What is the case with the 33rd host in the cluster?

Similar Questions

• What is the cluster node and which is a member of the cluster?

  What is the cluster node and which is a member of the cluster?
  How to differentiate them?

  I agree with you all.
  But note that a node is a server JVM. A large number of nodes can co-locate in the same machine. Entire application process or the server that is running software consistency is called a cluster node.
  But Member and the cluster node is different concepts. Consistency is logically divided into clusters, services and caches. A cluster of coherence is a group of cluster nodes that share a group address, allowing you to communicate, the cluster nodes. Generally, a cluster node will join only a single cluster, but it is possible for a cluster node to join (membership) several different groups, using a different group for each cluster address.

  Fran

• Good way to stop all hosts in a cluster

  I have a small environment with 2 esxi hosts in a cluster. my company will have 2 planned outages that I need to close all the servers down including the esxi hosts. What is the right way to do this to make sure that everything is properly turned off and no vmotion will trigger that everything will be turned off?

  Thank you!

  Welcome to the community - the order you need to shute down is:

  1. Stop the virtual machines
  2. Put the hosts in MAintenance mode
  3. Stop hosts
  4. Stop vcenter (if vCenter is a virtual machine, you will need to connect to each host separately and close).

  To put it all together

  1. Start the hosts
  2. Begin to vCenter

• What is the best way to sync contacts with a host of webdav?

  I use Thunderbird and Contacts Android as of client applications with an owncloud 8 hosted remotely. I have activated the application Contacts on Owncloud and now I want to sync the contacts between these systems. What is the best way to do it?

  I try to get sorted first Thunderbird. I tried Addressbooks Synchronizer, but currently, it gives me a message telling me that my credentials are wrong or is sitting silently, do nothing. I am aware that it is a file synchronization, the method of synchronization not saved, so it is not ideal, in any case.

  Is there a better, good timing, method I can use? I refuse to the thing that he is an unreasonable request or that no one asked before me, but I can't seem to find the answer.

  Thanks, Martin

  WebDAV my initial reaction was sogo connector.
  These guys recommend the same http://kb.mozillazine.org/Sharing_address_books

  Here http://www.sogo.nu/english/downloads/frontends.html

• So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

  So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

  Hi GuyT6,

  ·         What version of the operating system is installed on the computer?

  I suggest you contact the customer assistance form help and more information.

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• What is the problem with kernel_task?

  Hello everyone,

  What is the problem with kernel_task?

  I explan: Macbook Pro early 2011 LION OS up to date.

  I bought 8 GB on China supplier, CRUCIAL...

  Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...

  Well, I went back to a clean install, a manufacturing one, with nothing.

  Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:

  Sometimes the kernel_task crazy sometimes not...

  Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.

  Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.

  I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.

  So what?

  I bought something conivient on Support and friability so today he's dead?

  What should do?

  If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.

  Reports of kernel panic: "/ Library/Logs/DiagnosticReports".

  http://support.Apple.com/kb/ht2546>

  http://support.Apple.com/en-us/HT200553>

  The panic report should have "panic" in the name of the file.

  Kernel panics tend to come from 2 sources

  • Material:
    • 3rd party RAM is the most common.  Replace or return the original is usually the solution.  Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
    • Broken USB cables or USB devices have turned up as the 2nd most likely material number.  Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
    • There are a few Macs with graphics chips that have failed.  I don't know that they exist, but do not know what model Mac had these chips.
  • Software
    • antivirus protection.  It is the number 1 most panicked related software cause.  More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
    • Other core 3rd party extensions are a distant 2nd.
    • NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.

  If run kernel_task is often caused by core 3rd party extensions.  It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU.  If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.

  Start in safe mode is usually a test to see if 3rd party extensions are part of the case.  But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components.  Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.

  The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing.  This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic.  Especially right after an OS X update to a new version.

• What is the best way to preserve my having iPhoto library merge my pictures of girls with mine that his iMac had stopped working.

  What is the best way to preserve my iPhoto library had fusion - UN-intentionally - pictures of girls with mine as its iMac had stopped working. Some how I have about 48 000 pictures now where before I was about 11 000

  The iMac's hard drive has been deleted in tact and two weeks ago, she bought a new iMac 27' which has only the "Photos" application, but in trying to restore his iPhoto library, it gets about 24% then stops with a po - up window saying "cannot continue due to inconsistancies", that these are we don't know.

  I think using his old h/drive connected via usb to my iMac, I managed to save his library.

  On an external drive, I would like to make my backups that are up to date for a few days so that my photos need to be secured.

  1. Can I remove my iPhoto library and then re - import of my external hard drive?

  2. Can I give my daughter a copy of the "iPhoto app" and install on its new iMac and then re - import photos into iPhoto?

  More popular tips.

  Alan

  I copy the library from the back to the top first before deleting anything, in case something goes wrong. You can choose which library to open hold down the option (or alt) key key and launch of iPhoto. In the menu that appears, select "Choose Library"

  No. but you can give him the iphoto library and she can open it with Photos.

• ThinkPad t460s: what is the latency (CASES) for welded in chip RAM 4 GB or manufacturer model/room?

  My t460s is on order. I expect with 16GB of command expansion module. It will be 16 GB 2133 DDR4 SO-DIMM. they come with different parameters of CASES (latency) 13-15. What is the latency of the installed module?

  If you access t460s, is easy to determine by running the test utility system or memory such as CPU - Z.

  

• What can the LAbview with a USB webcam?

  Hi there, I was wondering if someone can help me with my main project.

  I intend to purchase the NI Labview remote control.

  I want to be able to control the distance of Labview Panel through the web.

  Is it easy to generate NI Labview Remote Panel application on my own? I'm still in College.

  or can I buy the NI Labview Remote Panel app for $309 and use applications to control my labview through the web software.

  in this case, I counted about writing software to take the USB camera and post it on the web.

  What can I do with the usb camera?

  can I change the color? hear the sound? you guys can suggest me to do if I get to work with the web?

  Help, please...

  Thank you in advance...

  OK, back to topic.

  A classic exercise would be the detection of changes such as the detection of an object moving for security, etc.. Expand on that and save images when movement has been detected. Another step further, to subtract the background of the object in motion and present a sequence of images of just the moved object.

  Too exotic?

  That level down to a manually-initiated process to do a "what's new? It compares a before and after picture and shows you what has changed.

  Ben

• With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  Windows XP 64-bit is one of those odd elements that does not quite fit in.  It is based on the code of Windows Server (hence why it only goes back to the SP2 not SP3 as Windows XP did) so it is - upgrade (for purchase in any case) options are limited.  Frankly - Windows XP 64-bit is one of these products, most people should have just skipped (in my opinion) - and with this in mind - the replacement for those running it should be to get Windows Vista 64 bit or Windows 7 64-bit or 64-bit Windows 8.  It there just will be no discount to do on monetary incentive plan.

  My suggestion - if your system is good enough, compatible, etc. and you actually * needed * to upgrade (it's not like YOU all just because Microsoft will stop their support extended to it in 2014 - big deal?)  Download Windows 7 Professional 64-bit and clean install.  You can use the free Windows XP (32 bit) MOU to run many older programs, you have * if * you have one that cannot be run under Windows 7 or with the compatibility mode.
   
  In addition - get an unknown computer (for you).  You can find a lease one or something with Windows 7 64-bit, probably for the same amount you'd pay for a version non - OEM Windows 7, pay a little more and you'll probably have a machine that could handle Windows 8 - If you wish.  ;-)

• Structures of the case - what is the best to use?

  Hello

  I am looking for a particular number and then make a decision on the basis that number and I trying to use a box structure to achieve this.

  I read in the package of data to a serial port and put my raw data in a 2d picture (a line represents a data packet), the piece of code that I have problems with making decisions based on what package I received (packets are letters A, B and C, where 65,66 and 67 ascii values).

  I then do an analysis on raw data and put it in a new 2d with similar data table other packages on a line in a 2d array.

  I used to use C, so usually I would write something like that.

  if(Number==65)

  The change from the position of the new table 2d (on the current line)

  Another yew (number is 66)

  The change from the position of the new table 2d (on the current line)

  Another yew (number is 67)

  The change from the position of the new table 2d (on the current line)

  on the other

  See the establishment of some kind of error message

  I have attached a jpeg of the particular piece of code with the broken wire left in then I hope that you will be able to see my problem. I have also attached my VI so you can see the code in context. What is the right way to use the structures of the case?

  I would like to know if you need more / info wants to explain something.

  Thank you

  Jack

  Hi Jack,

  Use a single structure of matter. You can connet your number directly to it. Create your case and write the value in it.

  See this link, please http://forums.ni.com/ni/board/message?board.id=170&thread.id=391012

  Mike

• What is the wmi provider host

  What is the wmi provider host

  Hi fuzzbob,
  What exactly is the problem you are having with "WMI provider host.
  
  WMI is the Microsoft of Web-Based Enterprise Management (WBEM) standard implementation.
   
  WBEM is an industry standard for how applications expose management instrumentation to external management tools.
   
  http://msdn.Microsoft.com/en-us/library/ms735120.aspx
   
  Hosting provider and security

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa392783%28V=vs.85%29.aspx

  
   
  Hope this information helps.

• What is the best way to transfer a hard drive of a computer with a motherboard dead to a new system?

  Moving an Installation of Vista

  Hi guys (and girls).

  I'm looking for the best way to transfer my computer drive "workaholic" into another machine... it's a Vista Home Premium x 86 OEM installation, but the motherboard has serious problems, so I'll pulling the reader (and its programs of many irreplaceable and owners) and transfer it into another machine. Yes, I know what are the rules regarding OEM licenses and I don't mean to skirt the rules, as I have a full VHPx86 commercial license collecting dust on the shelf that I was going to use, while I was looking for advice on the transfer:

  Should I go through the process of installation/installation (and following key change) on the original machine and transfer, then the drive in the new machine?

  Or can I move the disk to the new machine as that is, struggle with the driver updates and enter the new key when I reactivate the license?

  Thanks for any advice,

  JAM

  I suggest to install the copy retail hard disk once it's in the new computer.  It is more complicated than simply changing the product key.  You can probably use an upgrade of the repair on-site and avoid having to reinstall your programs and data.  However, you should make a backup of the image first, just in case something goes wrong.  The other option is a clean installation of the new OS and Windows Easy Transfer to move your files and settings.  It would need to reinstall your programs.  Personally, I recommend the latter.  If you go this route there are external to the file migwiz drive since you will be formatting the drive.

• Anyone of you happen to know what is the difference with a certificate in certificate authorities roots of trust?

  Hi all

  I am trying to solve the mystery of the ICP and have a question about the certificate stores, it would be very cool to have answered. Anyone of you happen to know what is the difference with a trusted certificate root, Enterprise Trust, intermediate Certification authorities CAs, publishers, to the third-party root CA, Active Directory object and so on?

  And does it matter where the physical store? Is there a difference if you use the registry, Local computer, group policy, AIA and so on?

  I noticed that you use the CA store root of trust to validate the server self-signed https, but apparently not so simple with tokens, access control with the EAP protocol network and so on.

  Best regards
  Alex

  Hi Alexander,.

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have a question about the certificate stores on your Windows 7 computer. I will certainly help you to the query.

  I suggest you refer to the of the items listed below and check if this is useful:

  Operating a Windows PKI: Certification Authority certificate life cycle and renewals

  https://blogs.technet.Microsoft.com/xdot509/2013/05/27/operating-a-Windows-PKI-certification-authority-certificate-lifecycle-and-renewals/

  ICP-the key usage attribute

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/ms679125%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  If the link above is not enough, then please visit the link below to post your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.