What is network rate measured in?

Similar Questions

• can I call from sri lanka to the US and what are the rates

  I take my computer with me so I can call usa Sri lanka and what are the rates

  Beachbum wrote:

  I take my computer with me so I can call usa Sri lanka and what are the rates

  With Skype, your location is unimportant. Calls to (or within) the United States wherever you are cost 2.3 cents / minute or part of it.

  You can easily find the information yourself with a little research here:

  http://www.Skype.com/intl/en-us/prices/PAYG-rates/

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• What is network-LSI of LSI PCI - SV92EX Soft Modem?

  What is network-LSI of LSI PCI - SV92EX Soft Modem?  I got this as an optional update today but I don't know what it is or what it controls.  I have windows 7 64 bit on a new computer (1 year).

  What is network-LSI of LSI PCI - SV92EX Soft Modem?  I got this as an optional update today but I don't know what it is or what it controls.  I have windows 7 64 bit on a new computer (1 year).

  It's a phone line standard modem on your computer. Used for a variety of as internet service switched, transfer of data on other types of telephone networks or by fax from your PC. Some also have the normal voice functions (ie. make telephone calls using a microphone and speakers or headphones) but I don't know if this one has that. Your computer's manual should say something about it.

• What Oracle network uses for CAR traffic? where you get the Info?

  Hello
  
  I use two-node RAC on Oracle 10 g R2 (10.2.0.3.0) version on SUN Solaris 10. I want to know "what Oracle network uses for CAR traffic? where you'll Info»
  
  -Kumar

  Hi Kumar,

  In 10g, you can query x$ ksxpia. If the cluster_interconnect is stored in the OCR (by default), you will get

  SQL > select INST_ID select, PUB_KSXPIA, PICKED_KSXPIA, NAME_KSXPIA, IP_KSXPIA, x$ ksxpia;

  If you have specified the cluster_interconnects parameter in your init.ora:

  Columns to look in: INST_ID select PICK NAME_KSXPIA IP_KSXPIA P

  And also you can use 'CPI oradebug' to see who connects the database uses:

  SQL > setmypid oradebug
  SQL > oradebug CPI

  It could be that useful...

  Thank you
  LaserSoft

• What _is_ 'Network Lock' exacfly...

  as opposed to, say, 'wireless scecurity' (that is, an encryption standard selected) or a router access password?  Nothing I saw in the docs of Network Magic explains this feature more precisely to say that he "locks intruders out of your network."  So, my question is how?  What configuration of router handles this?

  My environment of Network Magic is as follows:

  Toshiba provided by Comcast cable modem (model # not practical because I'm away from the computer)

  Router Linksys WRT54GS, access protected by password

  Computer HP Pavilion Elite HPE204f running Windows 7 Professional

  Network Magic 5.5, latest updates from 01/06/2010 download

  I use a trial download of Network Magic 5.5, who has no trouble finding my router Linksys WRT54GS - manually pre-configured with change default SSID and password, SSID broadcast disabled, active / WPA2 key, filtering by active MAC address, etc.- and connected devices (currently 1 laptop wireless, 1 Wired printer) or decide that WPA2 wireless security is active and dsiplaying WPA2 passphrase under "Wireless security."

  However, "Network Lock" is shown as "Disabled" and, at least from the 1 click, Network Magic says that it 'cannot be configured for the router."  As other security measures are in place and active, I guess that I can't live without "Network Lock" if I have to, but I would like to understand precisely what I live without.

  Thanks in advance for all the lights.

  Network locking is a feature similar to the MAC address filtering. Each device has its own MAC address by selecting the network locking, only authorized devices to connect to your network.

  I hope this helps.

• What iOS 10 app measurement clock 'in bed '?

  I have used the clock app to remind me to go to bed and wake up, and I noticed that it was time "to bed" (health App: sleep data analysis). Numbers don't align well with the time that I'm in bed, and he seems to report that I get up several times a night. (Can be specific, not sure).

  My question is: what is actually measure? Source of data? It is only based on the clock, or also the sensors of movement to see if I'm in a bed (or even the microphone to hear me snoring?). I also tried some other apps of sleep, and they seem to make the distinction in the meantime 'to bed' and the time spent asleep. Is there documentation somewhere about how the OS tracked these numbers?

  Thank you!

  

• Satellite A30 - what wireless network cards are supported?

  Have a computer Satellite A30 laptop-404, I wonder what kind of card Mini-PCI Wireless would be compatible with my PC?

  Found this one for example.

  Gigabyte GN-WI01GS MINI PCI ADAPT 802. 11B / G BASE of RALINK CHIP SNM

  Anyone who knows what other types could be used?

  Hello

  Hmm, well I've never heard of Gigabyte WLAN cards and I don't know laptops that are equipped with these cards.

  I checked Toshiba Web site and some Satellite A30 models shipped with a card Atheros and Intel WLAN. So, I recommend buying a those manufactures wireless network card.
  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible.

  Good bye

• The NI USRP-295xR RIO allows a front-end Ettus BasicRX IF-sampling? And what is the rate of the ADC to FPGA data?

  Hello!

  I'm in the quest to replace some aging PCI-5640R. I am currently using as a portable-Journal data solution, mounted in a Magma Expresscard to PCI box with a laptop. As a reference of the time, I use a Symmetricom XLi.

  The equipment is dependent on the sampling finished a set of samples once a trigger signal goes high and also receive antenna azimuth information using two lines PFI more. The signal is sampled at IF, 30 MHz, and the signal is less than 5 MHz bandwidth.

  Now, I started watching the Ettus X 301 with a GPS OCXO and MXI-express interface which should be the same as the USRP-295xR NI. It is available as device NI RIO with three different front ends, unfortunately, none of them work at 30 MHz.

  Q-1: Ettus has the front-end 'BasicRX', but it is only considered compatible with LabVIEW driver and not necessarily with the RIO. Is the front-end BasicRX usable with the USRP - 295XR RIO and MXI-interface with LabVIEW FPGA? Should I just avoid trying tune the nonexistent LO? As long as he gives me data, I can live with some error messages during the Setup...

  It's the best solution for me, but if it is absolutely impossible, I have a few questions:

  Q-2: information on the front end are really rare in the pages Web OR both Ettus, but the WBX is listed up to 50 MHz frequency, to have a filter of low pass of bandwidth of 40 MHz to I and Q. This should mean a total of 80 MHz of bandwidth with I and combined Q,-40 to 40 MHz. Why did the bandwidth to Web pages as OR listed being "40 MHz bandwidth in real time", if the low pass filter of the WBX is 40 MHz in I and Q? Not the band total bandwidth or 80 MHz?

  Q-3: assuming a bandwidth-40 to 40 MHz: could I put the WBX LO at 50 MHz, be tuned to the frequencies from 30 MHz to 20 MHz signal,-20 MHz and use a bandpass filter to the FPGA to extract the new signals and remove all other signals?

  Q 4: I tried to start a FPGA project in LabVIEW and add the x 301/294xR/295xR as a target. Data clock is locked to 120 MHz, which I guess means he will receive no data to 120MS/s IQ? The x 301 Ettus is listed as provide data of the ADC to the FPGA at a rate of 200 ms/s, could someone explain to me why, OR USRP RIO expects only database 120MS/s?

  Hi Idar,

  Yes, you should be able to put the basics on your X 310/USRP RIO and use LabVIEW FPGA to receive 120 MECH. / s of the DACs.  The example I posted is in fact not for the precompiled file bit.  The example I posted is for LabVIEW FPGA, which allows you to add the IP address for the FPGA.  There is a sample project that comes with LabVIEW FPGA which is the recommended starting point to build your FPGA application.  The sample project has all the configuration set up as well as broadcast continuously and pads/FIFOs in the FPGA and examples for synchronization.  There are comments in the code example that show where he must add your own blocks of property intellectual as a filter and decimater you mentioned.  The PDF I posted shows what changes you must make to this sample project using the Remora Basic/LF.

  I would like to know if I'm not explaining this clearly, or if you have any questions, I'd be happy to help you!

• Computer Windows Vista says it is connected to the network 4. I don't know what is network 4.

  on the bottem of my screen where the icons were similar to the he mcfee icon and symbol of volume there is a picture of 2 small computer screens, and when I scroll above him, it says connected to the network 4. I don't know what network 4 is and I have never seen this before and the other day I saw him and it says connected to network 2. I would like to know if anyone can help me in this matter. What network average 4?

  original title: bottem icon

  This icon is the icon of your network. You don't say what kind of network you are using. However, I will give you an example. If you repeat your network connection or use a network USB key and plug the key to another USB socket and create a new Windows login will name each new connection 4 then 2 then 3 and so on. You can rename the connection to your liking. To rename the link to right click on the network icon in the notification bar, click Network and sharing Center, click on manage network connections, right-click your network connection icon and click Rename.

• Can someone help me understand what represents the em measurement?

  I have been broadcast in the em measurement (or is it en) and I can't find an explanation as to what this means. Can someone explain it to me with an example or two?

  Thank you

  Allen Macfalda

  Murray * CPA * has written:

  It is a metric of relative police.  1em means use the default size of the browser, while .5em means use the size of half of the default browser.  The default size is usually 16px, unless changed by some other CSS on the site.

  Hello

  To add to Wharton, Murray wrote, the metric of relative police comes actually the letter size me '. This means that if you have a width of 20em, there will be 20 times the width of the letter'm ' in your font not selected browsers by default fonts, (that's the theory). Some older browsers can use the browsers default font, (NN4, I say old!) or even some current mobile browsers.

  It is also possible, (in some modern browsers) to use in or ex for measurement, and these are based on the letter ' is, and 'x' respectively.

  PZ

• Satellite A200 - 1 M 4; What wireless network adapter is installed

  Hello
  I need help to identify the wireless network adapter for my laptop. Anyone know the type of card?
  Best regards!

  As a first step, we need to identify your model of laptop. ;)
  Please send us the model name and model number. You can find it on the gray label placed at the bottom of your laptop.

• I don't know what wireless network card driver to install for Satellite A200

  Hello

  Im trying to install the adapter wireless by Satellite A200 (PSAE0E) and can not make it work.
  The website offers different drivers and says that I have to click on "How to identify my wireless network card driver", but that the document does not exist.

  Can anyone help?

  Thank you

  According to the specifications of the laptop your Satellite has Atheros AR5006EX wireless network adapter.
  Download from http://aps2.toshiba-tro.de/wlan/

  Just choose the right operating system.

• What wireless network card Mini-PCI can I install on Satellite 1410 604

  Hello

  What types of cards Mini-PCI can I install in this laptop?
  There is information in the user manual, this Satellite 1410 minipci location is compatible with Type III A.

  Will this card http://www.gigabyte.com.tw/Support/Communication/FAQ_Model.aspx?ClassValue=Communication&ProductID= 985 & ProductName = GN-WI01GS work to insert it?

  I have goggled a bit and found a XG - 601 802. 11 b / g Mini-PCI WiFi 54 Mbps card.
  According to the description of this map is a Type III interface supported A 32-bit.
  The Intel PRO/Wireless LAN 2100 3 card Mini PCI also supports an IIIA interface.
  These are one of the first Wlan miniPCI cards that have been designed for the use of Wlan and support several protocols of Wlan

• What wireless network for Time Capsule backups?

  Just installed a new Capsule of time at home. The time Capsule is a wireless router, and I can connect all my devices wirelessly to the Network Time capsule wireless. I still 2 other active wireless networks because I use 2 additional wireless routers for access anywhere in the House. All three of my wireless networks are created from the same internet modem. I want to confirm is whether or not my Mac can be connected to one of the 3 networks for automatic backups on the Time Capsule wireless? Or is the Mac must be connected to the network of the time Capsule for automatic backups to time capsule wireless? Thanks in advance for your help.

  The same as the TC.

  Set the other to extend the network of transport CANADA instead of create a network.

• What makes USB boot measure 4 windows 8 iso image

  I downloaded windows 8 iso image and Rufus make USB bootable. Still, my hp 2000 does not recognize USB. Here are the steps I performed.
  1 windows iso image downloaded 8.
  2 downloaded Rufus
  3. plugged in USB ran rufus, rufus in USB format
  4. iso image loaded windows 8 on USB
  5 laptop power target press ESC, f9 for boot order, but sees no USB option for starting.
  I already changed my boot order in the bios and the target computer has booted from USB before with another program.
  Please tell me what other steps should I take thanks

  All went well?

  If so,.

  PLEASE CLICK ON ACCEPT AS SOLUTION TO HELP OTHERS WITH THE SAME PROBLEM

  CLICK ON BRAVO TO SAY THANK YOU