Satellite A200 - 1 M 8 System suddenly stops

Hi all

When I'm using my Satellite A200 - 1 M 8 suddenly it stop working and keep the screen but nothing move it and the system stop working.

Also a few times it closed and when I try to start it again it refuse to start, it shows me that the device is on but the screen wont open and I can't seem to windows (I'm using Windows Vista 32-bit)

So I have to keep trying to turn on and off the power button until it starts again it happened a lot lately... a friend told me to update the Bios and I did but the problem still exists...

Another problem... when I play with certain games it gives me an error screen saying I'm do not meet the standard for the game or something like that.
I don't really know what exactly and game stop and I can not go to some level, I mean it work but I can't move forward after this level of the game (the game I am talking about General's and Generals Zero Hour)

Please I need help ASAP

Appreciate your help

Hello

Looks a bit like a hardware malfunction. I think because of the RAM, but before you would test and replaced the RAM modules I would recommend checking if it is not a software problem.

In this case, you need to reinstall the OS from the recovery disc. Using this disk everything will be formatted on the HDD and the laptop will be set to the factory configuration.

So if you are significant-> files on the backup HARD drive it!

If your laptop does not work as it should after the recovery procedure then simple components such as RAM must be verified

Good luck

Tags: Toshiba

Similar Questions

  • Satellite A200-AH6: Error Message: System CMOS checksum bad after BIOS update

    I've updated my laptop Satellite A200 - AH6 PSAE0C (Bios and graphic update) after the installation of Toshiba Power Saver.
    I downloaded the update of the BIOS on the Site of Toshiba and flashed my BIOS.

    After reboot and all start/stop that I do now, I get a black screen (splash screen) with these details listed thus:

    Updated System Configuration data
    ERROR
    0271: check date and time
    WARNING
    0251: System CMOS checksum bad - default configuration used

    Can someone help me please?
    If anything, I would just restore my old BIOS, if possible.

    Please, someone help!

    Hello

    Have you tried to access the BIOS and tried to set it to default settings?
    Isn't it? Do this!

    By pressing the F2 key, you would be able to access the BIOS. Set the BIOS back to default settings and set up.
    Then start the laptop again and check if the same notification will appear on the screen.

    Welcome them

  • Satellite A200 - 23K - Excel and Word has stopped working

    Hello!

    I have a problem on my Toshiba Satellite A200 - 23 k. I installed windows 7 and office 2010. I have a problem whenever I try to run excel or word it stop working. It shows who has stopped working the window.

    Maybe someone had the same problem and knows a solution? Thank you in advance. Waiting for answer

    Hey Buddy,

    As far as I know Office 2010 isn't on the market yet and he s only available beta version.

    You must choose an official version of the office such as Office 2007 or 2003. Both versions work well and most of the problems he's already resolved.

  • Satellite A200 - replacement battery and system now say "none detected battery.

    I put a new battery in my Toshiba Satellite A200 and now it's show no battery detected and no led showing battery recharges.
    Can anyone help please?

    Hello

    For me, it looks like you used not compatible, not taken in charge or bad battery.
    But you can try to remove the battery and he must walk in order to check if there is some loose contacts or something like that

    If this isn't the case then get in touch with a local ASP from Toshiba and order the battery that is recommended by Toshiba.

    Welcome them

  • Satellite A665-14F - built-in Webcam suddenly stopped working

    Hello Toshiba people,

    I used Satellite A665 - 14F PSAW3E more than 2 years and I have really no problem with my webcam, until today. I realized all of a sudden (when I entered the website that requires a webcam) that my webcam is not working. (It works perfectly). My laptop stopped seeing to the integrated webcam.

    First, I checked the 'device manager' to find and check the driver of it, but I couldn't find the webcam. In fact I don't know in which category in Device Manager, I'm supposed to see. After that, I uninstalled the Webcam Application from Toshiba of the thing "Add/Remove Programs" of Windows. I found the Driver + Kit application to the webcam in my laptop Toshiba's European Web site and installed. He asked me to restart after uninstalling and installing both. I did both times. It is still not fixed. In addition, now light blue right next to the webcam (which is supposed to be activated when the webcam is active) is lit permanently, which is really annoying...

    The only other detail I can give to you guys, it's that I realized that I have an "unknown device" with an error icon yellow triangle on it in the category of the 'USB Bus controllers '. Could be related to my problem, as if the webcam is also associated USB hardware? Cause I believe that this unknown hit-and-run driver appeared in the same day with my webcam problem.

    Thanks in advance to any person for his time. (I use win7 - 64 bit)

    Best,
    Ibrahim

    > The only other detail I can give to you guys, it's that I realized that I have an "unknown device" with an error icon yellow triangle on it in the category of the 'USB Bus controllers '.

    I guess that's the internal webcam.
    Webcam module is connected to the USB controller on the motherboard and the yellow exclamation point means that software webcam was not installed correctly.

    In your case, I recommend first of all:
    (1) uninstall the software of webcam again
    (2) remove the unknown device Bus USB controllers in Device Manager (mark and press DELETE)
    (3) install CCLeaner tool can clean the registry and the system
    (4) restart the laptop and install the webcam software once more.

    Good luck

  • Satellite A200 USB key recovery system

    Hi all

    I have a laptop A200-1 body weight, the problem is that the CD/DVD is not working. I have all the recovery 3 CD for Windows Vista (Ultimate) provided by Toshiba, but I can't restore my system. Is it possible to copy the recovery on USB CD and then run the system for windows vista (ultimate) recovery.

    Kind regards
    Asad

    Hello

    I've never tried, but I found this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=228171

    Select this check box. It may be useful

    Alternatively, you can try to install the new copy of the Windows operating system using the USB.
    There are a lot of instructions how to do this with Win 7. Just google it
    After installation of cool Win 7 you could install the drivers of page European driver Toshiba.

  • Satellite A200 - 1IW PSAE6E - black screen suddenly

    I have a problem with my laptop.

    While I'm working on it, even to the internet or any other program the screen becomes 'black' and I can restore new display just standby extended the system / restart / shutdown.

    I ve even tried to restore the entire system to find new and 'clear' Vista 32 bit system (use it Toshiba drive).

    Can someone help me with this?

    Hello

    First you need to update the BIOS, then the graphics driver.
    I read a few threads here in the forum and the users solved similar problems BIOS and update the graphics driver.

    Check it out!

  • Satellite A200 - random stop

    TOSHIBA SATELLITE A200, with Vista operating system. Because of incompatible with several software. I change my OS with Windows XP2. There is none in 1 year. problem. During these months, I have a problem. My computer is shutdown it self when start-up or running randomly

    What happens with my computer? I scanned it and no viruses. Help me please... Thank you to

    Hello

    may be the most possible reason is overheating. Have you ever done cleaning with the jet of compressed air?

  • Re: Satellite A200-1ZF how to run the Toshiba face recognition system

    Hello

    How can I use on my Satellite A200 Toshiba face recognition system?

    The only problem with this software is the program do not see my cam.
    I mean... he see cam, but when I try to save the new face in system then I can read something like "the webcam is currently used or there is problem with hardware.

    So I turn off the webcam toshiba utility, but nothing has changed.
    The hand of the webcam is running correctly. Her webcam Chicony as in the series of toshiba A300 same driver is the same (date, time, number, series)
    So if someone knows what could be wrong please answer...

    Thank you
    Good bye

    Hello

    I checked the download page for your laptop Satellite recognition tool and the face is not available, so I assume that you downloaded it for a different model of laptop.
    It is not so important, and I think it should work anyway.

    I have more Satellite P200 and he was also delivered without face recognition tool. I installed it anyway and it works perfectly. My laptop have factory settings and camera Assistant software is DISABLED.

    Your laptop is installed with the recovery image too?

    Try to remove the preinstalled face recognition software and remove the webcam in Device Manager, restart your laptop and try to install it again. It works on my laptop and I see no reason why it shouldn't work on your too.
    On this forum many people asked if this software can run on older models of laptops and a lot of people have confirmed that it works well.

  • Satellite A200 could not recognize the HARD drive during XP installation

    Hi all
    I need help with my laptop, please...

    My problem is,
    I have a notebook by Satellite A200, and the operating system is Vista, am not satisfied with Vista at all so I bought a Windows XP bootable CD... When I tried to install it it gave me a massage that he could not recognize my hard drive...

    I checked the Web from Toshiba site and downloaded the files from the storage for XP Manager as someone told me it could be the SATA problem and you must apply on your hard disk for XP will see it?

    The question is:
    How much is real?
    How can I install XP on my PC now?
    can I install Storage Manager while I'm on Vista and then install XP?
    I put the Storage Manager on a CD and boot from it?

    am really confused because when I extracted the Storage Manager and view the files I found the setup button and a few other folders, and I do not know what those to use because I don't know what is my hard drive... and any help will be much appreciated

    Thanking you a lot in advance

    Hi abu´s,

    Here´s a suggestion: Please use the search function in the forum because this subject has been discussed about 1000 times!

    Here´s a link to a thread were talking about installing XP on their machines with the need of the SATA drivers. Furthermore, it is important to doesn´t if you have a different machine, the procedure is always the same:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

    Cheers and good luck

  • Satellite A200 suddenly stops showing anything on display

    Hello
    I have been using Satellite A200 for 2 years and it works very well. Recently, I have problems.
    When I use it all of a sudden it stops to show anything on the display but the power to the front lights are still on.

    This problem occurs often. If the motherboard is fried or there is overheating. I gave my laptop for repairs and they said that they had repaired the system board and cleaned the fan.
    But the problem still occurred. If anyone can help me I will be very grateful.

    If the service cannot help I don't know what kind of help you wait here.
    That's the big difference to discuss on a topic if you have laptops in front of you, or on this way where we can only imagine what the problem may be.

    It's really not easy to say why this happens, but there may be a problem with the display cable.
    This happens to you while you work or after display goes OFF mode (set in the power settings)?

  • Satellite NB10T-to-10F - webcam suddenly stopped working

    Hello
    I got the laptop TOSHIBA SATELLITE NB10T-A-10F
    The web cam has suddenly stopped working
    I tried
    Updated bios even without result
    Here is the picture of Device Manager

    In various cases, the webcam can be enabled and disabled in the BIOS
    This option would typically appear in the BIOS under: Advanced-> System Configuration
    Please check this box.

    Otherwise, you need to know also that the webcam driver installation isn't necessary if you use the system Win 8 or 8.1 win because such driver is already part of the system.

    If the BIOS does not have the power option webcam (Advanced-> System Configuration) I would recommend you to retrieve the computer laptop back to the factory to check settings if possible hardware malfunction would be responsible for this issue.

  • Built in web cam stopped working - Satellite A200

    The webcam integrated on my Satellite A200 stopped working yesterday and I don t know why. I have not recently installed new software, but it is not recognized when I use Skype or any other program. When you try to use the camera, an error says no camera is recognized or it's off.

    I uninstalled the driver and reinstalled several times but it didn't help.
    Please, does anyone have any ideas? (Vista OS).

    Hello

    Sorry, but it is not easy to say what the problem is here. I recommend you to roll back OS to an earlier time using System Restore tool. I'm sure that you'll be able to reuse cam.

    I cam on P200 and use it with Skype without any problem. I really hopr you will be able to solve this problem.

    Good luck!

  • Satellite L850 suddenly stopped running applications

    My Satellite L850 suddenly stopped running Apps. From the start screen, they show the image of opening for a while then it crashes and goes back to the start screen.

    Any ideas?

    On this virtual path, it is not easy to say what may be the problem. Try as a first step to roll back OS to an earlier time using System Restore tool. Maybe that will fix it.

    If this is not the case, let us know.

    Did you do something that might be responsible for this? Have you installed something or some changed settings?
    One last thing: when you start the laptop in safe mode can start any application?

  • Toshiba TEMPRO stopped on the Satellite A200

    Hello

    I installed Tempro V1.2 on a satellite A200. TEMPRO tell me I have 12 alerts but when I click the description of the alert,
    I have french a witch of error message telling me that stopped tempro: ' (Tempro a cess to operate).»

    You have an idea to solve this problem?

    Kind regards.

    Maybe you should remove the Tempro software first and then recommended to clean the operating system using the CCleaner and then you must install the new Tempro software on your system.

    But just a tip: the Tempro only sends you a message if a new driver or tool has been transferred to the page of the Toshiba driver.
    In my opinion it of not really necessary, it always runs in the use of historical material and needs OS I had this tool, but I took it off the bone.

    Welcome them

Maybe you are looking for

  • Tecra A2 power led flashing

    After an accident of liquid my Toshiba A2 PTA20E-4LV03LG3 has stopped working and when I plug it into the AC or just battery power led turns green for a second and then it turns orange and start flashing (* L * NGOs 1 sec, * S * ort half dry, * L, S,

  • Satellite L300-1BW - 19 on CD/DVD drive error code

    Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (

  • Designjet z5200 will not print red

    I use the z5200 for printing of banners, posters, and other major media print from photoshop. Red do not print correctly and is often replaced with colors salmon-ish or brown. Please notify

  • new window during execution

    Hello. In my application, there is a system which makes the measures. Then these measurements in a table and in a file. I want to create a button that when you press new window opens and graphic waveform measurement is displayed here. I understand th

  • How the * fact pick from Microsoft that they deal with the problems of software?

    OK, so I just got a phone call from people "Microsoft" Software, saying that there is crazy with my computer problems. The person who I understand only thanks to a focus then directed me to look at the event viewer, so I could confirm a problem with