What is the best configuration of matrix Raid for Photoshop?

Similar Questions

• What is the best configuration of memory heap for JBoss?

  I'm running a Windows 2003 server and JBoss runs as a service.  Configurations current heap is 1024, but I'm having some problems with the failure of the service.  What is the setting of optimal heap memory?  Thank you

  There is no memory optimal setting for LiveCycle.

  It depends on the components that you have chosen to deploy.  Content Services ES2 is deployed, your chunk size settings memory must be about 2 GB if 1.0 to 1.7 GB may be sufficient.

  http://blogs.Adobe.com/LiveCycle/2010/01/optimal_livecycle_es2_jboss_ru.html

• What is the best configuration of network with 4 NICs (2 x 10GB and 2 x 1 GB)

  I have 4 hosts running ESXi 4 Enterprise license with 2 x 10GB and NIC 2 x 1 GB, what is the best configuration of network to be used in this configuration? where FT logging should go? I can't add NICs more because it is on the HP blades.

  It's my current setup:

  

  Thank you

  Dan

  You talk about the c3000 blade enclosure, aren't you?

  For a solution tolerant when disaster strikes, you will go probably with:

  VSwitch0 has.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic2 (10 GB/s)

  (A.1) VMkernel Port Group (network management)

  vmnic0 = standby

  vmnic2 = active

  (A.2) VMkernel Port Group (Vmotion)

  vmnic0 = active

  vmnic2 = standby

  Networks of Virtual Machine A.3)

  vmnic0 = standby

  vmnic2 = active

  VSwitch1 B.)

  Physical NIC: vmnic0 (1 Gbps) + vmnic3 (10 GB/s)

  (B.1) VMkernel Port Group (Fault Tolerance)

  vmnic1 = standby

  vmnic3 = active

  -Default - VMware uses round robin to assign a virtual computer to one vmnic.

  So you don't configure port aggregating on the switches.

  You can, however, traffic using if possible VIRTUAL networks, this is why you must configure the ports as junction ports.

  André

• What are the best settings to standard calibration for the XBR65X850C?

  What are the best settings to standard calibration for the XBR65X850C?

  Hi DRATCLIFFE,

  Thank you for your time to write a post.

  We are very sorry for the late reply.

  Change the picture or the sound settings of your TV depends on your preferences and on what you watch/listen to.

  You can use the settings preset for image and sound.

  In addition, to better enjoy your viewing experience, follow these steps:

  • Install the latest software update. The updated software and the driver for your Sony product are available online.
  
  
  • Set the automatic software download setting to automatically download software updates.

  Thank you
  ^ Ron

  If my post answered your question, please mark it as "accept as a Solution.

• What are the best export settings to use for a video posted on facebook

  What are the best export settings to use for a video posted on facebook?

  I used the H.264 > Vimeo HD presets in Media Encoder with excellent results.

  Thank you

  Jeff Puler

• What are the best setting of calibration screen for video editing, if you are shooting indoors, without natural light?

  What are the best setting of calibration screen for video editing, if you are shooting indoors, without natural light?

  Not really related to Prem Pro, however:

  Neutral gray scale to set the brightness (white saturation) and contrast (black crush).

  Conveniently located:

  Gamma: 2.2

  White point: 6500K (5800K with ambient lighting)

  Brightness: 100-120 (cd/m)

  Use a calibration device like SpyderElite (above applies). Grade with a neutral gray background low light level - easier on the eyes.

  Claire

• What are the best screen protector and case for iphone 6 s more on amazon?

  I've seen several ads for the glass screen protector and bulletproof glass, do not know what is the best!

  There are probably thousands of cases and a whole bunch of screen protectors. Because nobody here knows your needs, preferences or budget, even if we knew everything about each other, we still know not which one would be best for you. I suggest that you sort your search results by hand and then read a representative sampling of the most popular to those reviews.

• What is the best small form factor hardware for esxi?

  Hi guys

  I want to install a laboratory at home with two ESXi hosts to the laboratory vMotion etc.  What is the best compact equipment to buy?  I was thinking about a macmini or NUC?

  Thank you!

  Both work, but are not supported and you will probably need to make some tweaks to make it work.

  According to me, the Mac Mini: s give more 'bang-for-the-buck.

  Linjo

• What is the best configuration of PC for first Pro CC? Is it more cores or more RAM or GPU?

  What kind of PC configuration is the best solution for 4K video editing in first Pro CC?

  Someone says is the CPU: another is the Ram... I m confused on denunciations. Is perhaps a good solution?

  • Intel 7 5960 x 8 cores
  • Ore 64 GB of Ram 3000mh more...
  • PCIe SSD 512 GB m2
  • SSD 840 Pro for OS
  • GForce Titan x

  Now, I have:

  • Intel 7 3770 K
  • Titan x
  • 32GB 1600mh
  • Takt 4.1GH

  Hope someone can tell me the best solution for this.

  Thank you

  [transferred to the Forum Hardware by mod]

  the new processor is E broadwell, be they a few months. the desktop version of ordinary broadwell (non-extreme) was in trouble and has been for the most part ignored by intel. they released a refresh haswell and then skylake. a few tokens broadwell who have come showed pretty good performance on haswell improvement, then maybe we could see the same thing in broadwell-e. If you want a 5960 x, it could be a few sales in order to reduce inventory before broadwell-e is released, either of people selling used to enter the new broadwell-e...

  the samsung 950 pro is several times faster in speed and low latency vs ssd sata. I see the main advantage of the samsung 950 pro using a player to the media and the drive cache/previews. with small bitrate of codec, a regular sata ssd should be end. very high-speed raw images that may actually need the samsung 950 pro would only hold a few minutes on the small 512 GB drive.

• What is the best configuration of battery for lenovo 420 s

  I read on the lenovo Web site, you can get up to 9 hours on the thinkpad 420 s and I was wondering if anyone knew the farm configuration to achieve this setting? Up to now I get only up to 3 hours IF I have it on very low performance. I generally keep a maximum performance when it is plugged. Anyone have any ideas?

  I think that would be carried out using a battery 9 cells more the extra battery that can replace the optical drive in Ultrabay housing. http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...

• What is the best program of free fax for Win 7

  Anyone has any suggestions for the best program available fax that works perfectly with Windows 7 (64 bit)?

  Oops. I know what happened.

  I'm a MONSTER everything behind the scenes being sent on my Internet stuff, I went in the service "turn Windows features On or Off" and off Media Center and other things that I do not use. I guess that I have disabled the feature of Fax too. Just, I went and well restored. Now, I'll try to see how it works.

  Thank you.

• What is the best bit rate to use for files WMV to DVD?

  I shoot with a low point and shoot digital camera.  I take the files AVI-video from the camera, which are quite large, and edit them in Windows Live Movie Maker 2011 and then save them as WMV files that are typically much smaller.  I like to create DVDs with better videos using Windows DVD creation or another program video.  My question is what bit rate to specify when I publish the films completed as WMV files?

  My camera AVI files can be played in Windows Media Player.  They have little of rates which vary from about 3 Mbit/s to a little more than 5 Mbps.  Is STANDARD DEFINITION 640 x 480 VGA quality video.

  Movie Maker default bitrate for the option "burn to DVD" is 2.99 MB/s.  I do not notice a difference in quality between the 2 MB/s I usually use and.  (I chose 2 Mbps, because in the past, I've used Windows Media Encoder and it defines "DVD quality" like 1-2 Mbps transmission speed and quality "HD" as 5 Mbps.)  Bit rates below 1 Mbps up to 500 Kbps have been defined as "Quality VHS" and below which has been 'QVGA quality'.

  With important videos, I publish movies with a flow rate of 5 Mbps.  Default speed of movie Maker for videos "to be played on my computer" is 7.69 Mbps, but it's more than the AVI from the camera, then how is this possible?  How can save the file with a bit rate higher than the bit rate of the input file?

  Is another experiment, a good way to decide on the rate of good bit for my projects?

  Hello

  Thanks for joining us out on Microsoft Community Forums. I understand that you want to know the best bitrate for video files Windows media burn on DVD.

  I suggest you check out the link to check the bit rate and resolution.

  The movie settings: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-Vista/movie-settings-frequently-asked-questions

  Refer to this video file formats can I choose to publish my movie in windows movie maker? The link above.

  If you face problems more while working with Windows Mail on Microsoft Community Forums, we will be happy to help you.

  Thank you.

• What is the best way to make videos for more quick reading?

  My VLC media player works slow segments buffering on a video rendering, After Effects, I've worked on that. Can anyone of you tell me the best recommended video format so that the video player can read faster?

  I would never recommend 720 p unless there is a specific need for this image size. The standard is 1080 X 1920 pixel square and 29.97 frames per second in all countries that runs of their electricity at 60 cycles and 25 frames per second in all countries on the standard PAL where electricity is 50 Hz. If the composition settings show custom you had better know exactly what you are doing. You should also use Adobe Media Encoder to render all items to be delivered. Unless you have requirements of presentation given by a client using H.264 and choose the preset that matches your model size and pace. If you go on YouTube, use their presets. If you use Vimeo their. Here again, unless you know exactly what you are doing should not be Custom in the settings panel. The only thing you might want to check is to ensure that the multi pass rendering and maximum quality is selected. These will slow a bit rendering but will reduce the compression in color and movement artifacts.

  The Cue Render in After Effects is very useful to render DI (digital intermediate) in a format without loss of production or master visually lossless. Is it y important audiotape or its treatment in your project, or there is a lot of editing then you'll want to make your rendering of Premiere Pro and your sound work in hearing. AE is primarily designed to create Visual effects and motion graphics and short sequences shots that will be edited and assembled and put to the point in a NLE such as Premiere Pro. Too much new users to EI and even quite a few people who have used AE for a long time, try and make 5 or 10 movies minutes in AE. I had a student once tried to change a minute 20 Sifi short in AE in a single model. It was a mess unwieldily who turned into a pretty decent movie, once we cracked in some 40 separate projects with eight or ten comps in each then cut the film in Premiere Pro.

• What is the best plugin to version control for JDeveloper for SOA projects

  We are evaluating different products available for Version management.
  
  Is a criterion, what Version Jdev control works best with. I found site of Oracle which Jdev 10.1.3.x, the following plugins are available
  http://www.Oracle.com/technology/products/jdev/htdocs/partners/AddIns/Exchange/index1013.html
  
  Integration of subversion - integration with Subversion 1.3.1 and 1.3.2 Version management
  ClearCase integration - integration with Clearcase 2003.06.x Version management
  Serena Dimensions integration - integration with Serena Dimensions 9.1 Version management
  Perforce integration - integration with Version management necessarily 2005.1 and 2005.2
  The MS Server Integration - integration with Microsoft Team Server Version Management team
  
  Can anyone give feedback that is the best of them in terms of:
  
  1. effective integration with Jdev.
  2. ease of maintenance.
  3. help the deployment on multiple environments
  4. the other relevant points that should be considered.
  
  I would be grateful if someone could put light here.
  
  Rgds,
  Amit

  The forward direction is certainly Subversion to CVS. In the 10.1.3 days but there were a few things that you could do with CVS and JDeveloper with Subversion.
  This change in 11g - I would recommend that you go with 11g and Subversion.

• What is the best platform to develop applications for BlackBerry 10?

  Hi all

  I have developed applications for BlackBerry 6 and 7 for the last 3 years, but I am very new to BlackBerry 10. I know that most of the developer would like BB 10 is something new. I have about five years of experience in the JAVA platform, but unfortunately BB 10 is not supported it unless you develop applications for Android and the port at 10 BB.

  When I checked the list of programs that are supported by BB 10, I saw C/Cpp, Cascades, HTML5 and action script among them. But which one to choose? There is where I am confused. I don't have any experience in the above mentioned technologies. If I select, I need to learn from the beginning. When I went through a few posts, I got to know many people prefer to develop in HTML5, as it is a cross-platform technology. But many have said that it may have problems of performance and the native technologies like C/Cpp, waterfalls will be the best options in terms of performance.

  Can anyone suggest me the best technology to start with BB10?

  Cascades is based on Qt, which is a cross-platform C++ library. It encapsulates many low level BB Native API - s for easier use, but you still have direct access to these APIs if necessary. C++ syntax is similar to Java, so it shouldn't be too difficult to pass. I suggest choosing stunts.