What is Linux?

Similar Questions

• What distro Linux with Satellite A200-10W

  What linux distro for use with my laptop A200-10W, which works out of the box (with Nvidia 7300go, wifi and Blootooth)?

  PS. Anyone have experiences with FC8?

  Thank you for luka

  HM, it's hard to say that EACH linux works out of the box. I'll try Ubuntu (the latest version is something with 7. XX) that runs on a Tecra S3 at my home. Some things don't work (sensor for fingerprints, etc.) but most of the stuff (the material) works perfectly Yes, it s upwards will work you system.

  Download from ubuntu.com and start a live CD. You will see how the live CD manages your system, but I think it should work.
  I suggest you to register on some ubuntu forums... you will need. :)

  Welcome them

• Installation of linux on Qosmio G20

  Has anyone managed to do this? If for what flavor linux has been used or that drivers were used for hard drives?

  Hello nagimirza

  Please check the Linux operating system on this forum area. There are several topics on the same theme. Maybe you will find something interesting for you. ;)

  Good bye

• A few questions using Linux on Satellite L30-10 x

  Sorry to bother you people, but I had this satellite L30-10 portable x.

  I try to make it work with my o/s preference, what is Linux (or any unix-based), for which the goal, I need to know what's what in there, IE.

  1. how chip works for the compatible softmodem V. 90 - 92?

  2. What is happening with everything that controls usb ports?

  I found a live-cd that makes the USB ports of the work, which is the work of disks usb-Clerkship on them, so I'll solve this one thanks to study how it does, and 2 of the 3 live-cd I used seems to have the graphics (up to new problems when I try for different resolutions..)
  but that leaves the question of the modem.

  I haven't tried something more, like the WiFi network, pc-card (I hope that ethernet works... it is usually without much trouble).

  There is also a good question on the cd/dvd drive, that is, it is declared as a "super multi" one (whatever that means) and a 'double layer' one and nobody promised anything about burning DVDs with it (the seller certainly didn't), but the docs online here @ toshiba - Europe.com say about the L30 series it is supposed to be able to burn 8 , 5 GB, so it it true finally on the specific cd/dvd driver 10 x model or what?

  I understand that many people would disagree with the use of linux on a machine designed for a specific software company,
  but I still believe that the manufacturer of this product (the satellite laptop L30-10 x) should tell customers what's in it, period.

  In short, if you can not help with my questions above, please tell the best, you know who I should ask, which is supposed to be responsible for what is in this anywhay for laptop, a mailing address or e-mail, something to try for more information.

  Thanks in advance,

  Olgamari

  Hi Olgamari

  See this section of Linux using search option. Maybe you will find some useful information. Otherwise, you can follow pages:
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html
  http://www.Linux-laptop.NET/Toshiba.html

  Bye and good luck!

• Question about linux on a toshiba laptop

  Hello. I have a question; I'm going to buy a computer toshiba laptop, but I need to install fedora linux for my work. My question is
  should which model I buy to be able to install this linux by myself? I thought about Toshiba A200 - 1 MB or A100-786. What other linux can be installed on Toshiba A200 - 1 MB, A100-786. You may know if power is working correctly?

  Elder Hello

  In recent days, nobody writes here and I just want to write a few words. As you probably know that Linux is not supported by Toshiba and with Linux, you're on your own. Please if you have time check out this Linux section. You will find many interesting topics and I hope some information about Linux on the laptop A100 and A200 model.

  You can also visit these interesting pages of Linux:
  http://newsletter.toshiba-tro.de/main/index.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  Bye and good luck!

• Linux (Slackware 13.1) on the Toshiba Satellite C660D - 10 p

  Hi guys. I want to buy the laptop shown in the topic, but I first wanted to ask if anyone had any experience with Linux on it and maybe even with distribution Slackware 13.1. Is it portable and compatible linux? Another issue is whether someone has a link to Toshiba's official information on this laptop. I could not find it in the session of products from the Web site. There is no such model - ' C660D - 10 p. However, I have the printed sheet "Technical Details" of her saddle (store), but there is no info on the chipset and the specifically-wireless interface model

  Any time the worksheet says:
  CPU: AMD Athlon II P340 (2.20 Ghz)
  Physical memory: 4096 MB DDR3 (1066 Mhz)
  Graphics card: Radeon HD 4250
  HARD drive: 320 GB

  Webcam, mic, wlan, lan, vga, card reader, usb

  To summarize:
  T1) do you think Slackware and cell phone are compatible?
  Q2) where is the official information of the Toshiba on this model?

  ---
  Thx a lot.

  Laptops are specific products of these countries and if this laptop model is offered in your country simply check out the official page of Toshiba.

  What about Linux?
  As you probably know he is not officially supported by Toshiba so until you wait here check the Linux section on this forum or try to visit some of the Linux forums. There you can often find about Linux on laptops different reports including different Toshiba laptops.

• Satellite M40X 185 linux live cd, noise and temperature

  Hello

  I just bought a satellite M40X-185. I flashed the bios with success of 1.30 to 1.60. Windows XP home (preinstalled) works perfectly. I found three questions:
  1. when I try to boot from a cd live linux (suse 9.3 dvd, knoppix 3.9 or mandrake move) the system hangs. Any idea of this behavior? With knoppix, it seems to hang while loading driver cardmgr. So I thought it was a problem with the linux cardbus but ultimately suse live driver dvd 9.3 has succedded in load correctly if I disable acpi (command-line ACPI = off). TR is the problem related to M40X material and/or bios version or is it related to linux (the kernel version maybe?). Thank you

  2. it seems to me that coolig system is much more noisy when I use the toshiba power management. If I use win XP default portable power management mode, the computer is much quieter!

  3. is there a way to measure temperatures of system (CPU, MB, GPU, etc...). Previously I have hade a satellite A50 and speedfan (www.almico.com) was able to measure all these parameters.

  Thank you

  Hi Sid

  I'll try to answer best I can.

  (1) maybe the system BIOS is not really what the Linux kernel expects and so stops. Please see the Linux very good page of Toshiba:
  http://newsletter.toshiba-tro.de
  Maybe you will find some tips on Highway M40 Linux ACPI.

  (2) time MS Toshiba power management and power management is supported by the profiles of school boards. Means that you can set according to your need, how the machine should act. In the Toshiba power management, you have many more opportunities than in the version of Ms. In the Toshiba module, you can choose to have machines operating in performance mode which means that it will give priority to the performance (which normally means of cooling by fan) instead of throttling of the CPU in order to limit heat production.
  You can also do the opposite - give priority to silence (fan less and less speed) for the performance.
  Of course there are some other settings as well (screen, disk HARD times sleep and so on).
  I mean, is that the module from Toshiba is probably set up for performance, which means that you get the fan noise. If you like you can set minimum performance and so less noise. It has its advantage the Toshiba module - it is far better to control of the small parameters and levels of breakdown and time. So, you are in more control of your system.
  Sorry for the long lesson - I'm the same at home and he is not popular :)

  (3) sorry - no answer here except that I don't know why anyone would want this. That's enough for me to know that the system controls all of these things by himself and goes off in case of overheating.

  BR

  Tom

• HP ENVY Phoenix 810-140ea & Linux

  Is it possible to buy the DESIRE Phoenix 810 - 140ea without pre-installed Windows and, if this is the case, what is Linux support? (I think to Ubuntu, but I'll go with anything that works distro).

  I'm not bothered if it comes with Win8 installed (it will not be on for a long time) as long as the system can run on Linux.

  OnlyTheTony, welcome to the forum.

  I can't find the model that you have demonstrated in your message.  However, I have doubts that the computer will be shipped with Linux installed.  I have not seen any of gaming machines what to do.

  I used Ubuntu for years.  I always installed on a separate disk from the original Setup.  This gave me the ability to run either OS without having any problems.  You may need to change the BIOS to disable the Secure Boot parameter.  I am not sure that Ubuntu will work with it.  You can go to www.ubuntuforums.org to see what the experts have to say about it.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Urgent: Linux VMware does not start because of corrupted library file!

  We have here an urgent problem:

  Libc.so.6 (link) file is corrupted and forcing the system unbootable plu. It is not even start in single user mode. How we start the system to fix the library file? Or are there other solutions to this problem?

  
  

  Here are some startup messages:

  .................................

  Cannot access the peripheral CV (/ dev/VolGroup00/LogVol01)

  / sbin/init: error while loading shared libraries: libc.so.6: cannot open shared object file: no such file or directory

  Kernel panic - not syncing: attempted to kill init!

  
  

  Thank you very much in advance!

  You will need a rescue disk from linux or use the Linux distribution installation disc and use the option of emergency starting to see if you can access the vm startup disk. Once you have access to the startup disk, you will need to use what ever linux resources / understandings you need to solve the problem.

  What happened to cause the error?

• Debugging in FlexBuilder for Linux

  Hi all
  
  I just installed FlexBuilder for Linux. I try to debug FlexBuilder project but cannot find a way to do it.
  
  When I try to debug the application, FlexBuilder displays the progress bar with the following message:
  "Waiting for Flash Player to connect to the debugger."
  I see this message for some time and after that the progress achieved 100% bar, I get the following message:
  Unable to connect, the session has expired.
  Ensure that:
  1. you compile your Flash application with debugging on.
  2. you run the debug version of Flash Player.
  
  How to compile the Flash application with debugging on in FlexBuilder? I am sure that I am under the debug version of Flash Player. Anyone know how to do this?
  
  Thanks in advance!
  

  vb17 wrote:
  > Hi all,
  >
  > I just installed FlexBuilder for Linux. I am trying to debug a FlexBuilder
  > the project but cannot find a way to do it.
  >
  > When I try to debug the application, FlexBuilder displays the progress bar
  > with the following message:
  > "Waiting for Flash Player to connect to the debugger."
  > I see this message for some time and after the progress bar reaches 100%, I get
  > the following message appears:
  > Cannot connect, the session has expired.
  > Make sure that:
  > 1. You have compiled your Flash application with debugging on.
  > 2. You run the debug version of Flash Player.
  >
  > How to compile the Flash application with debugging on in FlexBuilder? I am
  > sure I run the debug version of Flash Player. Anyone aware of
  > How to proceed?
  >
  > Thanks in advance!
  >
  >
  >
  Hello

  What flavor Linux OS are you running?
  What version of the browser / do you use?
  Mozilla Firefox browser is supported for Linux of FB. (Most recent will be)
  great!)
  You can configure your browser in eclipse here:
  Window-> Preferences-> General-> browser Web-> choose an external browser (so)
  you want to point to a newly installed Firefox)... Add your external
  browser, check...

  Check when you start the debugger there trying to take this browser...

  Also, let me know if you have installed the debug version of flash
  Player that came with the Installer (Install Debug version of flash
  checked the installation drive)? ...
  Check the version of flash player in your browser by accessing this URL:
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_15507

  Also check if it is a debug version...

• CVI versions and windows

  Hello

  Posted in requirements for Labwindows CVI recommended operating systems are:

  Windows Vista/XP/2000/7 Service Pack 3 or later

  1 can you put a significant detail on these operating systems with respect to the 32-bit / 64-bit? (are there any problems with these versions)

  2 is there any problem with Win XP embedded? (the specific requests of the operating system)

  3. What is Linux / Unix?

  Thank you, Kobi.

  Hello

  You can find information about the BCI / OS on the Web site Lifecycle policy NI LabWindows/CVI .

  

• TCPdump based on detection of interfaces for IDSM2

  When we deploy new IDSM2 blades in various places, we need to ensure that the interfaces of remote sensing have sufficient visibility in social safety nets. To do this, we (security group) depend on the network administrators to configure SPAN, RSPAN, VACL, etc.. Sometimes the initial Setup is done well, but when major changes are made to the switch, the SPAN/VACL config is lost due to human error. Thus, tcpdump is very necessary to ensure that SPAN/RSPAN/VACL etc. as the case may be set up correctly. Another reason I can think of is when the one-way traffic is stride detection IDSM2, not bidirectional interface.

  We can use tcpdump on devices by stopping the CIDS ' stop /etc/init.d/cids ' first. Is there a work around to run tcpdump on the IDSM2? What interface linux eth? int7 and int8 correspond to?

  Let me know, thanks.

  Try to use 'tcpdump - r' where is the name of the output file to falcondump. -r is an option "read from file" tcpdump.

  Falcondump is expected to produce a file "falcondump.pcap" by default; you would feed this file tcpdump with the - r option.

  For a detailed analysis, we use Ethereal on a different workstation.

  SC

• How Cloud control knows that "the disk is busy?

  Hi all, we are running Oracle 11r2 at work. It resides on a RHEL 5.8 Server, which runs on a San.
  
  I've recently upgraded to Oracle Cloud Control to 12 c Release 2. This is a fantastic product. It is, however, periodically reports that "peripheral disc X is busy with 100%. When I reported this to our group of Linux, they asked how Oracle knew this. This has led me in an interesting way. What command Linux is Oracle running (iostat? sar d?) to determine that a partition is busy?
  
  Thank you!

  SQL >! cat/proc/diskstats
  8-80 14896073 878483 7398142122 420553976 27833208 575248095 4824652296 2897685136 0 210245100 3318221248 sdf
  ...

  iostat and sar using the/proc file system.

  don't think that oracle does not depend on iostat and sar or any other tool, but looks like to / proc directly, because it means less dependencies and is easier to implement.

  one of the columns above is time spent doing io, btw, if it is sufficient to derive from the use of the disc. See details in iostats.txt, part of the core documentation.

  http://www.kernel.org/doc/documentation/IOSTATS.txt

  Now you can ask a question of your team of Linux: "why don't you know this?" :)

• Workstation 7.1.1 crashes with a message"fatal error VMware Workstation «»

  Hardware info: Athlon Dual Core 4850e Processor, 4 GB of ram, Audigy 2Zs

  PCI, radeon HD3650 and many else if irrelevant...

  Linux hosts: Mandriva PowerPack 2010.1 x86_64.

  Until a few days ago, everything work lika a charm (what VM - linux or Windows - I used). After an upgrade alsa library (lib64alsa2 - 1.0.23 - 2.0.1), I can't use any computer virtual: whenever vmware wks hangs with error message box saying:

  < div > VMware Workstation unrecoverable
  error: unexpected signal (vcpu-0): 6. a log file is available in
  "/ home/giovanni/vmware/Mandriva Linux 64-bit 2010.0/vmware.log. Please
  ask for support and include the contents of the log file. To collect the
  Select the data to be submitted to VMware support, help & gt; Subject and click on
  "Collect data support. You can also run the script 'vm-support' the
  Record computer directly. We will respond on the basis of your
  right support. < / div >

  And I have to kill both inadmissible msgbox the zombie process vmx to try to run other virtual machines.
  

  
  

  
  

  
  

  Indeed, the newspaper attached you will find the offender: this is an error returned by a library alsa.
  

  ...
  11:36:30.472 August 27: vcpu-0 | PIIX4: PM Resuming suspended type 0 x 0.
  11:36:30.477 27 August: vcpu-0 | < span style = "make weight:" BOLD "" > ALSA lib pcm.c:870: (snd_pcm_sw_params) params - & gt; avail_min is 0: </span > 11:36:30.478 27 August: vcpu-0 | < span style = "police-weight:" BOLD "" > Caught signal 6 - tid 16052 </span > 27 August 11:36:30.478: vcpu-0 | SIGNAL: eip 0x7fae1a7ed925 esp 0x7fae190b9598 ebp 0x7fae1a8efcad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: eax 0 x 0 ebx ecx edx 0xffffffffffffffff 0x7fff005c7eaf 0 x 6 esi 0x3eb4 edi 0x3ea9
  Aug
  27 11:36:30.478: vcpu-0 |         R8 r9 0x7fae190ba710
  0x65737341203a736d r10 0 x 8 r11 r12 0 x 3206 0x7fadaf6ee1b9 r13
  0x7fadaf6f73a0 r14 r15 0x7fae1a8efcad 0 x 937
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B9598: 0x1a7eef40 0x00007fae 0xaf6ee1b9 0x00007fad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95A8: 0x1a8f1354 0x00007fae 0x190b95d0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95B8: 0 x 00000937 0 x 00000000 0x190b96c0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95C8: 0x1a81e086 0x00007fae 00000018 0 x 0 x 00000030
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95D8: 0x190b96d0 0x00007fae 0x190b95f0 0x00007fae
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95E8: 0x1a8084e8 0x00007fae 00000030 0 x 0 x 00000030
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B95F8: 0x190b96e8 0x00007fae 0xa00159a0 0x00007fad
  11:36:30.478 August 27: vcpu-0 | SIGNAL: battery 7FAE190B9608: 0 x 00000075 0x00000000 0 x 00000075 0x00000000
  11:36:30.478 August 27: vcpu-0 | Backtrace:
  ...

  I found also some workaround solutions:

  (1) Elimination of the soundcard virtual machine configuration: the virtual machine starts OK, but no sound;

  (2) set the option "use the card his physique" in the "Edit parameters of the virtual machine - equipment - sound card" window to ' OSS: / dev/dsp ': the virtual machine starts OK, with sound.

  There is a way to have two sounds without OSS and Wks 7.1.1 emulation work?

  Hello

  I'm in charge of the ALSA library in Mandriva.

  I've updated the ALSA-lib in 2010,1 repository main/test last week. You seem to have installed this version of libalsa test and found a problem.

  Look no further, upstream validations that I took in the library contained a typo. I now took the patch followed upstream.

  I have now updated the libalsa available in main/testing 2010.1, so please update and let me know if that solves the problem.

  FWIW, if you notice a problem with the packages in the main/testing repository, you should probably first of all contact Mandriva via the bugtracker is a project upstream. The test repository is generally fine, but obviously problems pass through (in this case, I didn't test certain aspects that determine this problem for example).

  In addition, if you do want to use the main/test, it is usually best to wait the official updates are published once it has been tested by others.

  All the best, (and I hope the update fixes this problem).

  Col

• From Plaça Nova don't rede no ESX

  Preciso put uma placa nova rede em um esx 3.5 3.

  Me falaram as ele muda o nome da placa acordo com o nome slot em as ela e installed. E isso e uma what do linux.

  ISSO process? E is of truth, como CFFO pra managed o nome da rede depois Plaça?

  Julio,

  If you found this information useful, please consider giving points (correct or useful).

  Desculpa, EU havia understood Québec seria uma rede ethernet placa.

  Em relaçao a para 'ethernet' Plaça iscsi saber a identificacao (numeracao) da placa dentro ESX mantem o post of cima.

  ' Ele vai ganhar uma numeracao tipo diferente: .

  02:03.00

  02:04-00 "

  NAO, achara vmhba32 como ele e provavelmente vmhba33 em Configuration > storage adapters. (Svetila voce an anotar qual e an identificacao das percentage than are used atualmente dentro ESX sendo voce will go find essas information em Configuration > storage adapters.)

  Very, você criar um port do group dentro Vswitch tera service console da (como mostra imagem). Outra coisa e, voce liberar a tera porta 3260 none firewall ESX dentro para o iScsi trabalhar (Configuration > Security Profile).

  Agora, EU nao domino muito o assunto iscsi Vmware, mas achei o manual em sober isso that you can worm www.vmware.com/pdf/vi3.../esx.../vi3_35_25_u2_iscsi_san_cfg.pdf voce

  Espero ter helped!

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.