What is missing on my windows have 6 pack 2 windows drive

Similar Questions

• What line HP Envy 15 models have 2 bays/mSATA hard drive slot?

  I would like to know what line HP Envy 15 models have 2 HDD bays, because I intend to buy an envy 15 (what I want because of its lower price) or a 17 want (that I checked to have 2 drive bays on all models, according to another post on the forums).

  Any help would be appreciated.

  Thank you!

  No 15 s want to have 2 hard drive bays and not all Envy 17 s 2 hard drive bays. This is the specific model.

• 4540 proBook s: unknown device missing after installing windows driver 8

  My laptop is a Probook s 4540

  I installed Windows 7 to windows 8.1 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

  The hardware Id are:

  ACPI\VEN_HPQ & DEV_6000
  ACPI\HPQ6000
  * HPQ6000

  I don't know what it is or a driver for it.

  No matter who else knows it or know what this device and where I can get a driver for it.

  Thank you

  Hello

  Should be HP 3D DriveGuard 5 on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456&swItemId=ob_124200_1&swEnvOid=4158

  Kind regards

  DP - K

• unknown device missing after installing windows driver 8

  I recently installed windows 8 pro to my pc and installed all the drivers but in my device manager it is now a yellow mark on the unknown device.

  Location- on PCI Express Root Complex

  Details of hardware-

  ACPI\VEN_HPQ & DEV_6000
  ACPI\HPQ6000
  * HPQ6000

  Hi TheRaven2099. First try the driver for your computer page and click on the button "Scan now" at the top left.
  
  
  
  HP Pavilion dv7-1240us laptop support:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & LC = in & Product = 3860622
  
  
  
  
  
  If that does not detect it, this reference may be for that.
  
  HP ProtectSmart hard drive protection:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & softwareitem = ob-109953-1
  
  
  
  Let me know.

• What connectors SATA speed do I have on my motherboard?

  Hello

  This is my first time on this forum posting.

  I would like to find on what SATA connector should I "plug" a new HARD drive on my motherboard.

  What SATA connector is best to have the primary/boot HARD drive connected to?

  The PC I have is quite old now, and I don't even know if the motherboard has SATA II or even SATA III (speed) connections.

  The motherboard is:
  MS-7613 (Iona-GL8E)

  Here is the link to the HP specifications page.
  http://support.HP.com/us-en/document/c02014355

  On the list of specifications for the storage, it lists just x 4 SATA connectors.

  I have reason to believe that this means that they are all only SATA I (speed) connectors?

  It would be great if someone could let me know.

  Thank you very much

  Ian

  You are the very welcome, Ian.

  Yes, it's the correct way to get the disks attached.

  1 is the main, 2 is the secondary image.

  I see these two guys on the side.

  The mine has 4 ports that resemble the orange and blue in the picture.

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?

  I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?

  1. in what year is your Mac?

  2. What is the size of your storage internal?

  3. what version of Windows?

  4 as a general rule 60-100 GB for W8 + / W10 is recommended. You can also create a minimum Windows (30-50 GB) and use an external drive D: for documents applications for portability.

• HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

  HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

  You need an external DVD drive to get the repair will.

  Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

  The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

  A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

  See this page from HP

• I can't open attachments to email... He keeps trying to open it in Windows Media... What is missing here?

  I can't open attachments to email... He keeps trying to open it in Windows Media... What is missing here?

  Save the attachment to disk.  Then right-click on it and choose open with (or go to properties |) Change) and then designate the good program with which to open the attached file.

  Steve

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

  My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

  Husband confused,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  06/15 / 1104:36: 37 pm

• I just downloaded windows 7 on my computer and now it says I do not have a card installed, network driver what should I do?

  I just downloaded windows 7 on my computer and now it says I do not have a card installed, network driver what should I do?

  If the computer is running XP or Vista, for example, before installing W7, it may mean that the manufacturer of the PC card or network did not have a driver for W7.

  Go to the site of the original manufacture of the PC (brand/model) support and see if they make an adapter for your specific model of W7. If they do download it, to get the right version IE 32 or 64-bit as needed. If the PC manufacturer doesn't provide one, try the website of the company that makes the actual adapter and see if they do.

  If you are unable to connect to the internet on this PC, you will need to download the driver on another PC and transfer it through via a USB stick or an SD card.

  Is there no driver W7 made for your specific PC and its adapter, then you may need to consider buying a replacement network card and use it.

• Should what type of license for Windows I use for a company that will have a Web site?

  Hello

  Could you tell me please what type of license for Windows should I buy for a company that will have a Web site (without space)?

  I mentioned that I'll keep maintaining for her by a CMS, and I bought the hosting and domain.

  Forward to your response.

  Best regards

  F.

  • client Windows (for example, 7, 8, 8.1, 10) Limited has somewhere around 5 concurrent connections. and costs up to $300.
  • Server cost $1000-$1200 and comes with 5 licenses client [connection] or however any extra you pay.
  • You can configure a web server using this (local, apache already sets up LISTENING to hang on to all of the network adapters using the *-http://jesusnjim.com/web-design/setup-test-server.html)

• Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Sometimes the audio does not work and another day, everything is ok. What can this be?  IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Hello Ronald.

  A problem are not uncommon. Something for you to try:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Beats audio software missing after installing windows 8.1

  Hi all!

  I have a problem I would like help with. I just upgraded to windows 8 to 8.1, but now the beats audio/software interface is missing, and I can't get it back. What should I do? I have a HP ENVY m6-k088ca Sleekbook.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61792.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the phone by holding down the SHIFT key when you click on close to temporarily prevent a "boot hybrid.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

  Restart the computer again, then check if the Beats audio Panel is now listed in the control panel.

  Kind regards

  DP - K