http://Java.Sun.com/javase/downloads/index.jsp

  Wilders Security Admin

  
  This version of the feature does contain all new fixes for security vulnerabilities to its previous version, Java SE 6 Update 17. Users of Java SE 6 Update 17 are the latest security patches and do not need to upgrade to this version is current on security patches. [emphasis]
  
  Source: http://java.sun.com/javase/6/webnotes/6u18.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to uninstall Java 2 Runtime Environment, SE v 1.4.1_01 who not listed in Add / Remove programs?

  I need to uninstall Java 2 Runtime Environtment, SE v1.4.1_01, which is detected by Java, but is not listed in the window add / remove programs. I already followed all the instructions given by Java, but I could not find the registry after running regedit HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/uninstall.

  Thanks in advance!

  Hi Alvaro_900,
   
  -Which is the key that you can't find?
   
  You can find the uninstaller for Java folder in the C:\Program Files\InstallShield Installation Information folder.
   
  Try to uninstall it from there and check.
   
  For more information, see:
  After uninstalling Java, how to remove its entry in Add/Remove programs?

• How can I uninstall the old version of java 2 runtime environment (H.E. v1.4.2) when it is not listed in the Add/Remove Programs section in the control panel

  Java shows that I have an old version of Java installed.  I can't see to find this version anywhere.  I can't remove it, if I can't find it.  I looked in the Control Panel, under Java and everywhere else I could think of.  I removed something with the hotfix from microsoft, it shows the old version as Java installed on my computer.  Help!

  Try my computer, search, chk the box to search for files, search for downstairs,

  more options, chk boxes, search for system files, hidden files, etc. We could

  In addition, open C:, file open windows, scroll to the folder.

• How can I remove J2SE Runtime Environment 5.0 update 11. Application of transformation error when you use Add/Remove programs

  Cannot remove J2SE Runtime Environment 5.0 update 11 or Java or Java 2 Runtime Environment SEv1.4.2_6.

  Add/Remove Programs DOES NOT WORK.  Message received when you try to remove programs is, "error application of transformations".

  Java (TM) 6 Update 21 is installed on my computer.

  Please let know us the step by step procedure to remove the old Java programs.  Thank you.

  E-mail address is removed from the privacy *.

  use revo uninstaller

• steps to update of application in the development environment runtime environment

  Hello

  I have APEX 4.2.6 development environment and same version runtime environment.  There is little change, which happened in the forms and the underlying objects in the DB (developing approx.).  Help me please in the list of the steps needed to apply these changes to the runtime approx.  To my knowledge, I should 1st sync DB objects and then take application export development and import at run time.

  Can you let me know how to synchronize objects DB?  Dump export and import is not possible because "runtime" environment has the most recent data changes.  Otherway is to make changes to the DB object individually and manually.  Is it possible that this can be done using scripts/tools?

  And what about import application?  Is it just connect to the 'runtime' DVRs. SQLPLUS and run @f110.sql?  Please let me know the exact steps.

  Thank you and best regards,

  -Anand

  Hi anand_gp,

  You mean (for the import of application), I need to execute all the steps below to update the existing application (get the workspace ID, approx. set ID, etc.,)?

  And thank you to provide links on how to modify objects in the DB.  I'll go through them.

  Yes, and it will create a new application in your workspace.

  If you want to have the same id of the application (whether it is your production application), you can delete the existing application using APEX_INSTANCE_ADMIN. REMOVE_APPLICATION (remember to commit after each step) and then import with above in the light of the steps.

  If you want to have both the old and the new application in your production work space, you can use the alias of the application while publishing the URL.

  When you deploy a new version of the application, simply change the alias of the application, so that it becomes your current application.

  I hope this helps!

  Kind regards

  Kiran

• Error initializing Java Runtime Environment.  You may need to reinstall Flash.

  ... It's really annoying.

  I work with adobe cs5. Recently, it started to not work. I have to restart again and again so that it can compile a swf properly. I'm trying so cs5.5. I get this error "error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  So im like OK... This is useful...

  -Reinstall flash-

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  -Reinstall java-

  -Reinstall flash-

  -Reinstall adobe flash cs5.5-

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  -google-

  If I came across this post. Follow it exactly.

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  I have change the thing in the file to Xmx1024M

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  Just on the forums.

  What should I do now?

  I found a solution that works for me.

  Just delete the file jvm.ini under the location of the temporary folder. In windows, it would be under path.

  C:\Users\USERNAME\AppData\Local\Adobe\FLASH_VERSION\en_US\Configuration\ActionScript 3.0

  For example. C:\Users\admin\AppData\Local\Adobe\Flash CS6\en_US\Configuration\ActionScript 3.0

  As soon as you start the Flash, a defult jvm.ini will be created automatically, in this place and your flash works fine.

  Acutally the error comes because of the jvm.ini of corroupt file (cause too great values > 256 error displayed.) For example. Xmx1024m) that is created in setting up temporary forlders automatically during the Installation of Flash.

  Whenever Flash begins his search the file jvm.ini and let the maximum memory of initalized at FMV.

• I recently did a system update and installed Yosemite on my Mac. Now I can't open CS5 at all. I get the error message is the following: "to open Adobe Photoshop CS5.1, you must install Java SE runtime inheritance 6. I tried to download this and it still

  I recently did a system update and installed Yosemite on my Mac. Now I can't open CS5 at all. I get the error message is the following: "to open Adobe Photoshop CS5.1, you must install Java SE runtime inheritance 6. I tried to download this and it still gives me the same mess

  Try to install JRE from

  Java for OS X 2014-001

  Then fire and control

• Runtime environment java error

  Hello

  I create a virtual keyboard for English and Tamil with backend process.
  I created virtual keyboard using custom component tat.

  I used this customcomponent (vkey.mxml) in main.mxml file

  I create the build.xml ant file.

  that day, he successfully built.

  If I change any line or something I create once more.

  that day, I got on hs_err_pid5032.log containing

  A fatal error has been detected by the Java runtime environment.

  32756 byte for chunkpool jav.lang.outofMemoryError:requested: allocated. out of swap space?

  This is the error
  How do I rectify this error.
  If I build one more time the flashbuilder 4 and the eclipse plugin application terminated.

  
  concerning

  Athi

  Oh OK! It seems to be a fairly small project only.

  The - Xmx worked? Your problem is solved?

  Baker V

• Application upgrade to sqlplus in the "Runtime environment".

  Hello
  
  We have a production server to top "Runtime environment" installed 4.0.2. It wasn't a problem to import our application for the first time in SQLplus by running the sql export script. But when we try to update already installed the application in SQLplus with a new version, we get an error:
  
  SQL > @c:\f101.sql;
  REQUEST 101 - test.xxx
  Set credentials...
  Check the compatibility...
  Last API extended: 20100513
  Your current Version: 20100513
  This import is compatible with the version: 20100513
  COMPATIBLE (you should be able to perform this import without problem).
  Set Application ID...
  Start
  *
  ERROR on line 1:
  ORA-20001: 101 Application has not been deleted. Import will not be attempted.
  ORA-06512: at "APEX_040000.WWV_FLOW_API", line 327
  ORA-06512: at line 4 level
  
  How we solve this problem?
  
  NOTE:
  (1) We MUST import the application with the same app ID,
  (2) we cannot use SQL Developer or Web management interface (this is installation of Runtime Environment) - the SQLplus is one option
  
  Many thanks in advance,
  Alexander

  OK, nevermind, I think I know what the problem is. I tried it in the sql workshop and that's why it worked for me.

  To do it (with the name of your workspace):

  DECLARE
  l_ws NUMBER: = apex_util.find_security_group_id('NAMEOFYOURWORKSPACE');
  BEGIN
  wwv_flow_api.set_security_group_id (l_ws);
  wwv_flow_api.remove_flow (101);
  END;

• Front view without installing runtime environment remote

  Hi all

  I have a question about the LabView software.

  I am currently using LabView 2014 to develop applications that the user can access distance front panels (from the executable applications).

  In view of the concerns of the customers IT department, now I'm looking for a way to provide access to applications without having to install the runtime environment.

  I found some documents about this issue, but there is only a mention of the internet plugins explorer (which is not enough to display the Panel before correcly).

  What is necessary for the execution of the façade remotely within a window of internet explore?

  Best wishes

  Andrei

  Remote façade panels requires both the plugin for the browser you are using and also require the appropriate version of the LabVIEW run-time engine.

  You can have a look at the WebSockets link in my signature - we had a lot of success to create signs at base of remote web for our software using WebSockets. There is a presentation and an example here: https://decibel.ni.com/content/docs/DOC-41778. With the help of my library allows you to create your own UI using html/css/javascript and communicate with a LabVIEW application.

  You should also check out LabSocket - this is a replacement for the outside from facades of WebSockets so it should save you having to create the user interface yourself, because it uses the front panel of your VI.

• IBM Java 6 Runtime got removed, now the Manager of EKM encryption won't work.

  We use a TL2000 Dell for backups.  In a safety audit, it was noted that we had what we call the 'IBM Java 6 runtime' installed on our backup server, and it has been deleted without that person do you wonder what he has done.

  What he did was run responsible EKM encryption the TL2000 and now it won't load at all. .  Looking at the 'LaunchEKMGui.bat' file shows that it references the path where these runtimes used to be.  I tried to find a download for this particular flavor of Java without success.  I downloaded the iso of the encryption Manager, but I'm rather perplexed.  I was hoping that there is a section "install the IBM Java 6" or "Repair Installation" option, but no luck.  I'm just the junior admin net and my boss and I have been at this company for less than a year after a major overhaul, so we try to understand the network as soon as possible with little documentation.

  I also tried to change the LaunchEKMGui.bat to refer to a different path for Java, but that did not work.

  My questions are the following:

  (1) is there a way to get this IBM Java Runtime, without having to reinstall the full encryption Manager?

  (2) is there a CLI that I could use to start the server for encryption?

  We'll be moving away from backups on tape in the very near future - certainly before the end of the year and eventually, at the end of the month - but now I would like to strongly get the encryption running server and we are not totally out in the water on the backups.

  Any advice would be greatly appreciated.

  Bryan

  Hello Bryan,

  Given that you are missing the java runtime, you can try to install just that from the iso file for EKM. I've seen sometimes that he can work & difficulty of the question, but most of the time that a reinstallation is necessary. Here is a link for the ISO & the EKM installation guide.

  ISO EKM

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerVault-TL2000?driverId=7CMM7&osCode=WX64&FILEID=3281571878&LanguageCode=en&CategoryID=Ta

  EKM installation guide

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/PowerVault-tl2000_Setup%20Guide_en-us.PDF

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/PowerVault-tl2000_Reference%20Guide5_en-us.PDF

  Please let us know if you have any other questions.

• Management of an APEX with walk-APIs - it APEX runtime environment?

  People,
  
  APEX Version: 4.2.1
  Database EE 11 GR 2
  Listener: EPG
  
  TLDR: Go at the end of the question for this thread in bold.
  
  I work in an environment where we have maintained by Oracle Forms applications and Oracle APEX on a database only internal production data. We want to take a redacted together these data (PII or personal Identifiable Information removal) and some applications of the APEX and put them on a separate external server for public consumption. The internal production environment is running APEX with the runtime and development environments. The external server runs APEX with just the execution with the query, only the applications environment. While two of the external applications are public applications without authentication (both work very well), there is an application that will have a relatively small number of users who authenticate with the application to access more detailed information than the general public. Still no PII or something like that, a little more information. Users are users of workspace APEX. The three applications are in the same workspace.
  
  I have to assume that I'm not the only person with the above configuration, but I had a moment difficult to work right. Although the documentation does not have the API, it is not always clear which API you would use and why.
  
  For example, in the internal production environment when a user connects to the authenticated application, they get access to the application (if they are in the right group) or they get an error page indicating that they have no access to the application. In the external runtime application that they will always have a ' ORA-06550: line 4, column 55: PLS-00201: identifier ' WWV_FLOW_F4000_PLUGINS.» ' INTERNAL_4155_SESSION_SENTRY' must be declared ORA-06550: line 4, column 1: PL/SQL: statement ignored ' error, which "sort of" makes sense because the application referenced (4155) is part of the installation of development and is not included as part of the runtime install only (either by the way, this seems like a bit of an oversight on the part of the APEX team). It is pretty obvious that the export and import of the workspace (and its users) 'something' got zero and some type of password reset is requested. Of course, end-user password reset request is not included in a single installation of runtime...
  
  So, off to the API to see if I can "reset" on the single runtime installation external users so that they do not have to reset their passwords when first connecting. Wow... Lots and lots of API. Understand that you must set the security with the APEX_UTIL group id. SET_SECURITY_GROUP_ID API takes some time. After much wandering around, I settled on the apex_util API and the WWV_FLOW_USERS view as a good place to study...
  
  However, when we query the view WWV_FLOW_USERS on each side, all of the columns "expected" that one would expect because of this behavior are identical between the installation of development / internal enforcement and the only external runtime installation. Things like CHANGE_PASSWORD_ON_FIRST_USE and FIRST_PASSWORD_USE_OCCURRED are identical (and btw, not the values that you expect them to be... FIRST_PASSWORD_USE_OCCURRED is N for all users except the user ADMIN). The only values that differ between the two environments are as CREATED_BY, CREATION_DATE, LAST_UPDATED_DATE, and LAST_UPDATED_BY columns.
  
  Things that work just great:
  
  < li > the installation itself! Very easy to move backward between each environment (runtime only or runtime and development).
  < Li > integration with SQL/Developer is fantastic. It is very cool to be able to right-click on an application in the internal environment and deploy it to the unique runtime environment. Ideally, it would be nice to be able to move workspaces APEX in the same way.
  
  Things that do not seem to be large:
  
  < Li > when that documentation tells you what each API, it doesn't tell you why you want to use it, or what you would use it for. Having a section "useful use case" in the documentation would be great. Yes, there is the example of code (which of course does not mention that you need to set the id of Group of security for most of them to work), but the code example is not really tell you why and what each of the attributes you can set with her (for the API set for example) will actually... For example the documentation does not really that many fields are not yet used, and even if the values are the exact opposite of what you would think they would be.
  
  So, my immediate question:
  
  What API will allow me to have users exported with a workspace to use applications that are authenticated in a single installation of runtime?
  
  And my follow-up question (s):
  
  You can actually use the API defined to manage a runtime environment and is at - it a good resource that explains the how and why rather than just the choice of the API.

  Well, after a lot of trying things, I finally had things to work.

  It seems that export and import a workspace "expires" users to your workspace. Despite the fact that, in the development environment / the ACCOUNT_EXPIRY (which is a date) has a whole bunch of different values and seems to work perfectly, when you import a workspace that the ACCOUNT_EXPIRY column is ready on the date you did import previous internal enforcement. For some reason, this is an indication that your account has expired at the time when you look at the WWV_FLOW_USERS table. Not one of the columns expected, but on the contrary this date column...

  So let's take a look at the [url http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_util.htm#autoId126]Unexpire account of the workspace of the documentation procedure:]

  UNEXPIRE_WORKSPACE_ACCOUNT Procedure
  
  Unexpires developer and workspace administrator accounts and the associated passwords, enabling the developer or administrator to log in to a workspace.
  
  Syntax
  
  APEX_UTIL.UNEXPIRE_WORKSPACE_ACCOUNT (
      p_user_name IN VARCHAR2);
  
  Parameters
  
  Table 21-107 describes the parameters available in the UNEXPIRE_WORKSPACE_ACCOUNT procedure.
  
  Table 21-107 UNEXPIRE_WORKSPACE_ACCOUNT Parameters
  Parameter           Description
  
  p_user_name  The user name of the user account
  
  Example
  
  The following example shows how to use the UNEXPIRE_WORKSPACE_ACCOUNT procedure. Use this procedure to renew (unexpire) an Application Express workspace administrator account in the current workspace. This action specifically renews the account for use by developers or administrators to login to a workspace and may also renew the account for its use by end users to authenticate to developed applications.
  
  This procedure must be run by a user having administration privileges in the current workspace.
  
  BEGIN
      FOR c1 IN (select user_name from wwv_flow_users) loop
          APEX_UTIL.UNEXPIRE_WORKSPACE_ACCOUNT(p_user_name => c1.user_name);
          htp.p('Workspace Account:'||c1.user_name||' is now valid.');
      END LOOP;
  END;   
  
  See Also:
  "EXPIRE_WORKSPACE_ACCOUNT Procedure" and "WORKSPACE_ACCOUNT_DAYS_LEFT Function"
  

  It's very nice and all, but there are some things missing in the example above:

  (1) you must call the procedure of apex_util.set_security_group_id with the ID of the workspace you want to unexpire accounts.
  (2) you will need to issue a COMMIT for steps to engage the unexpire.

  Question: How are you supposed to know you need to do the above two steps?

  Take a look at what the API documentation has for the description of the SET_SECURITY_GROUP_ID procedure:

  SET_SECURITY_GROUP_ID Procedure
  Use this procedure with apex_util.find_security_group_id to ease the use of the mail package in batch mode. This procedure is especially useful when a schema is associated with more than one workspace. For example, you might want to create a procedure that is run by a nightly job to email all outstanding tasks.
  

  Note that there is no mention that you will need to call the SET_SECURITY_GROUP_ID procedure for almost all other API calls in the APEX_UTIL package (or at least many of them)...

• What is Java?

  Java (jucheck.exe) is a program valid and if yes what will do to my pc?

  http://www.Google.com/#hl=en&sugexp=Les%3B&gs_rn=2&gs_ri=HP&CP=11&gs_id=w&XHR=t&q=what+is+Java&es_nrs=true&PF=p&TBO=d&output=search&sclient=psy-AB&OQ=what+is+jav&gs_l=&PBX=1&BAV=on.2, or.r_gc.r_pw.r_qf. & bvm = bv.41867550, d.b2I & fp = 2575ec57dfce1a42 & biw = 1024 & bih = 557

  This is the page of google search for what is Java, you can read the selections and they will answer your questions.

  Also can you please tell us how you were referred to this forum, as for the non-technical subjects. Thank you.

• What should I do if after an update is installed something no longer works?

  What should I do if after an update is installed something no longer works?

  Hi JohnEvrard,

  It depends on the update and the program that was hit.

  To find out what update is causing the problem note the installed updates. You can perform the system restore and restore the system to the date that the program worked very well.

  Once the restore is complete, install the standalone product of each update and check if the problem occurs in the program.

  System Restore: frequently asked questions:http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  I see you have another post in which you mentioned Windows Live mail orthographic corrector does not work after update.

  If the query in this post is in regards to Windows Live mail, I suggest you follow the steps provided by PA Bear for better assistance.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.